• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.27 no.5
• /
• pp.256-262
• /
• 2017

Digital ink-jet printing technology using ceramic ink, which is thermally stable at high temperature above $1000^{\circ}C$, has an advantage of eco-friendly process applicable to manufacturing products with an excellent durability and various designs. Recently, replacement from conventional manufacturing process to digital process using ink-jet printing technique has been significantly accelerated in ceramic tile industry. In this study, we investigated ink-jet printability of ceramic ink on ceramic tile. Cyan, magenta, yellow, black ceramic inks, which are digital primary color of ink-jet printing, were printed on glazed surface of ceramic tiles, and their printabilities were comparatively analyzed. High temperature sintering process is generally required for manufacturing ceramic products, thus effect of sintering process on printed pattern of ceramic ink was also investigated by analyzing ink penetration depth and ink dot area.

• Journal of Conservation Science
• /
• v.32 no.4
• /
• pp.549-560
• /
• 2016

The purpose of this study is to identify the material characteristics of blackwares excavated from the Bonggok kiln site in Jinan-gun, Jeollabuk-do Province, South Korea, by scientific analyses and a reproduction experiment. Scientific analyses were conducted to determine the physical properties, chemical composition and for microscopic observation of blackwares. A reproduction experiment was also conducted by producing ceramic samples with black glaze, red ocher and limestone, and then cross sections of the samples were observed. The analysis results showed that all the excavated blackwares have similar properties such as chromaticity, specific gravity, absorption factor and porosity, but there is a difference depending on the crystallization of the ceramics. Thermal analysis showed that the exothermic peak was observed at about $1200^{\circ}C$, and crystal structure analysis indicated the presence of mullite. Hence, it can be concluded that the firing temperature of the excavated blackwares was around $1100-1200^{\circ}C$. Moreover, the glaze present on these blackwares has about 22% higher $Fe_2O_3$ content than those excavated from other places; however, the former has lower CaO content. For the reproduction experiment, samples were made using limestone as a flux and red ocher as a glaze. The results show that the cross section of the glaze layer of the reproduced sample have iron crystals with dendritic structures, similar to those present in the excavated black-wares. It is assumed that such iron crystals were formed during the process of melting and solidification of the iron oxide present in the blackwares.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.27 no.4
• /
• pp.154-161
• /
• 2017

$Zn_2TiO_4$, which is a progenitor of zinc crystallization, plays a significant role in controlling the crystallization of willemite ($Zn_2SiO_4$) in forming glaze at low temperatures. Thus, $Zn_2TiO_4$ was used to formulate stable willemite and to gain structural control. When synthesized 15 wt% of $Zn_2TiO_4$ is added to engobe and then applied, it can manipulate its crystallization and location. Additionally, when colorant is added to $Zn_2TiO_4$ and then applied to engobe, the mixture's colorant effect can be shown at crystallization. Certain characteristics of synthesized $Zn_2TiO_4$ enable various engobes to be applied to clay bodies. With a single glazing, the crystallization, location, and color of the crystals can be discretionarily regulated.

• Journal of the Korean Ceramic Society
• /
• v.15 no.2
• /
• pp.66-71
• /
• 1978

The cobalt blue spinel stains (main composition; CoO:$Al_2O_3$=1 : 1) in CoO-NiO-$Al_2O_$3 and $CoO-Al_2O_3-Cr_2O_3$ system were prepared by the calcination of each component oxides to be adequate for the factory. The color development, the change of the lattice constnat of the spinel and its application to colored glazes were studied. The results were summarized as follows. 1) In CoO-Al_2O_3$ spinel, the excess addition of each component hardly made any variation in lattice constantand alumina-rich spinel specimens caused the brilliant blue color fade. 2) An increase of $Ni^{2+}$ in $CoO-NiO-Al_2O_3$ system, made the lattice constnat of the $CoO-Al_2O_3$ spinel smaller, and an increase of $Cr^{3+}$ in $CoO-Al_2O_3-Cr_2O_3$, larger. 3) Glazed stains under lead glaze were colored nearly same dark blue color fade.

