• Journal of the korean academy of Pediatric Dentistry
• /
• v.26 no.1
• /
• pp.1-13
• /
• 1999

To study the caries patterns in primary dentition, 719 preschool children, 4-6 years old, were examined for their caries activity(salivary reductase activity) and caries experience of individual teeth. Teeth groups were made by cluster analysis using dft indexes of individual teeth as criteria. The six major teeth groups in the order of dft index from high to low were (1) lower primary molars, (2) upper primary molars, (3) upper central incisor, (4) upper lateral incisor, (5) canines, and (6) lower incisors. There were significant differences in dft index between teeth groups except upper lateral incisor and canines. Upper and lower primary molars showed the highest correlation in dft index, and the next couples were upper central incisors and upper lateral incisors, upper lateral incisor and canines, upper central incisor and canines, upper lateral incisor and upper primary molars, and canines and upper primary molars in descending order. Upper first primary molar showed the greatest differences in dft index between caries activity levels.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.6 no.2
• /
• pp.171-178
• /
• 2003

Four thermo-tolerant lines of silkworm, Bombyx mori, (L.) viz., A HT, B HT (Chinese type) and F HT, G HT (Japanese type) were evolved by utilizing the breeding resource material (identified from initial screening at a temperature of 31 ${\pm} 1^{\circ}C$ and relative humidity 85 ${\pm}$ 5%) through conventional breeding. These tolerant lines were crossed with productive breeds and forty four hybrids were evaluated on eight economic traits by the Multiple Trait Evaluation Index Method. Ten hybrids were short-listed based on the average evaluation index value larger than 50 for eight economic traits studied. The identified ten hybrids recorded higher index values (＞ 50) for most of the traits studied. Single hybrid G ${\times}$ CSR12 indicated average index value larger than 50 for six traits viz., pupation number (58), cocoon weight (67), shell weight (65), average filament length (74), raw silk % (69), reelability % (51) except for shell ratio % (41). The standard deviation of the cocoons in the above hybrid was 8.41 in the hybrid cocoon length and width measurement. However, two selected hybrids viz., A ${\times}$ CSR5 and G ${\times}$ CSR13 recorded average index value larger than 50 for all the traits viz., pupation number (57, 60), cocoon weight (50, 54), shell weight (56, 57), shell ratio percentage (59, 53), average filament length (55, 60), raw silk percentage (63, 67) and reelability percentage (53, 53). The standard deviation of the cocoons in the two selected hybrids viz., A ${\times}$ CSR5 and G ${\times}$ CSR13 was 8.41 and 8.06 respectively in the cocoon length and width measurement.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.4 no.2
• /
• pp.143-147
• /
• 2002

Studies on the interrelationship between biological yield and harvest index, and their association with shoot rearing were carried out in 9 promising mulberry genotypes, which indicated significant variations among genotypes. Biological yield had close association with leaf yield components indicating that they are inter-related for higher productivity in mulberry, Biological yield revealed highly significant positive correlation with important leaf yield components. However height of the longest branch showed negative correlation with biological yield. Genotypes with higher biological yield associated with low ratio of stem weight to leaf weight and high Harvest index on dry weight basis are to be selected for shoot rearing. Biological yield recorded on fresh weight basis had less impact on the present study in comparison to dry weight basis.

• Journal of Forest and Environmental Science
• /
• v.27 no.1
• /
• pp.1-15
• /
• 2011

The present study was undertaken in middle altitudinal (1500 to 2500 masl) moist temperate forest of Mandal-Chopta area in the Garhwal region of Uttarakhand, India. The aim of the present study was to assess the variation in species composition and diversity in different vegetation layers viz. herb, shrub and tree, at different altitudes. Shannon-Wiener diversity index ($\bar{H}$), $Nha^{-1}$, total basal cover per hectare (G), Simpson concentration of dominance, Pielou Equitability, species richness (SR), Margalef index, Menheink index of species richness and ${\beta}$-diversity were calculated to understand community composition. Tree G ranged from 84.25 to 35.08 $m^2ha^{-1}$ and total stem density varied from 990 to 1470 Nha-1. Total SR (herb, shrub and trees) among different forest types ranged between 31 and 58. Maximum G of herb and shrub layers was recorded at lower altitudes between 1500 and 1650 masl. ${\beta}$-diversity was higher in herb layers as compared to tree and shrub layers. Dominance-diversity curves were also drawn to ascertain resource apportionment among various species in different forest types. Values of species diversity, $\bar{H}$, $Nha^{-1}$ and G were higher in the study area as compared to similar forests growing in other parts of Uttarakhand Himalaya.

• Journal of Plant Biology
• /
• v.18 no.3
• /
• pp.87-91
• /
• 1975

Dry matter production of herb community in the Central Korea was studied. Generally, the maximum standing crop in the Central Korea can be observed during the period from July through September with somewhat differences between the herb communities of different floristic composition. Differences in standing crop between the communities of similar floristic composition in different regiions were insignificant while those between different floristitc community were relatively great, ranging from 308.7 d.w.g/$m^2$ in Phragmites prosturatus community. It seems that regional difference in standing crop of herb community of the same floristic composition in the Central Korea is greatly influenced by grazing effect rather than any other conditions. The maximum leaf area index (LAI) of different herb communities was observed during the period from July through September, ranging from 3.0 in Plantago asiatica community to 16.0 in Phragnites longivalvis community.

