• 대한치과교정학회지
• /
• 제31권4호
• /
• pp.447-458
• /
• 2001

치아이동시 골대사에 있어 glycosaminoglycan의 역할에 대해 알아보고자 glycosaminoglycan의 주요 구성 성분인 chondroitin 4-sulfate(CH-4S)의 치주조직 내에서의 면역반응 정도 및 분포 양상을 백서 치아의 실험적 이동 과정에서 면역조직화학적으로 관찰하였다. 또한 사람 치주인대세포를 배양하여 여러 종류의 cytokine을 투여한 후 CH-4S의 발현 양상의 변화를 Western blot analysis를 통해 확인하여 다음과 같은 결과를 얻었다. 1. 치아이동에 반응하는 치수, 치주인대, 골모세포, 파골세포, 골세포 부위에서의 CH-4S 발현이 대조군보다 많았으나 상아질, 백악질에서의 CH-4S의 발현은 견인력 적용 기간에 관계없이 대조군과 큰 차이가 없었다. 2. 치수에서 CH-4S의 발현은 교정력을 가한 1일째에 크게 증가하였다가 7일째부터 감소되었으며 14일째에는 대조군과 차이가 없었다. 3. 치주인대에서 CH-4S의 발현은 주로 치조골 면을 따라 견인측에서 나타났는데 교정력을 가한 1일째에 가장 많은 발현을 보인 후 4일째부터 감소하기 시작하였다. 4. 골모세포와 파골세포 및 골세포에서 CH-4S의 발현은 4일째에 가장 많은 발현을 보였고 7일째 이후에는 크게 감소하였다. 3. 치주인대세포에 PDGF-BB를 투여한 경우 3일째에 가장 많은 CH-4S의 발현을 보였다. 6. 치주인대세포에 $TNF-\alpha$ 처리 시 배양 1일째에 CH-4S의 발현 감소를 보였다. 7. 치주인대세포에 PDGF-BB와 $TGF-\beta$를 혼합 투여 한 경우가 PDGF-BB 및 $TGF-\beta$를 단독 투여한 경우 보다 배양3일째에 CH-4S의 발현이 많았고 LPS나 $TNF-\alpha$ 투여군은 유사한 발현 감소를 보였다. 이상과 같이 교정적 치아이동시 시기 및 부위에 따라 glycosaminoglycan의 발현이 차이를 보이며, 치주인대세포에서도 cytokine의 자극에 따라 glycosaminoglycan의 발현이 변화하는 것으로 보아, glycosaminoglycan이 골대사에 있어 중요한 조절 인자로서의 역할을 하는 것으로 여겨진다.

• 대한기계학회논문집B
• /
• 제29권2호
• /
• pp.255-262
• /
• 2005

A comprehensive experimental and numerical study has been conducted to understand the influence of $CH_{3}Cl$ addition on $CH_4/O_2/N_2$ premixed flames under the oxygen enrichment. The laminar flame speeds of $CH_4/CH_{3}Cl/O_2/N_2$ premixed flames at room temperature and atmospheric pressure are experimentally measured using Bunsen nozzle flame technique, varying the amount of $CH_{3}Cl$ in the fuel, the equivalence ratio of the unburned mixture, and the level of the oxygen enrichment. The flame speeds predicted by a detailed chemical kinetic mechanism employed are found to be in excellent agreement with those deduced from experiments. Even though the molar amount of $CH_{3}Cl$ in a methane flame is increased, temperature at the postflame is not significantly varied, but the calculated heat release rate and emission index of NO are largely decreased for the oxygen enhanced flame. The function of $CH_{3}Cl$ as inhibitor on hydrocarbon flames becomes weakened as the level of the oxygen enrichment is increased from 0.21 to 0.5.

• 한국재료학회지
• /
• 제25권6호
• /
• pp.300-304
• /
• 2015

Nanorod ZnO and spherical nano ZnO for gas sensors were prepared by hydrothermal reaction method and hydrazine method, respectively. The nano-ZnO gas sensors were fabricated by a screen printing method on alumina substrates. The gas sensing properties were investigated for hydrocarbon gas. The effects of Co concentration on the structural and morphological properties of the nano ZnO:Co were investigated by X-ray diffraction and scanning electron microscope (SEM), respectively. XRD patterns revealed that nanorod and spherical ZnO:Co with a wurtzite structure were grown with (100), (002), (101) peaks. The sensitivity of nanorod and spherical ZnO:Co sensors was measured for 5 ppm $CH_4$ and $CH_3CH_2CH_3$ gas at room temperature by comparing the resistance in air with that in target gases. The highest sensitivity to the $CH_4$ and $CH_3CH_2CH_3$ gas of spherical nano ZnO:Co sensors was observed at Co 6 wt%. The spherical nano ZnO:Co sensor exhibited a higher sensitivity to hydrocarbon gas than nanorod ZnO.

