• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• v.12 no.1
• /
• pp.75-78
• /
• 2009

A peritoneal loose body is reported to develop because of torsion and separation of the epiploic appendages. The condition is usually symptomless and may be incidentally during abdominal surgery or autopsy. It usually occurs in middle-aged and elderly adults and is very rare in children. In this paper, we report a case of a peritoneal loose body in the pelvic cavity of a 10-year old-girl who presented with urinary frequency and left lower abdominal discomfort. A second plain X-ray film of the abdomen, obtained before surgery, in a different view than the first, revealed that the calcified mass had migrated to a lower position. The mass was laparoscopically resected, and histological examination revealed it to be a fibrotic nodule with central liquefaction and calcification.

• Journal of Multimedia Information System
• /
• v.5 no.1
• /
• pp.47-52
• /
• 2018

We have developed an electromagnetic generator to bury in subcutaneous area or abdominal cavity of the birds. As we can't use a solar battery, it is extremely difficult to supply a power for subcutaneous implantation such as biosensors under the skin due to the darkness environment. We are aiming to test the antigen-antibody reaction to confirm an avian influenza. One solution is a very small generator with the electromagnetic induction coil. We attached the developed coil to chickens and pheasants and recorded the electric potential generated as the chicken walked and the pheasant flew. The electric potential generated with physical simulator is equal to or exceeds the 7 V peak-to-peak at maximum by 560/min of flapping of wings. Even if we account for the junction voltage of the diode (200 mV), efficient charging of the double-layer capacitor is possible with the voltage doubler rectifier. If we increase the voltage, other problems arise, including the high-voltage insulation of the double-layer capacitor. For this reason, we believe the power generated to be sufficient for subcutaneous area of birds. The efficiency, magnetic 2 mm in length and coil 15mm in length, if axial direction is rectified, the magnetic flux density given to the coil could calculated to 7.1 % and generated power average 0.47mW. The improvements in size and wire insulation are expected in the future.

• Restorative Dentistry and Endodontics
• /
• v.45 no.1
• /
• pp.5.1-5.8
• /
• 2020

Objectives: The obturation quality of MTA, Biodentine, Total Fill BC root canal sealer (RCS), and warm gutta-percha (WGP) in teeth with simulated internal root resorption (IRR) was evaluated by using micro-computed tomography. Materials and Methods: Standardized IRR cavities were created using 40 extracted maxillary central incisor teeth and randomly assigned into 4 groups (n = 10). IRR cavities were filled with MTA, Biodentine, Total Fill BC RCS (bulk-fill form) and WGP + Total Fill BC RCS. Percentage of voids between resorptive cavity walls and obturation material (external void), and inside the filling materials (internal voids) were measured. Results: Total Fill BC sealer in the bulk-fill form presented significantly highest values of external and internal void percentages (p < 0.05). Biodentine showed a significantly lowest external void percentage (p < 0.05). WGP + Total Fill BC RCS presented significantly lower values of internal void percentages than all groups (p < 0.05), except Biodentine (p > 0.05). Conclusion: None of the filling materials were created void-free obturation in resorption cavities. Biodentine may favor its application in teeth with IRR over Angelus MTA and bulkfill form of Total Fill BC.

• Restorative Dentistry and Endodontics
• /
• v.14 no.2
• /
• pp.1-4
• /
• 1989

To determine the thickness of coronal hard structure the minimal distance between pupal surface and outer surface of crown was measured by means of Bowley gauge on extracted first molars. Upper(28 teeth) and lower(24 teeth) were carefully collected from 30-39 years of age and male. The teeth were split mesio-distally through central pit. On the split surface various part which are deeply related in cavity preparation were measured (schematic drawing). The results were as follows: A : Distance from mesio-cervical enamel to pulp chamber surface. upper $2.63{\pm}0.19$(mm) Lower $2.18{\pm}0.27$(um) B : Distance from mesial chamber ceiling to mesial surface upper $2.75{\pm}0.34$ Lower $2.62{\pm}0.31$ C : Distance from mesial chamber ceiling to occlusal surface upper $3.82{\pm}0.51$ Lower $3.49{\pm}0.50$ D : Distance from distal chamber ceiling to occlusal surface upper $4.28{\pm}0.69$ Lower $3.90{\pm}0.52$ E : Distance from distal chamber ceiling to distal surface upper $2.79{\pm}0.45$ Lower $2.41{\pm}0.40$ F : Distance from disto cervical enamel to pulp chamber surface upper $2.49{\pm}0.24$ Lower $2.39{\pm}0.25$.