• Journal of the Korean Ceramic Society
• /
• v.13 no.3
• /
• pp.3-12
• /
• 1976

The corelation between surface tensions and surface appearances of SK O5a opaque glazes for earthen wares were investigated. The surface tension values were theoretically calculated by using Dietzel's factors of constituent oxides of glaze. The surface appearances of glazes, especially the pinhole phenomena were strongly effected by the surface tension values showing the following general tendencies: (1) In the range of 305±3 dynes/cm of surface tensions, glazes showed almost no pjnholes. (2) In the range of surface tensions less than 300 dynes/cm, the large numbers of small pinholes or eggshell textures were observed. (3) In the range of surface tensions higher than 310 dynes/cm, large and deep pinholes were observed. (4) The contact angles of glazes on the wall tile body substrate are in the good proportional agreement with the surface tension values calculated by Dietzel's factors.

• Journal of the Korean Ceramic Society
• /
• v.47 no.3
• /
• pp.237-243
• /
• 2010

This research examines using Rice Husk Ash, $Cr_2O_3$ in producing the pink-red color. It studies the formation of cassiterite and malayaite crystallites, the primary factors in producing the pink-red color, in relation to the application of $Cr_2O_3$ to examine its coloring mechanism. In addition, the research intends to identify the optimum synthesizing temperature and maintaining time for crystallization of malayaite, a stable pink-red colorization factor in high temperature glaze during $Cr_2O_3$-$SnO_2$-CaO-$SiO_2$ family pigment synthesis. The optimum substituting contents is Rice Husk Ash : Quartz = 1 : 2, and the optimum temperature is suggested at $1300^{\circ}C$ for 2 h based on analysis results by XRD, FT-IR, Raman microscope, SEM and UV-vis.

• Journal of the Korean Chemical Society
• /
• v.4 no.1
• /
• pp.27-37
• /
• 1957

High-fire stain is influenced by the conditions of glaze, firing atmosphere, etc. On the contrary, low fire stain is not influenced by those conditions but obtainable in arbitrary colors and it is indispensable for pottery decoration. It is difficult for us to study into the color in the sphere of result publication method and expression of color. Looking over the literature on this subject, I have been confronted with much difficulties, accordingly, I made a basic and systematic experiment as to six low-firing stains (blue, green, blue-green, brown black and yellow) and made it proper to be applied in these studies. On pigment, I confirmed the influence of the assistant coloring matter by mixing up the coloring matter and the assistant coloring matter in various proportions. On flux, I measured the melting point by making PbO-$SiO_2$ system and PbO-$B_2O_3-SiO_2$ system and decided the range of usage. Also I checked the coloring by making the pigment on laze with pigment and flux manufactured, and concluded the pigment and flux adaptation to it.

• Journal of the Korean Ceramic Society
• /
• v.44 no.10
• /
• pp.554-561
• /
• 2007

Synthesis and characterization of pigments by using $Fe_2O_3,\;CoO,\;Cr_2O_3\;and\;MnO_2$ were undertaken. The resulting pigments were characterized by using XRD, SEM, FT-IR and UV-Vis spectrophotometer. The color of glazed tiles containing 6 wt% pigment changed from dark green to black depending on the compositions of used materials. Pigments were calcined with mixed materials at $1350^{\circ}C$, and the dark green and dark brown color were obtained. Pigments were used to determine possible interactions between a pigment and a glaze.

• Journal of Industrial Technology
• /
• v.3
• /
• pp.65-68
• /
• 1983

There are chief concerns every ceramist must keep in mind when firing a single kiln : Being able to read and control the kilns temperature as the firing progresses and as the kiln cools after firing. Controlling the atmosphere of the kiln in order to create desired glaze and clay body effects. Getting the most efficient use from the fuel-the most heat possible from the least fuel possible. The more exactly, author can control these factors with some result.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.11a
• /
• pp.317-318
• /
• 2005

This paper presents the analysis on the properties of porcelain insulators with the manufactured year. The domestic porcelain insulators manufactured in 1995, 1997, and 2002 and the imported one are prepared. The content of alumina was increased with the manufactured year, and the hardness of ceramic parts showed the same trend. Moreover, the distribution and the size of pore were more decreased and reduced on the junction parts between the glaze and the ceramic. Therefore, we concluded that the domestic porcelain insulators have been improved with the lapse of time.