• Proceedings of the KIEE Conference
• /
• 2005.10b
• /
• pp.38-40
• /
• 2005

Microdrive with high precision and light mass enough to install on mouse head was fabricated for recording the reliable signal of neuron cell to understand the brain study. The proposed microdrive has three H-form PZT actuators and its guide structure. The microdrive operation principle is based on the well known inchworm principle. The synchronization of three PZT actuators is able to produce the linear motion along the guide structure. Our proposed microdrive has a precise accuracy of about 100nm and a long stroke of about 5mm. The electrode which is used for the recording of the action potential of the neuron cell was fixed at one of PZT actuators. The proposed microdrive was suited to acquisition of signals from in vivo extra-cellular single-unit recoding. On the condition of the anesthetized mouse, the single-unit signals could be recorded by using the proposed microdrive. In addition, applying the PZT microdrive to an alert mouse, we try to implant it on a mouse brain skull to explore single neuron firing.

• Archives of Plastic Surgery
• /
• v.41 no.5
• /
• pp.584-587
• /
• 2014

In the present study, a fibular osteotomy guide based on a computer simulation was applied to a patient who had undergone mandibular segmental ostectomy due to oncological complications. This patient was a 68-year-old woman who presented to our department with a biopsy-proven squamous cell carcinoma on her left gingival area. This lesion had destroyed the cortical bony structure, and the patient showed attenuation of her soft tissue along the inferior alveolar nerve, indicating perineural spread of the tumor. Prior to surgery, a three-dimensional computed tomography scan of the facial and fibular bones was performed. We then created a virtual computer simulation of the mandibular segmental defect through which we segmented the fibular to reconstruct the proper angulation in the original mandible. Approximately 2-cm segments were created on the basis of this simulation and applied to the virtually simulated mandibular segmental defect. Thus, we obtained a virtual model of the ideal mandibular reconstruction for this patient with a fibular free flap. We could then use this computer simulation for the subsequent surgery and minimize the bony gaps between the multiple fibular bony segments.

• The Journal of Korean Academy of Prosthodontics
• /
• v.46 no.3
• /
• pp.227-237
• /
• 2008

STATEMENT OF PROBLEM: Zirconium oxide can be a substitute to titanium as implant materials to solve the esthetic problems of dark color in the gingival portion of implant restorations. PURPOSE: This study was performed to define attachment and growth behavior of osteoblast- like cells cultured on grooved surfaces of zirconium oxide and evaluate the genetic effect of zirconium oxide surfaces using the reverse transcriptase-polymerase chain reaction (RT-PCR). MATERIAL AND METHODS: MC3T3-E1 cells were cultured on (1) commercially pure titanium discs with smooth surface (T group), (2) yttrium-stabilized tetragonal zirconia polycrystal (Y-TZP) with machined surface (ZS group), and (3) Y-TZP with $100{\mu}m$ grooves (ZG group). Cell proliferation activity was evaluated through MTT assay and cell morphology was examined by SEM. The mRNA expression of Runx2, alkaline phosphatase, osteocalcin, TGF-${\beta}1$, IGF-1, G3PDH in E1 cells were evaluated by RT-PCR. RESULTS: From the MTT assay, after 48 hours of adhesion of MC3T3-E1 cells, the mean optical density value of T group and ZG group significantly increased compared to the ZS group. SEM images of osteoblast-like cells showed that significantly more cells were observed to attach to the grooves and appeared to follow the direction of the grooves. After 24 hours of cell adhesion, more spreading and flattening of cells with active filopodia formation occurred. Results of RT-PCR suggest that T group, ZS group, and ZG group showed comparable osteoblast-specific gene expression after 24 hours of cell incubation. CONCLUSION: Surface topography and material of implants can play an important role in expression of osteoblast phenotype markers. Zirconia ceramic showed comparable biological responses of osteoblast-like cells with titanium during a short-time cell culture period. Also, grooves influence cell spreading and guide the cells to be aligned within surface grooves.

• Development and Reproduction
• /
• v.24 no.3
• /
• pp.207-214
• /
• 2020

Primary cell culture is a sufficient method frequently used to study the cellular properties and mechanisms of isolated cells in a controlled environment. In this study, an embryonic cell line (FGBC8) derived from the blastula stages of embryos of olive flounder Paralichthys olivaceus was developed. Furthermore, conditions for optimal long-term maintenance of this primary embryonic cell culture were investigated. Morphologically, FGBC8 cells were composed primarily of epithelial-like cells. FGBC8 cells were subcultured for >160 passages over ~830 days. The doubling time of FGBC8 cells was 73.8 h, and the modal diploid chromosome number was 48. FGBC8 cells transfected with green fluorescence protein (GFP)-expression plasmid exhibited a strong signal 48 h after transfection. Consequently, we demonstrated that fish serum is a crucial supplement for the long-term survival and maintenance of comparable morphology in these primary embryonic cells. Our results can be used as a guide for primary embryonic cell cultures for other fish species and may be useful for cell biotechnological applications.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.9
• /
• pp.3677-3683
• /
• 2015

Abnormally expressed microRNAs (miRNAs) and genes have been found to play key roles in esophageal squamous cell carcinoma (ESCC), but little is known about the underlying mechanisms. The aim of this paper was to assess inter-relationships and the regulatory mechanisms of ESCC through a network-based approach. We built three regulatory networks: an abnormally expressed network, a related network and a global network. Unlike previous examples, containing information only on genes or miRNAs, the prime focus was on relationships. It is worth noting that abnormally expressed network emerged as a fault map of ESCC. Theoretically, ESCC might be treated and prevented by correcting the included errors. In addition, the predicted transcription factors (TFs) obtained by the P-match method also warrant further study. Our results may further guide gene therapy researchers in the study of ESCC.

