• 한국건축시공학회지
• /
• 제17권2호
• /
• pp.183-189
• /
• 2017

플라이애시는 시멘트 계열 재료의 혼화재료로서 널리 사용되고 있는 재료이다. 다만, 플라이애시는 화력발전소의 석탄재를 포집하여 정제과정을 거친 재료로서 정제과정의 에너지 소모 및 유통과정에서의 품질 확보가 중요하다. 이에 본 연구에서는 플라이애시 생산과정 중 발생하는 세 가지 종류의 다른 품질의 석탄재를 대상으로 각각의 입자조건과 시멘트 페이스트 상태에서 레올로지 거동을 평가하였다. 실험결과 리젝트 애시는 작은 석탄재 입자가 응집되어 굳어진 다공질의 큰 입자로 구성되어 있었고, 그러한 이유로 시멘트 페이스트에 포함될 경우 공기량이 높게 측정되는 경향이 나타났다. 유동성 측면에서는 석탄재가 치환되는 경우 유동성이 증진되는 양상을 보였으며 특히 점도 측면에서는 입자조건에 따라 점도를 조정할 수도 있었다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2017년도 추계 학술논문 발표대회
• /
• pp.149-150
• /
• 2017

It is known that physical and chemical changes of cement hydrates cause problems in the volume stability of concrete. In order to overcome these problems, there is a growing interest in research on mixing technology of cement-based materials and nanomaterials. Among the nanomaterials, carbon nanotubes (CNTs) are attracting attention due to their excellent mechanical properties. The CNTs are made of cylindrically shaped graphene sheets. According to the number of sheets, single-walled carbon nanotubes (SWCNTs) and multi-walled carbon nanotubes (MWCNTs) are classified. Although the SWCNT has superior mechanical properties, the research using MWCNT is vigorous due to the difficulty of marketability and manufacturing, but the research using SWCNT is insufficient. In this study, we investigate the effect of SWCNT on the formation of hydrate of cement paste by observing the microstructure of broken cement paste after measuring the flexural strength of cement paste with SWCNT dispersion.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 가을 학술발표회 논문집(II)
• /
• pp.1221-1226
• /
• 2000

Influence of characters of fly ash on the fluidity of cement paste with polycarboxylic acid type superplasticizer has been investigated in connection with the particle size of distribution, unburned carbon content, specific surface area and shape of fly ash. The fluidity of paste is increased with increasing roundness of fly ash and it is decreased with increasing n-value of Rosin-Rammler distribution function. There is a linear correlation between roundness/n-value and fluidity of fly ash cement paste.

• 한국건설순환자원학회논문집
• /
• 제10권3호
• /
• pp.235-242
• /
• 2022

CNT 보강 시멘트 페이스트의 침투 임계점은 자기감지 콘크리트의 감지 성능 극대화를 위한 최적 CNT 혼입량과 밀접한 관련이 있다. 하지만 침투임계점은 사용된 시멘트, CNT 그리고 물 시멘트 비에 따라 다양한 값을 가지며, 이를 얻기 위해서는 실험기반의 다수의 시행착오가 불가피하다. 이 연구는 CNT 보강 시멘트 페이스트의 침투 임계점 예측을 위한 침투 시뮬레이션 모델을 제안하였다. 제안된 모델은 CNT 그리고 시멘트 특성을 사용하여 CNT 혼입량에 따른 침투를 시뮬레이션할 수 있으며, 이를 위해 응집된 CNT 입자 수 개념이 사용되었다. 침투 시뮬레이션 과정은 미수화 시멘트 페이스트 모델 형성, CNT 랜덤분산, 그리고 침투 조사의 순서로 구성된다. 시뮬레이션에는 물 시멘트 비가 0.4-0.6인 CNT 보강 시멘트 페이스트가 사용되었으며, 시뮬레이션 된 침투 임계점은 문헌 결과 대비 최대 7.5 %의 시뮬레이션 잔차율로 높은 정확도를 보였다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1999년도 봄 학술발표회 논문집(I)
• /
• pp.160-165
• /
• 1999