• Journal of the Korean Society of Tobacco Science
• /
• v.26 no.2 s.52
• /
• pp.135-140
• /
• 2004

To evaluate utilization of tobacco dust as a raw material of reconstituted tobacco, tobacco dust was applied to the paper-making reconstituted tobacco process and we examined the chemical and physical properties of the reconstituted tobacco and raw materials. The use of tobacco dust in the manufacture of reconstituted tobacco had no measurable adverse effects on the chemical properties of the reconstituted tobacco when added to the reconstituted tobacco formula at levels of $3\%,\;5\%,\;7\%\;and\;10\%$ instead of foreign bright stem. Filling power and fragibility index of the reconstituted tobacco was slightly decreased with increasing tobacco dust levels, but it was not significant change. However, when the level of $10\%$ tobacco dust was added to the reconstituted tobacco formula, the tensile index based basis weight was rapidly decreased.

• Structural Engineering and Mechanics
• /
• v.39 no.1
• /
• pp.1-20
• /
• 2011

This study investigates the feasibility of detecting structural damage using the HHT method. A damage detection index, the ratio of bandwidth (RB) is proposed. This index is highly correlated or approximately equal to the change of equivalent damping ratio for an intact structure incurring damage from strong ground motions. Based on an analysis of shaking table test data from benchmark models subjected to adjusted Kobe and El Centro earthquakes, the damage detection index is evaluated using the Hilbert-Huang Transform (HHT) and the Fast Fourier Transform (FFT) methods, respectively. Results indicate that, when the response of the structure is in the elastic region, the RB value only slightly changes in both the HHT and the FFT spectra. Additionally, RB values estimated from the HHT spectra vs. the PGA values change incrementally when the structure response is nonlinear i.e., member yielding occurs, but not in the RB curve from the FFT spectra. Moreover, the RB value of the top floor changes more than those from the other floors. Furthermore, structural damage is detected only when using the acceleration response data from the top floor. Therefore, the ratio of bandwidth RB estimated from the smoothed HHT spectra is an effective and sensitive damage index for detecting structural damage. Results of this study also demonstrate that the HHT is a powerful method in analyzing the nonlinear responses of steel structures to strong ground motions.

• Journal of Korean Society for Atmospheric Environment
• /
• v.31 no.1
• /
• pp.41-53
• /
• 2015

This study was performed to assess the level of ozone risk for wheat in the central region of the Korean Peninsula by using two ozone indices, the ozone-concentration based index (AOT40) and the ozone-flux based index ($AF_{st}Y$), and to analyze the relationship between the two indices. In the present study for $AF_{st}Y$ calculation, the Monin-Obukhov length was estimated using the Pasquill stability class which was determined from routine meteorological data such as wind speed, solar radiation and cloudiness. The AOT40 and $AF_{st}6$ indices were calculated for wheat at 3 sites in the central region of the Korean Peninsula during a period of 3 months from April 1 to June 30, 2006. It should be noted that the estimation of ozone index $AF_{st}6$ in this study was performed under several assumptions. The results for both indices, AOT40 and $AF_{st}6$, showed that agricultural crops could be seriously damaged by ozone in the local region of the Korean Peninsula.

• The Journal of Asian Finance, Economics and Business
• /
• v.2 no.4
• /
• pp.31-38
• /
• 2015

During the last two decades the idea that central bank independence and transparency helps to maintain price stability, became popular among economists and central bankers. Many countries' governments give their monetary authorities higher independence and transparency to achieve the price stability goal. However, emerging countries such as Kazakhstan, suffer from high inflation. This inflation occurs largely due to a low level of independence and transparency of central banks. This research project measures the current level of independence and transparency of central bank of Kazakhstan. Indices were used to measure central bank independence and transparency. Central bank independence was measured by two types of indices: based on central bank laws (legal independence) and based on central banks governor's turnover (TOR). Developing countries have a weak legal framework, implying that a legal independence index cannot be appropriate to use as a measures of actual independence. Therefore, by paying attention to the other two indices, we can say that the central bank of Kazakhstan has a low level of independence and transparency. This, in turn, can be one of the causes of high inflation in Kazakhstan.

• Geomechanics and Engineering
• /
• v.12 no.2
• /
• pp.313-326
• /
• 2017

Based on the reliability theory and limit analysis method, the roof stability of a shallow tunnel is investigated under the condition of surface settlement. Nonlinear Hoek-Brown failure criterion is adopted in the present analysis. With the consideration of surface settlement, the internal energy and external work are calculated. Equating the rate of energy dissipation to the external rate of work, the expression of support pressure is derived. With the help of variational approach, a performance function is proposed to reliability analysis. Improved response surface method is used to calculate the Hasofer-Lind reliability index and the failure probability. In order to assess the validity of the present results, Monte-Carlo simulation is performed to examine the correctness. Sensitivity analysis is used to estimate the influence of different variables on reliability index. Among random variables, the unit weight significantly affects the reliability index. It is found that the greater coefficient of variation of variables lead to the higher failure probability. On the basis of the discussions, the reliability-based design is achieved to calculate the required tunnel support pressure under different situations when the target reliability index is obtained.