• Radiation Oncology Journal
• /
• v.35 no.1
• /
• pp.16-24
• /
• 2017

Locally advanced non-small cell lung cancer (LA-NSCLC) is composed of heterogeneous subgroups that require a multidisciplinary team approach in order to ensure optimal therapy for each patient. Since 2010, the National Comprehensive Cancer Network has recommended chemoradiation therapy (CRT) for bulky mediastinal disease and surgical combination for those patients with single-station N2 involvement who respond to neoadjuvant therapy. According to lung cancer tumor boards, thoracic surgeons make a decision on the resectability of the tumor, if it is determined to be unresectable, concurrent CRT (CCRT) is considered the next choice. However, the survival benefit of CCRT over sequential CRT or radiotherapy alone carries the risk of additional toxicity. Considering severe adverse events that may lead to death, fit patients who are able to tolerate CCRT must be identified by multidisciplinary tumor board. Decelerated approaches, such as sequential CRT or high-dose radiation alone may be a valuable alternative for patients who are not eligible for CCRT. As a new treatment strategy, investigators are interested in the application of the innovative radiation techniques, trimodality therapy combining surgery after high-dose definitive CCRT, and the combination of radiation with targeted or immunotherapy agents. The updated results and on-going studies are thoroughly reviewed in this article.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.10 no.1
• /
• pp.16-26
• /
• 2011

Variable speed limit(VSL) is one of the highway ITS techniques designed to prevent accidents and traffic slow down by reducing congestion or speed variation between vehicles and lanes prior to arrive at the accident location by limiting speed. In Korea, while people have recognized the need for variable speed limit beginning with Seoul's urban expressway and installed facilities in order to provide guide for speed limit per lane and lane use, there has not been enough development of algorithm for internal administration as well as research on the basic principles behind administering variable speed limit. This study is for modeling and evaluating the VSL strategies based on the traffic flow theory. Supply-Demand method of the Cell Transmission Model is applied to demonstrate the traffic features and shockwaves to upstream of the bottleneck with/without VSL. We verified the explanation of Cell Transmission Model for the numerical example. and as the result, it is found that VSL strategies can reduce the total travel time in the congested section and variation of the speed. It means VSL is useful to improve the traffic condition and the safety on highway

• BMB Reports
• /
• v.53 no.11
• /
• pp.576-581
• /
• 2020

Dimethylation of the histone H3 protein at lysine residue 9 (H3K9) is mediated by euchromatin histone methyltransferase II (EHMT2) and results in transcriptional repression of target genes. Recently, chemical inhibition of EHMT2 was shown to induce various physiological outcomes, including endoplasmic reticulum stress-associated genes transcription in cancer cells. To identify genes that are transcriptionally repressed by EHMT2 during apoptosis, and cell stress responses, we screened genes that are upregulated by BIX-01294, a chemical inhibitor of EHMT2. RNA sequencing analyses revealed 77 genes that were upregulated by BIX-01294 in all four hepatic cell carcinoma (HCC) cell lines. These included genes that have been implicated in apoptosis, the unfolded protein response (UPR), and others. Among these genes, the one encoding the stress-response protein Ras-related GTPase C (RRAGC) was upregulated in all BIX-01294-treated HCC cell lines. We confirmed the regulatory roles of EHMT2 in RRAGC expression in HCC cell lines using proteomic analyses, chromatin immune precipitation (ChIP) assay, and small guide RNA-mediated loss-of-function experiments. Upregulation of RRAGC was limited by the reactive oxygen species (ROS) scavenger N-acetyl cysteine (NAC), suggesting that ROS are involved in EHMT2-mediated transcriptional regulation of stress-response genes in HCC cells. Finally, combined treatment of cells with BIX-01294 and 5-Aza-cytidine induced greater upregulation of RRAGC protein expression. These findings suggest that EHMT2 suppresses expression of the RRAGC gene in a ROS-dependent manner and imply that EHMT2 is a key regulator of stress-responsive gene expression in liver cancer cells.

• Applied Chemistry for Engineering
• /
• v.29 no.5
• /
• pp.626-629
• /
• 2018

Fuel cell is one of the promising electrochemical technologies enabling power production with various fuel sources such as hydrogen, hydrocarbon and even solid carbon. However, its long-term performance is often unstable and unpredictable. In this work, we observed that gasification-driven hydrocarbons were the culprit of unpredictability. Therefore, we controlled the presence of hydrocarbons with the help of external gas supply, i.e. argon and carbon dioxide, and suggested the optimal amount of carbon dioxide required for predictable fuel cell operations. Our optimization strategy was based upon the following observations; carbon dioxide can work as both an inert gas and a fuel precursor, depending on its amount present in the reactor. When deficient, the carbon dioxide cannot fully promote the reverse Boudouard reaction that produces carbon monoxide fuel. When overly present, the carbon dioxide works as an inert gas that causes fuel loss. In addition, the excessive carbon monoxide may result in coking on the catalyst surface, leading to the decrease in the power performance.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2008.10a
• /
• pp.422-425
• /
• 2008

Recently, electronic products and related parts are required to have thin thickness because of small form factor. To go with the trend, LGP(light guide plate) of LCD BLU(Liquid Crystal Display Back light unit: It is one of kernel parts of LCD) for cell phone has the thickness of 0.3 mm and the battery case of cell phone has 0.25 mm. Accordingly, high speed injection molding is required to make products which have thin thickness. High speed injection molding means that the resin is injected into the cavity at higher than normal speed avoiding short shot. In the case of hydro-mechanical high speed injection machine, it requires the design for hydraulic unit to make high injection speed and the design for control unit to control hydraulic unit. In the present paper, we concentrated on the molding stability of hydro-mechanical high speed injection machine to make an LGP of 0.3 mm thickness.