• Current Optics and Photonics
• /
• v.2 no.4
• /
• pp.356-360
• /
• 2018

We demonstrate continuous-wave operation of an all-fiber thulium-holmium codoped laser operating at a wavelength of 1706.3 nm. To realize laser operation in the short-wavelength region of the emission-band edge of thulium in silica fiber, we employ fiber Bragg gratings having resonant reflection at a wavelength around 1700 nm as a wavelength-selective mirror in an all-fiber cavity scheme. We first examine the performance of the laser by adjusting the central wavelength of the in-band pump source. Although a pump source possessing a longer wavelength is observed to provide reduced laser threshold power and increased slope efficiency, because of the characteristics of spectral response in the gain fiber, we find that the optimal pump wavelength is 1565 nm to obtain maximum laser output power for a given system. We further explore the properties of the laser by varying the fiber gain length from 1 m to 1.4 m, for the purpose of power scaling. It is revealed that the laser shows optimal performance in terms of output power and slope efficiency at a gain length of 1.3 m, where we obtain a maximum output power of 249 mW for an applied pump power of 2.1 W. A maximum slope efficiency is also estimated to be 23% under these conditions.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.12 no.1
• /
• pp.21-26
• /
• 1982

A radiologic study of 139 dentigerous cysts (128 patients) indicated the followings: 1. There was higher incidence in males (62.99%) than in females (37.01%). The most common age group was 11-20 years and the average age was 23.6 years. 2. The most common clinical symptoms was swelling of the jaws (49 cases, 33.09%), and no symptoms was presented in 26 cases (18.71%). 3. Dentigerous cysts were found to be slightly more common in the maxilla (53.24%) than in the mandible (46.76%) and there was almost no difference in occurance between right and left side. The maxillary supernumerary tooth was the most frequent site of the dentigerous cyst and no dentigerous cyst was found to be related to a deciduous tooth. 4. The most common radiographic findings was root resorption of the adjacent teeth (33.09%), and the central dentigerous cysts were 78 cases (56.12%), the lateral dentigerous cysts were 61 cases (43.88%). 5. The increased radiolucency at the crown portion of the tooth in a cystic cavity was seen in 44 cases (31.65%), and a case of dentigerous cyst was found in a edentulous patient, and 16 cases of multiple dentigerous cysts were found in 5 patients. 6. The ameloblastic changes in 8 cases, the keratinization of the cyst wall in 2 cases, and a case of epidermoid carcinoma were confirmed microscopically.

• KSBB Journal
• /
• v.26 no.2
• /
• pp.119-125
• /
• 2011

In the synthesis of nanoparticles, much attention has been paid to regulating the particle size. There has been a possible evident that using the central cavity (core) of the protein ferritin has a greatly significant influence on it because the core can generate the nanometer-sized mineral particles of variable metal ions. In this report, recombinant human L-ferritins produced from Saccharomyces cerevisiae were purified and their molecular properties were characterized. The cDNA for human ferritin L chain was also expressed in another host such as Escherichia coli, and the properties of recombinant L-ferritins were compared. From isoelectric focusing experiment, the L-ferritin from the recombinant yeast showed no indication of N-glycosylation. Some post-translational modifications other than N-glycosylation were speculated in the L-ferritins from yeast. A difference was made in the L-ferritins in their iron uptake rates and the initial rate of the L-ferritin from yeast was slightly increased. The reconstitution yield and size distribution of the core minerals were analyzed in the L-ferritins by transmission electron microscopy. The L-ferritin from yeast with higher reconstitution yield (54.5%) showed slightly larger sizes (mean 6.92 nm) with narrower size distribution than the L-ferritin from E. coli. It is, in conclusion, speculated that L-ferritin from yeast is relatively superior to the other, in view of the size of nanoparticle and its relative homogeneity.

