• Title/Summary/Keyword: Ceramic thick film

검색결과 206건 처리시간 0.025초

EFG법에 의한 Sapphire Ribbon 단결정 성장 (Sapphire Ribbon Single Crystal Growth by EFG Method)

  • 박신서;류두형;정재우;최종건;오근호;손선기;변영재;전형탁
    • 한국세라믹학회지
    • /
    • 제27권6호
    • /
    • pp.783-789
    • /
    • 1990
  • Shaped crystal growth apparatus were made for sapphire ribbon single crystal growth. Sapphire ribbon single crystal are grown by EFG(Edge-defined Film-fed Growth) methdo for use as watch-glass and SOS(Silicon-On-Sapphire) devices. Sapphire ribbon crystals were grown to be 40min wide, 1.8mm thick, 96mm long. Therelationshiops between growth striation and surface roughness, with various growth rates, were investigated and compared. It was found that sapphire ribbon crystal is suitable for watch-glass by measuring the transmittance in the visible light region.

  • PDF

광전기 화학변환에 미치는 $TiO_2$ 전극의 두께와 첨가제의 영향 (Effects of the Thickness and Dopant on the Photoelectro- chemical Conversion in the Polycrystalline $TiO_2$ Electrodes)

  • 윤기현;강동헌
    • 한국세라믹학회지
    • /
    • 제21권3호
    • /
    • pp.266-270
    • /
    • 1984
  • The photoelectrochemical properties of the reduced $TiO_2$ceramic electrodes are investigated varying the thickness of the electrodes and the amounts of $Sb_2O_3$ as dopant. As the thickness of the undoped. $TiO_2$ceramic electrode increases the photocurrent tends to decrease. However for the R-F sputtered $TiO_2$ thin film electrodes the photocurrent tends to increase to about 1$\mu\textrm{m}$ thick and then decreases with increasing thickness. For the $TiO_2$ ceramic electrodes doped with $Sb_2O_3$ the photocurrent decreases with inreasing the amounts of dopant and in the case of rapid cooling in air without reduction treatment the photocurrent shows lower value. Also visible light excitation is observed at 500~550(nm) wavelength for the $TiO_2$ ceramic electrodes doped with $Sb_2O_3$comparing wtih the $TiO_2$ ceramic electrodes (~420nm)

  • PDF

솔-젤 회전 코팅법을 이용한 강유전성 $BaTiO_3$ 박막제조 (Preparation of Ferroelectric $Cr_3C_2$ Thin Film Using Sol-Gel Spin Coating Process)

  • 배호기;고태경
    • 한국세라믹학회지
    • /
    • 제31권7호
    • /
    • pp.795-803
    • /
    • 1994
  • Ferroelectric BaTiO3 thin film was produced using BaTi-ethoxide sol. This sol was prepared from BaTi-ethoxide by a partial hydrolysis with ammonia as a basic catalyst and ethylene glycol as a chelating agent. BaTiO3 thin film was prepared from three continuous spin-coating layers of the sol on bare Si(100) wafer at 2500 rpm followed by pyrolysis at $700^{\circ}C$ for 30 min. After the heat treatment, the film was 0.200$\pm$0.010 ${\mu}{\textrm}{m}$ thick and its grain size was 0.059 ${\mu}{\textrm}{m}$. On the other hand, electrical properties were measured for BaTiO3 thin film separately prepared on Au-deposited silicon wafer. The dielectric constant and loss of the BaTiO3 thin film at room temperature was 150~160 and 0.04 respectively, which was measured at 10 kHz and oscillation level of 0.1 V. In the measurements of the dielectric properties at high temperatures, it was observed that the capacitance of the thin film increases steeply, while the dielectric loss reaches maximum around 1$25^{\circ}C$, which corresponds a phase transition from tetragonal to cubic BaTiO3.

  • PDF

PO/Bi2O3 변화에 따른 Bi:YIC 단결정 후박의 성장 (Growth of Bi:YIG Thick Films by Change of PO/Bi2O3 Molar Ratio)

  • 윤석규;김근영;김용탁;정현민;임영민;윤대호
    • 한국세라믹학회지
    • /
    • 제39권6호
    • /
    • pp.589-593
    • /
    • 2002
  • Bi:Y$_3$Fe$_{5}$ $O_{12}$(Bi:YIG)를 (GdCa)$_3$(GaMgZr)$_{5}$ $O_{12}$(SGGG)기판 위에 Liquid Phase Epitaxy(LPE)법으로 단결정 후막을 성장시켰다 기판회전속도, 과냉도, 성장시간을 고정하여 PO/Bi$_2$ $O_3$ 몰 비 변화에 따른 성장된 가네트 결정의 격자상수 변화와 Bi 농도 분포를 조사하였다. PO/Bi$_2$ $O_3$ 몰 비가 감소함에 따라 성장된 가네트 결정의 격자상수하 Bi 농도는 증가하는 경향이 나타났으나, 가네트 결정의 두께가 증가됨에 따라 Bi 농도는 감소하는 경향이 나타났다.