• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.2
• /
• pp.528-544
• /
• 2015

Base Station Cooperation (BSC) has been a promising technique for combating the Inter-Cell Interference (ICI) by exchanging information through a high-speed optical fiber back-haul to increase the diversity gain. In this paper, we propose a novel pilot symbol assisted data fusion scheme for distributed Uplink BSC (UBSC) based on Differential Evolution (DE) algorithm. Furthermore, the proposed scheme exploits the pre-defined pilot symbols as the sample of transmitted symbols to constitute a sub-optimal Weight Calculation (WC) model. To circumvent the non-linear programming problem of the proposed sub-optimal model, DE algorithm is employed for searching the proper fusion weights. Compared with the existing equal weights based soft combining scheme, the proposed scheme can adaptively adjust the fusion weights according to the accuracy of cooperative information, which remains the relatively low computational complexity and back-haul traffic. Performance analysis and simulation results show that, the proposed scheme can significantly improve the system performance with the pilot settings of the existing standards.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.8
• /
• pp.16-21
• /
• 2009

OFDM is a key technology for 4G cellular systems in the future. But when OFDM is used in cellular system environment, it has severe inter-cell interference problems. In this paper, we propose an ICIC scheme that can reduce inter-cell interference for OFDM-based 4G cellular systems. and we analyze the efficiency of the proposed scheme. Simulation is carried out according to the simplified 3GPP LTE system level simulation parameters. We have confirmed the improvement of Geometry efficiency about 4dB at the results.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.12A
• /
• pp.962-970
• /
• 2009

This paper proposes a self-organizing scheme which collects the information of neighboring cells, and then assigns a Physical Cell Identifier (PCI) for a newly deployed cell in LTE systems. The number of PCIs are limited, so the reuse of PCIs in different cells is unavoidable. In a dense urban environment where many small cells such as Pico/Femto cells are deployed under macro cells, it is expected that the number of PCIs becomes more limited. Therefore, the limited number of PCIs needs to be allocated very efficiently. We propose a PCI allocation scheme for a newly deployed cell that can autonomously select a PCI to increase PCI reuse efficiency by utilizing the levels of received signal strength from neighboring cells. To evaluate the performance of the proposed scheme, simulations have been developed and performed with two scenarios on the coverage types of newly deployed cells. When the proposed scheme is applied, the simulation results show that the number of PCIs required for the operation of the system can be saved so that PCIs can be efficiently reused.

• Proceedings of the Korean Information Science Society Conference
• /
• 2006.06d
• /
• pp.217-219
• /
• 2006

4G mobile networks are expected to support various multimedia services over IP networks and also satisfy high spectral efficiency requirement. In cellular systems including 4G networks, hotspot cells can occur when available wireless resources at some location are not enough to sustain the needs of users. The hotspot cell can potentially lead to blocked and dropped calls, which can deteriorate the service quality for users. In a 4G mobile network, a band of users enjoying multimedia services can move around, which may generate heavy flows of traffic load. This situation can generate the hotspot cell which has a short life span of only a few minutes. In this paper, we propose a handover-based scheme which can effectively manage hotspot cells in 4G mobile networks. With the scheme, the current serving cell can recognize the load status of the target cell in advance before handover execution. Adaptive handover time control according to the amount of traffic load of cells can effectively and flexibly manage the hotspot cell in the network. And, through our hotspot cell management scheme, acceptable service quality can be supported as users continuously maintain connections with the network. In the simulation results, we find that our scheme generates smaller number of hotspot cells and supports higher service quality than the compared schemes.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.24 no.12
• /
• pp.1570-1579
• /
• 2000

Finite element analysis of fluid flow with moving free surface has been carried out in two and tree dimensions. The new VOF-based numerical algorithm that has been proposed by the present authors was applied to several 2-D and 3-D free surface flow problems. The proposed free surface tracking scheme is based on two numerical tools that have been newly introduced by the present authots; the orientation vector to represent the free surface orientation in each cell and the baby-cell to determine the fluid volume flux at each cell boundary. The proposed numerical algorithm has been applied to 2-D and 3-D cavity filling and sloshing problems, which demonstrated versatility and effectiveness of the new free surface tracking scheme as well as the overall solution procedure. The proposed numerical algorithm resolved successfully the interacting free surface with each other. The simulated results demonstrated the applicability of proposed numerical algorithm to the practical problems of large free surface motion. Also, it has been demonstrated that the proposed free surface tracking scheme can be easily implemented in any irregular non-uniform grid systems and can be extended to the 3-D free surface flow problem without additional efforts.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.8 no.1
• /
• pp.98-103
• /
• 2008