• Bulletin of the Korean Chemical Society
• /
• 제30권7호
• /
• pp.1470-1474
• /
• 2009

Thermal and photochemistry of methyl iodide ($CH_3I)\;adsorbed\;on\;D_2O$ ice film on Cu(111) at 100 K were studied using temperature-programmed desorption (TPD) time-of-flight mass spectrometry (TOF-MS), X-ray and ultraviolet photoelectron spectroscopies. On the basis of TPD, multilayer and monolayer $CH_3I$ molecules desorb from $D_2O$ ice layer at 120 and 130 K, respectively. Photo-irradiation at 100 K exhibits dramatic changes in the TPD and I $3d_{5/2}\;XPS\;of\;CH_3I$ on ice film, due to a dramatic dissociation of $CH_3I$. The dissociation is likely activated by solvated electrons transferred from the metal substrate during photo-irradiation. No other photo-initiated reaction products were found within our instrumental detection limit. During photo-irradiation, the $CH_3I$, $CH_3$ and I could be trapped (or solvated) in ice film by rearrangement (and self-diffusion) of water molecules. A newly appeared parent molecular desorption peak at 145 K is attributed to trapped $CH_3I$. In addition, the $CH_3$ and I may diffuse through ice and chemisorb on Cu(111), indicated by TPD and I $d_{5/2}$ XPS taken with photo-irradiation time, respectively. No molecular ejection was found during photo-irradiation at 100 K. The work functions for $CH_3I/Cu(111),\;D_2O/Cu(111)\;and\;CH_3I/D_2$O/Cu(111) were all measured to be about 3.9 eV, 1.0 eV downward shift from that of clean Cu(111).

• 대한화학회지
• /
• 제39권3호
• /
• pp.198-203
• /
• 1995

두 개 산소가교형의 $[Mo_2O_4(H_2O)_6]_2^+$와 디티오 디카르복시기를 가진 리간드를 반응시켜 $Mo_2O_4(H_2O)_2L(L:\;C_3H_7CH(SCH_2COOH)_2,\;C_6H_5CH(SCH_2COOH)_2,\;CH_3OC_6H_4CH(SCH_2COOH)_2,\;C_5H_{10}C(SCH_2COOH)_2,\;C_3H_7C(CH_3)(SCH_2COOH)_2,\;C_3H_7CH(SCH_2CH_2COOH)_2,\;C_6H_5CH(SCH_2CH_2COOH)_2)$형의 착물을 합성하고 이들 착물의 구조를 분광학적인 방법(IR, $^1H$ NMR, UV-Visible)으로 그 구조를 규명한 결과 한 개의 리간드가 두 몰리브덴 금속에 킬레이트형으로 결합되며 말단 산소간에는 트란스형을 유지하고 있으며 이들 각 말단산소의 트란스에 $H_2O$가 한 개씩 배위되어 있다. 이들 착물들의 산화 환원전위값을 순환 전압전류법으로 수용액상에서 측정한 결과 환원전위는 -0.50∼-0.58 V(vs. SCE) 사이, 산화전위는 -0.41∼-0.43 V(vs. SCE) 사이에서 나타나며 이들 산화-환원 전류비 값이 거의 1에 가깝고 전위차이 값이 0.10 V 정도인 것으로 보아 두 개 산소 가교형의 기본 골격이 유지되는 가역적인 산화-환원 반응으로 추정된다.

• 한국전기전자재료학회논문지
• /
• 제25권12호
• /
• pp.974-978
• /
• 2012

The effect of Cu coating on the sensing properties of nano $SnO_2:Cu$ based sensors for the $CH_4$, $CH_3CH_2CH_3$ gas was studied. This work was focussed on investigating the change of sensitivity of nano $SnO_2:Cu$ based sensors for $CH_4$, $CH_3CH_2CH_3$ gas by Cu coating. Nano sized $SnO_2$ powders were prepared by solution reduction method using stannous chloride($SnCl_2{\cdot}2H_2O$), hydrazine($N_2H_2$) and NaOH and subsequent heat treatment. XRD patterns showed that nano $SnO_2$ powders with rutile structure were grown with (110), (101), (211) dominant peak. The particle size of nano $SnO_2:Cu$ powders at 8 wt% Cu was about 50 nm. $SnO_2$ particles were found to contain many pores, according to SEM analysis. The sensitivity of nano $SnO_2:Cu$ based sensors was measured for 5 ppm $CH_4$ gas and $CH_3CH_2CH_3$ gas at room temperature by comparing the resistance in air with that in target gases. The sensitivity for both $CH_4$ and $CH_3CH_2CH_3$ gases was improved by Cu coating on the nano $SnO_2$ surface. The response time and recovery time of the $SnO_2:Cu$ gas sensors for the $CH_4$ and $CH_3CH_2CH_3$ gases were 18~20 seconds, and 13~15 seconds, respectively.