Osmotic pressure induced by semi-permeability of hardened cement pasts and cement mortar was studied, which was considered to be a cause of failure such as separation and blistering of floor coatings or wall coatings from the concrete substrate. The specimens with a water cement ratio of 45, 60 and 75% were installed between the solution of sodium chloride and distilled water. First, we measured water flux from distilled water to sodium chloride and the ion flux of Na+ and Cl- through the specimens. Then, we measured osmotic pressure induced by semi-permeability of the specimens using an apparatus which was specially developed for this study. It was made clear that hardened cement paste and cement mortar have properties of semipermeability, and the osmotic pressure is closely related to their water cement ratio. Finally, we calculated the osmotic pressure according to Staverman's equation, which was obtained for organic membranes, and tried to explain quantitatively the observed pressure.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 가을학술발표대회논문집
• /
• pp.93-94
• /
• 2023

This study evaluated the mechanical properties and microstructure of calcium silicate cement based paste according to carbonation curing conditions. As a result, both compressive strength and carbonation depth increased with the carbonation curing period.

• Computers and Concrete
• /
• 제11권1호
• /
• pp.39-49
• /
• 2013

The use of ground fly ash in concrete can increase the risk of slump loss due to the drastic surface change of the particles after the grinding treatment and the accelerated reaction compared to the untreated ash. This study is aimed at the early age hydration and time-dependent rheology changes of cement paste containing ground fly ash. An original fly ash is ground into different fineness and the hydration of cement paste containing the ground fly ash is monitored with the ultrasound propagation method. The zeta potentials of the solid particles are measured and the changes of rheological parameters of the cement pastes with time are analyzed with a rheometer. A particle packing model is used to probe packing of the solid particles. The results show that the early age hydration of the paste is strongly promoted by replacing Portland cement with fly ash up to 30 percent (by mass), causing increase of the yield stress of the paste. The viscosity of a paste containing ground fly ash is lower than that containing the untreated ash, which is explained by the denser packing of the solid particles.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2019년도 춘계 학술논문 발표대회
• /
• pp.114-115
• /
• 2019

When concrete is exposed to fire, the decomposition of Portland cement paste results in critical damage to the concrete structure of a building. Although the behavior of cement pastes after heating provides crucial information with respect to the reuse of the building exposed to fire, the recovery process of the damaged concrete structure has not yet been fully elucidated. In addition, research on appropriate additives such as carbon nanotube (CNT) has been increasing recently, however, investigation of CNT incorporated cement paste after decomposition of CNT by high temperature is not fully investigated. In this study, we investigated the physicochemical properties of CNT incorporated cement paste under different temperatures (200℃, 500℃ and 800℃). Also, the effects of different rehydration conditions (20℃ 60% RH and in water for different curing times) on the recovery of the paste were studied. The changes in tensile and compressive strength, surface observation of the specimens were characterized. In addition, the decomposition and formation of hydrates in the paste due to the heating process were studied using X-ray diffraction.

• 한국건축시공학회지
• /
• 제11권1호
• /
• pp.83-90
• /
• 2011

The purpose of this research is to investigate the effect of AFm formation on the stiffening process of cement paste. High and low alkali sulfate clinkers were used for the experiments. The flow and stiffening behavior of cement paste was investigated using modified ASTM C403 penetration resistance test and oscillatory shear rheology. X-ray powder diffraction (XRD) was used for phase identification associated with stiffening of the paste. It was found from the results that low alkali clinker mixture produced very strong premature stiffening whereas high alkali clinker mixture did not cause premature stiffening. This is because of the large amount of alkali sulfate present in the clinker. Addition of calcium and sodium chloride to the high alkali clinker mixture caused faster stiffening and set.

• 한국세라믹학회지
• /
• 제27권5호
• /
• pp.589-596
• /
• 1990

In this study, the freezing and thawing resistance in sea-water of hardened cement paste was investigated by adding slag, diatomaceous earth and fly ash as blending materials and air entraining agent and superplasticizer as admixtures to the cement paste. The structure of hardened cement pate was densified by potential hydraulic properties and pozzolan reactivities of materials and the freezing and thawing resistance of the paste was improved with the effect blending materials and admixtures. As the blending materials were added to the paste, the quantity of C3A was relatively reduced and the formation of expansive ettringite was suppressed to decrease the penetration of sea-water or Cl-, SO42-ion, and then freeze-thaw resistance was enhanced. Particulary, when 40% of slag was mixed, the resistance was excellent.