1T1C DRAM has been facing technological and physical constraints that make more difficult their further scaling. Thus there are much industrial interests for alternative technologies that exploit new devices and concepts to go beyond the 1T1C DRAM technology, to allow better scaling, and to enlarge the memory performance. The technologies of DRAM cell are changing from 1T1C cell type to capacitor-less 1T-gain cell type for more scalable cell size. But floating body cell (FBC) of 1T-gain DRAM has weak retention properties than 1T1C DRAM. FET-type 1T-FeRAM is not adequate for long term nonvolatile applications, but could be a good alternative for the short term retention applications of DRAM. The proposed nonvolatile refresh scheme is based on utilizing the short nonvolatile retention properties of 1T-FeRAM in both after power-off and power-on operation condition.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1174-1175
• /
• 2008

A operation scheme to regulate the active power output of the hybrid system consisted of a doubly fed induction generator(DFIG) and a fuel-cell are presented. The power output of the wind turbine fluctuates as the wind speed varies and the slip power between the rotor circuit and power converter varies as the rotor speed change. A fuel cell system can be individually operated and adjusted output power. In this paper, a fuel-cell is performed to regulate the active output power in comparison with the active power output of a DFIG. Based on PSCAD/EMTDC power system tools, we simulated a DFIG and a fuel cell and investigated about dynamics of the output power in hybrid system.

• Journal of Internet Computing and Services
• /
• v.18 no.6
• /
• pp.7-13
• /
• 2017

In this paper, we propose a novel dynamic subchannel grouping (DSG) algorithm to maximize the system capacity considering intended proper outage probability for the downlink of enterprise small-cell networks (ESNs). In the proposed DSG scheme, a local gateway (LGW) which is installed in a building dynamically divides the frequency bandwidth into different numbers of subchannel groups (SGs) based on the numbers of small-cell access points (SAPs) and small-cell user equipments (SUEs) per floor. Then, the LGW assigns the SGs to SAPs and the SAPs allocate them to their serving SUEs. Through simulation results, we show that the proposed DSG scheme is appropriate for the ESNs compared to the conventional small-cell networks in which all SAPs use the number of fixed SGs in terms of the system capacity and outage probability.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.11
• /
• pp.44-52
• /
• 1998

In this paper, we proposed a node architecture and cell routing strategies for ATM applications in WDM multihop networks. The proposed node architecture employs the optical delay loop for storing the cell which is failed in out-link contention. This optical delay loop allows the delay of one cell without the electro-optic conversion. Therefore, we can get the advantages of S&F(Store-and-Forward) routing in Deflection-based all-optical networks. To support the ATM applications efficiently. we considered the transmission priority of ATM cell so that high priority cell can be transmitted with lower loss and shorter delay than low priority one. Two kinds of routing strategies are designed for this architecture: Scheme-Ⅰand Scheme-Ⅱ. Scheme-Ⅰapplies S&F routing to high cell and Deflection routing to low cell, i.e., high cells are routed along the shortest path based on S&F routing, but low cells are deflected or lost. Schem-Ⅱ is similar to Scheme-Ⅰexcept that low cells can occupy the optical loop if it is available. This Scheme-Ⅱ increases the utilization of network resources without decreasing the throughput of high cell by reducing the low cell loss rate when traffic load is low. Simulation results show that our routing strategies have better performance than conventional ones under non-uniform traffic as well as uniform traffic.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.1C
• /
• pp.22-27
• /
• 2011

This paper proposes an efficient user selection algorithm that provides a maximum 셀 용량 based Multi-user MIMO system based on zero-forcing criterion. The proposed scheme forms a primary group of users whose channel power exceeds a predetermined threshold. Through computer simulations, we have found that the proposed method outperforms the conventional scheme yielding a sum rate that is 0.33 bps/Hz higher when the total numbers of users and transmit antennas in the cell are 100 and 4, respectively.