• Archives of Craniofacial Surgery
• /
• v.18 no.4
• /
• pp.261-263
• /
• 2017

Anisakis is a parasite with life cycles involving fish and marine mammals. Human infection, anisakiasis, occurs with the ingestion of raw infected seafood and usually presents with acute or chronic gastrointestinal symptoms from esophageal or gastric invasion. We report a rare caseinvolving the oral cavity. A 39-year-old male presented with oral and sub-sternal pain of one day duration after eating raw cuttlefish. Physical examination revealed areas of erythema and edema with a central white foreign particle on the labial and buccal mucosa. With microscopic field we could remove the foreign material from the lesions. The foreign material was confirmed to be Anisakis. Anisakis was also removed from the esophagus by esophagogastroduodenoscopy. The patient was discharged the following day without complication. Anisakiasis is frequently reported in Korea and Japan, countries where raw seafood ingestion is popular. The symptoms of acute anisakiasis include pain, nausea, and vomiting and usually begin 2-12 hours after ingestion. The differential diagnosis includes food poisoning, acute gastritis, and acute pancreatitis. A history of raw seafood ingestion is important to the diagnosis of anisakiasis. Treatment is complete removal of the Anisakis to relieve acute symptoms and prevent chronic granulomatous inflammation.

• The Journal of the Korean dental association
• /
• v.53 no.4
• /
• pp.238-248
• /
• 2015

Sleep related breathing disorders(SRBDs) are a group of diseases accompanied by difficulties in respiration and ventilation during sleep. Central sleep apnea, obstructive sleep apnea(OSA), sleep-related hypoventilation, and hypoxemia disorder are included in this disease entity. OSA is known to be the most common SRBDs and studies show its significant correlation with general health problems including hypertension, arrhythmia, diabetes, and metabolic syndrome. The diagnostic process of OSA is composed of physical examinations of the head and neck area and also the oral cavity. Radiologic studies including cephalography, CT, MRI, and fluoroscopy assist in identifying the site of obstruction. However, polysomnography(PSG) is still considered the gold standard for the diagnosis of OSA since it offers both qualitative and quantitative recording of the events during a whole night's sleep. The dentist who is trained in sleep medicine can easily identify patients with the risk of OSA starting from simple questions and screening questionnaires. Diagnosis is the first step to treatment and considering the high rate of under-diagnosis for OSA the dentist may play a substantial role in the diagnosis and treatment of OSA which will eventually lead to the well-being of the patient as a whole person. So the objective of this article is to assist dental professionals in gaining knowledge and insight of the diagnostic measures for OSA including PSG.

• Nuclear Engineering and Technology
• /
• v.48 no.2
• /
• pp.448-456
• /
• 2016

Severe accident scenarios in nuclear reactors, such as nuclear meltdown, reveal that an extremely hot molten core may fall into the nuclear reactor cavity and seriously affect the safety of the nuclear containment vessel due to the chain reaction caused by the reaction between the molten core and concrete. This paper reports on research focused on the type and amount of vapor produced during the reaction between a high-temperature molten core and concrete, as well as on the erosion rate of concrete and the heat transfer characteristics at its vicinity. This study identifies themass fraction and melting temperature as the most influential properties of concrete necessary for a safety analysis conducted in relation to the thermal interaction between the molten core and the basemat concrete. The types of concrete that are actually used in nuclear reactor cavities were investigated. The $H_2O$ content in concrete required for the computation of the relative amount of gases generated by the chemical reaction of the vapor, the quantity of $CO_2$ necessary for computing the cooling speed of the molten core, and the melting temperature of concrete are evaluated experimentally for the molten core-concrete interaction analysis.