• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2001년도 춘계학술대회 논문집
• /
• pp.235-238
• /
• 2001

Milli-structure components are classified as a component group whose size is between macro and micro scales, that is, about less than 20mm and larger than 1mm. The forming of these components has a typical phenomenon of bulk deformation with thin sheets because of the forming size. In this study, milli-structure rectangular cup drawing is analyzed and measured using the finite element method and experiment. Generally, milli-structure containers or cases like cellular phone vibrator consist of rectangular-shaped drawing to save installation space. A systematic approach is established for the design and the experiment of the forming processes for rectangular milli-structure cases. To verify the simulation results, the experimental investigations were also carried out on a real industrial product. The numerical analysis by FEM shows good agreement with the experimental results in view of the deformation shape of the product.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2000년도 추계학술대회 논문집
• /
• pp.97-100
• /
• 2000

Today deep drawing and ironing are the major process in manufacturing of battery case used in cellular phone from aluminum. The same technology is utilized in manufacturing of steel or aluminum cans for components of medical instrument, portable PC, walkman and so on. Most of these processes require multi-stage ironing following the deep drawing and redrawing processes. The practical aspects of this technology are well known and gained through extensive experiment and production know-how. However, the fundamental aspects of theses processes are relatively less known. Thus, it is expected that process simulations using FEM techniques would provide additional detailed information that could be utilized to improve the process condition. This paper illustrates the application of process modeling to deep drawing and redrawing operations for High Precision Rectangular Battery Case. A commercially avaliable finite element code LS-DYNA3D was used to simulate deep drawing and redrawing operations.

• 소성∙가공
• /
• 제10권6호
• /
• pp.471-477
• /
• 2001

Milli-structure components are classified as a component group whose size is between macro and micro scales, that is, about smaller than 20mm and larger than 1mm. The forming of these components has a typical phenomenon of bulk deformation with thin sheets because of the forming size. In this study, milli-structure rectangular cup drawing is analyzed and measured using the finite element method and experiments. Special containers or cases of cellular phone vibrator to save installation space are produced by rectangular-shaped drawing. A systematic approach is established for the design and the experiment of the forming processes for rectangular milli-structure cases. To verify the simulation results, the experimental investigations were also carried out on a real industrial product. The numerical analysis by FEM shows good agreement with the experimental results in view of the deformation shape of the product.

• ETRI Journal
• /
• 제29권6호
• /
• pp.725-735
• /
• 2007

This paper describes a line element planar antenna with three frequency bands. To obtain broadband characteristics, a modified planar antenna that has semi-elliptical elements based on the characteristics of a line element planar antenna is proposed and analyzed by the finite difference time domain method. Return loss characteristics are discussed as functions of the eccentricity values of semi-ellipse at each element. The broadbanding of the modified planar antenna is implemented based on the results. The planar antenna with three systems (an 800 MHz band cellular phone, a third-generation cellular phone, and a 2.4 GHz band wireless LAN system) is considered as an application example.

• 전자공학회논문지D
• /
• 제35D권4호
• /
• pp.32-39
• /
• 1998

Remez exchange algorithm was applied to realize an IF SAW filter for CDMA cellular phone systems. A SAW filter with withdrawal weighted transducers was simulated and then fabricated on 42.75.deg. ST-cut Quaritz wafer. Excellent agreement wasobtained between calculated andmeasured responses. Fabricated SAWfilterswere mounted on ceramic SMD package for reducing their size and volume. SAW filters were measured under matched circuit. As a result, 5 dB bandwidth of 1.32 MHz, 33dB bandwidth of 1.76 MHz, insertion loss of 13.8 dB and peak to peak ripple at passband of 0.26 dB were obtained. Linear group delay responses at passband were also obtained. These characteristics were good for practical use of IF SAW filter for CDMA system.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 춘계학술대회논문집
• /
• pp.356-361
• /
• 2001

A research to maximize the force transmitted from a vibration motor at the vibration mode, installed in the cellular phone jig, is presented in this study. When the natural frequencies corresponding to the structural vibration modes of the set exist within the range of the driving frequencies acquired by changing the RPM of the vibration motor, the structural vibration resonance is applicable to maximization of the vibration force sensible to the human body such as hands, arms, and hips. The analytical modal analysis using the Finite Elements and the experimental modal testing for the set jig were performed in order to understand the structural modes and the corresponding frequencies. Then the dynamic responses of the set jig to the given driving frequency were measured and the results on maximizing the vibration were confirmed by the FEM dynamic simulation.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 추계종합학술대회 논문집
• /
• pp.155-158
• /
• 1999

This paper describe the design and measurements of dual PLL for IMT-2000 cellular phone. As a result, dual PLL was well-operated in the RF frequency ranges of 2300 ~ 2360 MHz and If frequency of 380 MHz. The output power of -4.28 ㏈m, phase noise of -107.66㏈c/Hz at 100KHz frequency offset, lock time of 675.6$mutextrm{s}$ were obtained at 2330MHz. The output power of -4.78 ㏈m, phase noise of -115.28㏈c/Hz were also obtained at 380MHz.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집A
• /
• pp.471-476
• /
• 2001

Milli-structure components ate classified as a component group whose size is between macro and micro scales, that is, about less than 20mm and larger than 1mm. The forming of these components has a typical phenomenon of bulk deformation with thin sheets because of the forming size. In this study, milli-structure rectangular cup drawing is analyzed and measured using the finite element method and experiment. Generally, milli-structure containers or cases like cellular phone vibrator consist of rectangular-shaped drawing to save installation space. A systematic approach is established for the design and the experiment of the forming processes for rectangular milli-structure cases. To verify the simulation results, the experimental investigations were also carried out on a real industrial product. The numerical analysis by FEM shows good agreement with the experimental results in view of the deformation shape of the product.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2006년도 춘계학술발표논문집
• /
• pp.265-270
• /
• 2006

최근의 휴대전화 단말기(Cellular Phone, CP)는 IT기술을 적극적으로 접목하여 다양한 기능을 부가하고 있으나, 단순한 IT기술의 접목만으로는 CP기술 발전의 한계를 드러내고 있다. 이러한 상황에서 휴대전화 단말기에 개인용 로봇(Personal Robot)을 결합하여 로봇의 개인 서비스 기능과 엔터테인먼트 기능을 갖춘 개인로봇형 휴대전화단말기인 RCP(Robotic Cellular Phone)의 개념을 도입한 연구가 진행되고 있다. 본 논문에서는 RCP세부기술 중 하나인 $RCP^{Interaction}$에 주목한 연구로, RCP의 촉각 및 청각자극환경에서 인간이 느끼는 감성을 생체신호를 활용하여 객관적으로 감성을 평가할 수 있는 시스템에 대한 연구를 수행 하였다.

• 인터넷정보학회논문지
• /
• 제4권1호
• /
• pp.9-17
• /
• 2003

급속히 보급되고 있는 휴대폰의 영향으로 모바일 광고가 새로운 형태의 광고로 자리매김 할 수 있을 것으로 예상된다. 본 논문에서는 각 이동통신사에서 채택한 프로토콜이나 사용언어, 이미지, 휴대폰 LCD 사이즈에 맞는 광고 컨텐츠를 한번의 작업으로 해결할 수 있는 모바일 광고 시스템을 소개한다. 또한 무선 네트워크로 서버와 연결이 가능한 VM 애플리케이션에서의 광고를 제안한다.