• 한국지반공학회논문집
• /
• 제36권8호
• /
• pp.35-47
• /
• 2020

비탈면 보강 용도로 사용되는 영구앵커의 경우 사용기간 동안 지지력 및 내구성이 확보되어야 한다. 그러나 최근 국내·외 연구 결과에 따르면 앵커의 장기거동에 따라 긴장재 파단, 정착구 파손, 비탈면 변형 및 손상, 시간에 따른 잔존긴장력 감소 등의 현상들이 보고되고 있다. 이러한 문제는 앞으로 증가할 것으로 보이며, 이로 인한 유지보수 비용의 증가, 시설물 붕괴 사고 등의 문제가 불가피할 것으로 보인다. 이에 본 연구에서는 그라운드 앵커의 유지관리 절차 및 방법을 현실적으로 보완하기 위해 문헌연구를 수행하여 국내 유지관리 기법의 문제점 및 한계를 제시하였다. 이후 실제 현장 그라운드 앵커에 설치되어 있는 하중계 계측자료를 분석하여 앵커들의 경과일에 따른 잔존긴장력의 변화를 파악하였고, 최종 분석 결과를 통해 앵커의 시공조건, 구성암반 등이 긴장력의 증감에 미치는 영향을 파악하였다.

• Applied Microscopy
• /
• 제36권1호
• /
• pp.25-33
• /
• 2006

정상성인 여성의 머리카락에 미용실에서 일반적으로 시술하는 탈색제를 사용한 다음 탈색직후, 탈색 후 10일, 20일이 경과한 머리카락을 채취하여 머리카락의 손상정도를 고배율의 투과 및 주사전자현미경으로 관찰하였다. 탈색직후 머리카락의 표면은 정상 머리카락과 비슷한 상태로 관찰되었으며 비늘이 분리되거나 손상됨 없이 나타났다. 탈색 후 10일 경과된 머리카락은 비늘이 분리되어 있고 일부 큐티클세포의 세포질은 조각이 나 있거나 떨어져 나갔다. 이 시기에 머리카락은 비늘이 떨어져 나가면서 표면에 세포부스러기들이 그대로 부착되어 있고, 비늘의 모양은 끝 쪽이 날카로운 모양을 하고 있었다. 탈색 후 20일이 경과된 머리카락은 표면 전체가 비늘의 분리에 의해서 거칠게 나타났다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
• /
• pp.297.2-297.2
• /
• 2013

Scavenging electricity from wasteful energy resources is currently an important issue and piezoelectric nanogenerators (NGs) based on zinc oxide (ZnO) are promising energy harvesters that can be adapted to various portable, wearable, self-powered electronic devices. Although ZnO has several advantages for NGs, the piezoelectric semiconductor material ZnO generate an intrinsic piezoelectric potential of a few volts as a result of its mechanical deformation. As grown, ZnO is usually n-type, a property that was historically ascribed to native defects. Oxygen vacancies (Vo) that work as donors exist in ZnO thin film and usually screen some parts of the piezoelectric potential. Consequently, the ZnO NGs' piezoelectric power cannot reach to its theoretical value, and thus decreasing the effect from Vo is essential. In the present study, c-axis oriented insulator-like sputtered ZnO thin films were grown in various temperatures to fabricate an optimized nanogenerator (NGs). The purity and crystalinity of ZnO were investigated with photoluminescence (PL). Moreover, by introducing a p-type polymer usually used in organic solar cell, it was discussed how piezoelectric passivation effect works in ZnO thin films having different types of defects. Prepared ZnO thin films have both Zn vacancies (accepter like) and oxygen vacancies (donor like). It generates output voltage 20 time lager than n-type dominant semiconducting ZnO thin film without p-type polymer conjugating. The enhancement is due to the internal accepter like point defects, zinc vacancies (VZn). When the more VZn concentration increases, the more chances to prevent piezoelectric potential screening effects are occurred, consequently, the output voltage is enhanced. Moreover, by passivating remained effective oxygen vacancies by p-type polymers, we demonstrated further power enhancement.