• Korean Chemical Engineering Research
• /
• 제49권5호
• /
• pp.510-515
• /
• 2011

염화탄화수소의 고온열분해 반응에서 생성물 반응경로 특성을 파악하기 위해 $H_2$ 반응분위기에서 1,1-dichloroethylene($CH_2CCl_2$) 열분해반응 실험을 수행하였다. 열분해반응 실험은 등온관형반응기를 이용하여 반응온도 $650{\sim}900^{\circ}C$, 반응시간 0.3~2.0초에서 진행하였으며, 반응물 mole 분율은 전체 실험에서 $CH_2CCl_2:H_2$ = 4:96 일정하게 유지하였다. 반응물 $CH_2CCl_2$가 완전분해온도는(분해율 99% 이상) $825^{\circ}C$(반응시간 1초 기준)였으며, $H_2$ 반응분위기에서 $CH_2CCl_2$ 주요 분해반응경로는 H원자 추출 및 첨가교체치환 연쇄반응으로 파악되었다. $CH_2CCl_2$가 46% 분해되는 $700^{\circ}C$에서 1차 생성물로 $CH_2CHCl$가 28%로 가장 높은 농도로 검출되었다. $775^{\circ}C$ 이상에서는 탈염소화된 $C_2H_4$가 2차 생성물로 가장 많이 생성되었으며, 반응온도가 증가할수록 염소 원자수가 작은 화합물이 생성되었으며 이들 화합물은 열화학적으로 안정된 물질이다. $825^{\circ}C$ 이상의 고온반응영역에서 탈염소반응의 부산물인 HCl과 $C_2H_4$, $C_2H_6$, $CH_4$ $C_2H_2$ 등과 같은 열화학적으로 안정된 탄화수소가 주요생성물로 검출되었다. 본 연구에서 고찰된 반응계에서 분해와 생성물분포 특성을 고려하고 열화학이론 및 반응속도론을 기초로 주요 반응경로를 제시하였다.

• 한국재료학회지
• /
• 제23권4호
• /
• pp.211-214
• /
• 2013

The effects of a Ni coating on the sensing properties of nano ZnO:Ni based gas sensors were studied for $CH_4$ and $CH_3CH_2CH_3$ gases. Nano ZnO sensing materials were prepared by the hydrothermal reaction method. The Ni coatings on the nano ZnO surface were deposited by the hydrolysis of zinc chloride with $NH_4OH$. The weight % of Ni coating on the ZnO surface ranged from 0 to 10 %. The nano ZnO:Ni gas sensors were fabricated by a screen printing method on alumina substrates. The structural and morphological properties of the nano ZnO : Ni sensing materials were investigated by XRD, EDS, and SEM. The XRD patterns showed that nano ZnO : Ni powders with a wurtzite structure were grown with (1 0 0), (0 0 2), and (1 0 1) dominant peaks. The particle size of nano ZnO powders was about 250 nm. The sensitivity of nano ZnO:Ni based sensors for 5 ppm $CH_4$ gas and $CH_3CH_2CH_3$ gas was measured at room temperature by comparing the resistance in air with that in target gases. The highest sensitivity of the ZnO:Ni sensor to $CH_4$ gas and $CH_3CH_2CH_3$ gas was observed at Ni 4 wt%. The response and recovery times of 4 wt% Ni coated ZnO:Ni gas sensors were 14 s and 15 s, respectively.

• Bulletin of the Korean Chemical Society
• /
• 제16권6호
• /
• pp.543-546
• /
• 1995

The reaction between CH3 radicals and H2 was investigated behind incident shock waves at temperatures between 1308 and 1825 K by following the consumption of CH3 using a time resolved UV absorption method at 213.9 nm. The rate coefficient expression 1.10 X 1013 exp(-7370 K/T) cm3mol-1s-1 for the reaction of CH3 with H2 was derived.

• 한국전기전자재료학회논문지
• /
• 제24권7호
• /
• pp.589-593
• /
• 2011

[ $SnO_2$ ]nano powders were prepared by solution reduction method using tin chloride($SnCl_2{\cdot}2H_2O$), hydrazine($N_2H_4$) and NaOH. The $SnO_2$ thick films for gas sensors were fabricated by screen printing method on alumina substrates and annealed at $300^{\circ}C$ in air, respectively. XRD patterns of the $SnO_2$ nano powders showed the tetragonal structure with (110) dominant orientation. The particle size of $SnO_2$ nano powders at the ratio of $SnCl_2:N_2H_4$+NaOH= 1:6 was about 60 nm. The sensing characteristics were investigated by measuring the electrical resistance of each sensor in a test box. Sensitivity of $SnO_2$ gas sensor to 5 ppm $CH_4$gas and 5 ppm $CH_3CH_2CH_3$ gas was investigated for various $SnCl_2:N_2H_4$+NaOH proportion. The highest sensitivity to $CH_4$ gas and $CH_3CH_2CH_3$ gas of $SnO_2$ sensors was observed at the $SnCl_2:N_2H_4$+NaOH= 1:8 and $SnCl_2:N_2H_4$+NaOH= 1:6, respectively. Response and recovery times of $SnO_2$ gas sensors prepared by $SnCl_2:N_2H_4$+NaOH= 1:6 was about 40 s and 30 s, respectively.