• Title/Summary/Keyword: Cell-by-Cell Location Area

Search Result 72, Processing Time 0.027 seconds

Propagation Path Analysis for Planning a Cell in the CDMA Mobile Communication

  • Park, Jung-Jin;Kim, Seon-Mi;Choi, Dong-You;Ryu, Kwang-Jin;Choi, Dong-Woo;Noh, Sun-Kuk;Park, Chang-Kyun
    • Proceedings of the IEEK Conference
    • /
    • 2002.07b
    • /
    • pp.1078-1081
    • /
    • 2002
  • In microcell or picocell mobile communication using cellular method, we suggested propagation prediction model which can accurately and rapidly interpret mobile communication propagation environment in urban, when subscriber service is done based on the main road in urban. Further, we simulated suggested propagation prediction model under the hypothesis of urban propagation environment of PCS mobile communication, analyzed receiving field strength by area within a cell, and finally suggested the optimal transmitting power and location condition of microcell or picocell mobile communication base station

  • PDF

A New Resource Allocation Technique to Mitigate Co-Channel Interference in Cellular OFDMA Systems (OFDMA 시스템에서 셀 외곽지역의 동일 채널간섭 최소화를 위한 자원할당 기법)

  • Kim Dai-Kwan;Kim Jong-Kyung;Seo Jong-Soo
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.31 no.6A
    • /
    • pp.603-610
    • /
    • 2006
  • This paper considers the problem of mitigating CCI(Co-channel Interference) in cellular OFDMA downlink systems. The users in the cell-edge area suffer from large CCIs, and their SINR requirements are hard to be maintained. To guarantee their QoS, we propose a new exclusive sub-carrier allocation and power control algorithm. The performance of the proposed two-step algorithm is simulated in SUI-A path-loss model, and it is compared with that of the conventional algorithm. The simulation results show that the data transmission rate in the cell-edge area was increased by 600Kbps within the same power constraint. The results indicate that with proposed algorithm, the data rate stability can be achieved independently of the user location in the cell.

An Adaptive Hot-Spot Operating Scheme for OFDMA Downlink Systems in Vertically Overlaid Cellular Architecture

  • Kim, Nak-Myeong;Choi, Hye-Sun;Chung, Hee-Jeong
    • ETRI Journal
    • /
    • v.28 no.3
    • /
    • pp.282-290
    • /
    • 2006
  • In vertically overlaid cellular systems, a temporary traffic concentration can occur in a hot-spot area, and this adversely affects overall system capacity. In this paper, we develop an adaptive hot-spot operating scheme (AHOS) to mitigate the negative effects from the nonuniform distribution of user location and the variation in the mixture of QoS requirements in orthogonal frequency division multiple access downlink systems. Here, the base station in a macrocell can control the operation of picocells within the cell, and turns them on or off according to the system overload estimation function. In order to determine whether the set of picocells is turned on or off, we define an AHOS gain index that describes the number of subcarriers saved to the macrocell by turning a specific picocell on. For initiating the picocell OFF procedure, we utilize the changes in traffic concentration and co-channel interference to the neighboring cells. According to computer simulation, the AHOS has been proved to have maximize system throughput while maintaining a very low QoS outage probability under various system scenarios in both a single-cell and multi-cell environments.

  • PDF

Adaptive Transition of Aquaporin 5 Expression and Localization during Preimplantation Embryo Development by In Vitro Culture

  • Park, Jae-Won;Shin, Yun Kyung;Choen, Yong-Pil
    • Development and Reproduction
    • /
    • v.18 no.3
    • /
    • pp.153-160
    • /
    • 2014
  • Adaptive development of early stage embryo is well established and recently it is explored that the mammalian embryos also have adaptive ability to the stressful environment. However, the mechanisms are largely unknown. In this study, to evaluate the possible role of aquaporin in early embryo developmental adaptation, the expression of aquaporin (AQP) 5 gene which is detected during early development were examined by the environmental condition. To compare expression patterns between in vivo and in vitro, we conducted quantitative RT-PCR and analyzed localization of the AQP5 by whole mount immunofluorescence. At in vivo condition, Aqp5 expressed in oocyte and in all the stages of preimplantation embryo. It showed peak at 2-cell stage and decreased continuously until morula stage. At in vitro condition, Aqp5 expression pattern was similar with in vivo embryos. It expressed both at embryonic genome activation phase and second mid-preimplantation gene activation phase, but the fold changes were modified between in vivo embryos and in vitro embryos. During in vivo development, AQP5 was mainly localized in apical membrane of blastomeres of 4-cell and 8-cell stage embryos, and then it was localized in cytoplasm. However, the main localization area of AQP5 was dramatically shifted after 8-cell stage from cytoplasm to nucleus by in vitro development. Those results explore the modification of Aqp5 expression levels and location of its final products by in vitro culture. It suggests that expression of Aqp5 and the roles of AQP5 in homeostasis can be modulated by in vitro culture, and that early stage embryos can develop successfully by themselves adapting to their condition through modulation of the specific gene expression and localization.