• 원예과학기술지
• /
• 제28권3호
• /
• pp.370-373
• /
• 2010

'Merlot' 포도 품종의 수확전 ethyl oleate 처리는 외표피와 아표피의 두께를 감소시키며 착색을 현저히 향상시킨다. 무처리구의 과피 두께는 $126-189{\mu}m$인데 반하여 처리 과실의 과피두께는 $90-107{\mu}m$로 조사되었으며, 이러한 외표피와 아표피 층의 두께 감소는 처리 후 외표피와 아표피를 구성하는 세포의 빠른 노화에 의하여 세포가 죽거나 탈수가 나타나기 때문인 것으로 조사되었다. 처리 후에 빠르게 과피 표면의 왁스층이 녹은 듯한 형태를 보이며 이는 착색을 증진시키는 것으로 관찰되었으며, 전체적인 안토시아닌 함량 역시 증가하는 것으로 조사되었다. 반면에 각각의 안토시아닌 함량에 있어서는 메톡시기와 결합하거나 유기산과 결합한 안토시아닌이 증가한 반면 수산기와 결합한 안토시아닌은 감소하는 경향이었다.

• 자원환경지질
• /
• 제21권3호
• /
• pp.235-255
• /
• 1988

Talc deposit of pipe-like form occurrs in the lower part of the Hyangsanri Dolomite with a strike of N40 -50 E and a dip of 40 -50 NW which is one formation of the Ogcheon Super Croup. The pipi-like ore body plunge at about $40^{\circ}$ to the west and are parallel to the lineation developed in the area. Structural formulae of tales occurred in this deposit are close to the ieal composition $Mg_6Si_8O_{20}(OH)_4$ showing limited deviation from ideal one. Substitution of Al for Si in tetrahedral site is of little or nothing ranging 0-0.04 and octahedral occupancy is close to six ranging 5.88-5.98 atoms per unit cell. Predominant octahedaral cation is Mg and proportion of divalent cations is generally over 97percent. Calcite -dolomite thermometry is obtained by determining the mol % $MgCO_3$using of EPMA and XRD methods. The peak metamorphic temperature can be estimated at $470{\pm}30^{\circ}C$ in the area whereas carbonates occurred at near talc ore show lower temperature than $400^{\circ}C$ that the calcite solvus limit is not well established. It indicates that the talc deposit was formed at the lower temperature that the metamorphic temperature. Cosequently, the formation of talc by metamorphism is questionable and the alteratin zone developed around the talc ore is very limited. The occurrence of talc ore in the dolomite as well as mineralogy, calcite-dolomite geothermometry, chlorite geothermometry, field and microscopic evidence suggest that siliceous ascending hydrothermal solution along the fracture is responsible for the formation of talc. It was considered that the slight fracturing of dolomite was formed by deformation prior to the mineralization.

• Elastomers and Composites
• /
• 제15권3호
• /
• pp.147-154
• /
• 1980

The cellular rubber products for industrial purpose have been applied in many fields such as auto-motive parts, ship-building, machinery, sports goods, diving suit or interior housings etc. The purpose of this dissertation is to study the physical properties of celluar rubber products particulary for those elastomers such as EPDM, CR and NBR with heat resistance property, weather proofness, and oil resistance characteristics respectively, aiming at improving their quality, and renovating the manufacturing know-how which is beyond our technical power at the present time in Korea. In order to meet this requirement an ideal recipe is being shown for the three elastomers, and also a practical recipe which is easily available in terms of compounding ingredients in domestic market has set up as shown in Table 1. for the investigation of vulcanization characteristics by means of Rheometer. The optimum Mooney viscosity of compounded rubber was found to be approximately $ML_{1+4}(100^{\circ}C)$ $30\sim45$. Excess mustication makes a dispersion of ingredients worse, consequently it causes deformation of shapes and heterogenous cell distribution. In other words the articles are rejected because of its insufficient workmanship. The results of physical properties of the products are indicated in Table 3. It has shown that the quality meet requirement when tested in accordance with ASTM D572, 573 and D 395. The test results o CR/IR blends in terms of hardness, volume change by blowing, tensile strength and elongation have been shown.