Grid-based Cloaking Area Creation Scheme supporting Continuous Location-Based Services (연속적인 위치기반 서비스를 지원하는 그리드 기반 Cloaking 영역 설정 기법)

  • Lee, Ah-Reum;Kim, Hyeong-Il;Chang, Jae-Woo
    • Journal of Korea Spatial Information System Society
    • /
    • v.11 no.3
    • /
    • pp.19-30
    • /
    • 2009
  • Recent development in wireless communication technology and mobile equipment like PDA, cellular phone and GPS makes location-based services (LBSs) popular. However, because, in the LBSs, users continuously request a query to LBS servers by using their exact locations, privacy information could be in danger. Therefore, a mechanism for users' privacy protection is required for the safe and comfortable use of LBSs by mobile users. For this, this paper propose a grid-based cloaking area creation scheme supporting continuous LBSs. The proposed scheme creates a cloaking area rapidly by using grid-based cell expansion to efficiently support the continuous LBSs. In addition, to generate a cloaking area which makes the exposure probability of a mobile user to a minimum, we compute a privacy protection degree by granting weights to mobile users. Finally, we show from a performance analysis that our cloaking scheme outperforms the existing cloaking schemes, in terms of service time, privacy protection degree.

  • PDF

Laser Stream Patterning Improvement for Gravure Printing (그라비아 인쇄를 위한 Laser Stream Patterning 개선)

  • Ahn T. Y.;Kim H. G.;Lee D. H.
    • Proceedings of the Korean Society for Technology of Plasticity Conference
    • /
    • 2001.10a
    • /
    • pp.186-189
    • /
    • 2001
  • The main method in micro-etching process, used in manufacturing semiconductors, electronic components, circuits, is Photo Masking method that exposes and develops on the photo-sensitivity solutions or films. This method enables one to process highly precisely, $\pm$0.03 mm in end line location area. But this has limits in a high speed / wide width process, difficulties in endless masking, and the problem of high price. We have developed the direct masking method to make use of Gravure printing, widely used in grocery packing sheet printing. We made cylinder tools to influence the masking quality by laser stream process. We have confirmed that the end line location accuracy in the line width of the product is improved from 0.12 mm to $\pm$0.07 mm level, after etching process.

  • PDF

The Individual Discrimination Location Tracking Technology for Multimodal Interaction at the Exhibition (전시 공간에서 다중 인터랙션을 위한 개인식별 위치 측위 기술 연구)

  • Jung, Hyun-Chul;Kim, Nam-Jin;Choi, Lee-Kwon
    • Journal of Intelligence and Information Systems
    • /
    • v.18 no.2
    • /
    • pp.19-28
    • /
    • 2012
  • After the internet era, we are moving to the ubiquitous society. Nowadays the people are interested in the multimodal interaction technology, which enables audience to naturally interact with the computing environment at the exhibitions such as gallery, museum, and park. Also, there are other attempts to provide additional service based on the location information of the audience, or to improve and deploy interaction between subjects and audience by analyzing the using pattern of the people. In order to provide multimodal interaction service to the audience at the exhibition, it is important to distinguish the individuals and trace their location and route. For the location tracking on the outside, GPS is widely used nowadays. GPS is able to get the real time location of the subjects moving fast, so this is one of the important technologies in the field requiring location tracking service. However, as GPS uses the location tracking method using satellites, the service cannot be used on the inside, because it cannot catch the satellite signal. For this reason, the studies about inside location tracking are going on using very short range communication service such as ZigBee, UWB, RFID, as well as using mobile communication network and wireless lan service. However these technologies have shortcomings in that the audience needs to use additional sensor device and it becomes difficult and expensive as the density of the target area gets higher. In addition, the usual exhibition environment has many obstacles for the network, which makes the performance of the system to fall. Above all these things, the biggest problem is that the interaction method using the devices based on the old technologies cannot provide natural service to the users. Plus the system uses sensor recognition method, so multiple users should equip the devices. Therefore, there is the limitation in the number of the users that can use the system simultaneously. In order to make up for these shortcomings, in this study we suggest a technology that gets the exact location information of the users through the location mapping technology using Wi-Fi and 3d camera of the smartphones. We applied the signal amplitude of access point using wireless lan, to develop inside location tracking system with lower price. AP is cheaper than other devices used in other tracking techniques, and by installing the software to the user's mobile device it can be directly used as the tracking system device. We used the Microsoft Kinect sensor for the 3D Camera. Kinect is equippedwith the function discriminating the depth and human information inside the shooting area. Therefore it is appropriate to extract user's body, vector, and acceleration information with low price. We confirm the location of the audience using the cell ID obtained from the Wi-Fi signal. By using smartphones as the basic device for the location service, we solve the problems of additional tagging device and provide environment that multiple users can get the interaction service simultaneously. 3d cameras located at each cell areas get the exact location and status information of the users. The 3d cameras are connected to the Camera Client, calculate the mapping information aligned to each cells, get the exact information of the users, and get the status and pattern information of the audience. The location mapping technique of Camera Client decreases the error rate that occurs on the inside location service, increases accuracy of individual discrimination in the area through the individual discrimination based on body information, and establishes the foundation of the multimodal interaction technology at the exhibition. Calculated data and information enables the users to get the appropriate interaction service through the main server.

Fabrication Process of Aluminum Bipolar Plate for Fuel Cell using Vacuum Die Casting (진공 다이캐스팅 공법을 이용한 연료전지용 알루미늄 분리판의 제조 공정)

  • Jin, Chul-Kyu;Kang, Chung-Gil
    • Journal of Korea Foundry Society
    • /
    • v.31 no.2
    • /
    • pp.71-78
    • /
    • 2011
  • This study aims to investigate the formability of bipolar plates for fuel cell fabricated by vacuum die casting of ALDC 6. Cavity shape of mold is thin walled plate (size: $200mm{\times}200mm{\times}0.8mm$) with a serpentine channel (active area: $50mm{\times}50mm$). Before bipolar plate was made by HPDC, computational filling behavior and solidification was performed by MAGMA soft. The final mold design for location and direction of channel was determined by computational simulation. Also, according to injection speed conditions, simulation result was compared to actual die casting experimental result. When vacuum pressure, injection speed of low and high region is 350 mbar, 0.3 m/s and 2.5 m/s respectively, products had few casting defects. On the other hand, at the same as injection speed, without vacuum pressure, products had many casting defects between end of the channel and overflow.

Hiker Mobility Model and Mountain Distress Simulator for Location Estimation of Mountain Distress Victim (산악 조난자의 위치추정을 위한 이동성 모델 및 조난 시뮬레이터)

  • Kim, Hansol;Cho, Yongkyu;Jo, Changhyuk
    • Journal of the Korea Society for Simulation
    • /
    • v.31 no.3
    • /
    • pp.55-61
    • /
    • 2022
  • Currently police and fire departments use a Network/Wifi/GPS based emergency location positioning system established by mobile carriers to directly link with the device of the people who request the rescue to accurately position the expected location in the call area. However in the case of mountain rescue it is difficult to rescue the victim in golden time because the location of the search area cannot be limited when the victim is located in a radio shadow area of the mountain or the device power is off and this situation become worse if victim fail to report 911 by himself due to the injury. In this paper, we are expected to solve the previous problem by propose the mobile telecommunication forensic simulator consist of time series of cell information, human mobility model which include some general and specific features (age, gender, behavioral characteristics of victim, etc.) and intelligent infer system. The results of analysis appear in heatmap of polygons on the map based on the probability of the expected location information of the victim. With this technology we are expected to contribute to rapid and accurate lifesaving by reducing the search area of rescue team.

A hybrid approach of generative design methods for designing tall-buildings form

  • Tofighi Pouria;Ekhlassi, Ahmad;Rahbar, Morteza
    • Advances in Computational Design
    • /
    • v.7 no.2
    • /
    • pp.153-171
    • /
    • 2022
  • The present study aimed to find a way to create forms that can simultaneously meet several architectural requirements by applying generative design methods specifically focused on cellular automata. In other words, it is tried to find various forms of architecture that all have common features. Because of the useful features of cellular automata, we decided to use it to generate various forms, but make a relation between the discrete nature of cellular automata and the continuous nature of architecture, was the major problem of our project. To achieve this goal, three consecutive stages were designed. In the first stage, independent variables including the location of the building, the height of the building, and the building area were considered as the inputs of the model. In the second stage, after locating the building, the building's main shell was designed as a hidden geometry for the cellular automata and then the cellular automata were determined based on this shell. The main result of this research is establishing a logical relationship between the discrete geometry of the cellular automata and the continuous search space such that it creates various optimized forms. Although we specify the site plan of this project at Iran-Tehran, this research can be generalized to various design sites as well as different projects, allowing the architectsto alter the cell dimensions, cell density, etc., based on their opinion and project needs.