• 대한약침학회지
• /
• 제24권2호
• /
• pp.68-75
• /
• 2021

Objectives: The hair follicle is composed of more than 20 kinds of cells, and mesoderm derived dermal papilla cells and keratinocytes cooperatively contribute hair growth via Wnt/β-catenin signaling pathway. We are to investigate β-catenin expression and regulatory mechanism by CBD in alopecia hair tissues and dermal papilla cells. Methods: We performed structural and anatomical analyses on alopecia patients derived hair tissues using microscopes. Pharmacological effect of CBD was evaluated by β-catenin expression using RT-PCR and immunostaining experiment. Results: Morphological deformation and loss of cell numbers in hair shaft were observed in alopecia hair tissues. IHC experiment showed that loss of β-catenin expression was shown in inner shaft of the alopecia hair tissues, indicating that β-catenin expression is a key regulatory function during alopecia progression. Consistently, β-catenin expression was decreased in testosterone or PMA treated dermal papilla cells, suggesting that those treatments are referred as a model on molecular mechanism of alopecia using dermal papilla cells. RT-PCR and immunostaining experiments showed that β-catenin expression was decreased in RNA level, as well as decreased β-catenin protein might be resulted from ubiquitination. However, CBD treatment has no changes in gene expression including β-catenin, but the decreased β-catenin expression by testosterone or PMA was restored by CBD pretreatment, suggesting that potential regulatory effect on alopecia induction of testosterone and PMA. Conclusion: CBD might have a modulating function on alopecia caused by hormonal or excess of signaling pathway, and be a promising application for on alopecia treatment.

• 한국항공우주학회지
• /
• 제50권10호
• /
• pp.691-699
• /
• 2022

본 논문에서는 대형 메쉬 안테나 개발을 위한 모듈식 전개형 반사판 및 붐 구조의 전개 시 요구되는 구동력 및 전개 특성을 분석하고자 한다. 단위 전개 구조를 이용하여 모듈식 전개형 반사판 링과 붐 구조의 수납/전개된 형상을 분석하였다. Kane's 방정식을 이용하여 전개 구조물의 다물체 동역학 방정식을 유도하고 PUTD(Pseudo Upper Triangular Decomposition) 방법을 적용하여 구속조건 문제를 해결하였다. 다물체 동역학 시뮬레이션을 통해 설계된 모듈식 전개 반사판 링 그리고 붐 구조의 동적 특성을 살펴보고자 한다.

• 한국재료학회지
• /
• 제33권2호
• /
• pp.63-70
• /
• 2023

In this study, crystallization was effectively suppressed in Al-based metallic glasses (Al-MGs) during pulverization by cryo-milling by applying an extremely low processing temperature and using a surfactant. Before Al-MGs can be used as an additive in Ag paste for solar cells, the particle sizes of the Al-MGs must be reduced by milling. However, during the ball milling process crystallization of the Al-MG is a problem. Once the Al-MG is crystallized, they no longer exhibit glass-like behavior, such as thermoplastic deformation, which is critical to decrease the electrical resistance of the Ag electrode. The main reason for crystallization during the ball milling process is the heat generated by collisions between the particles and the balls, or between the particles. Once the heat reaches the crystallization temperature of the Al-MGs, they start crystallization. Another reason for the crystallization is agglomeration of the particles. If the initially fed particles become severely agglomerated, they coalesce instead of being pulverized during the milling. The coalesced particles experience more collisions and finally crystallize. In this study, the heat generated during milling was suppressed by using cryo-milling with liquid-nitrogen, which was regularly fed into the milling jar. Also, the MG powders were dispersed using a surfactant before milling, so that the problem of agglomeration was resolved. Cryo-milling with the surfactant led to D50 = 10 um after 6 h milling, and we finally achieved a specific contact resistance of 0.22 mΩcm² and electrical resistivity of 2.81 μΩcm using the milled MG particles.

• 한국지반환경공학회 논문집
• /
• 제9권6호
• /
• pp.31-41
• /
• 2008

본 연구에서는 해성점토로 기 매립된 준설토 지반의 압밀특성 및 평가방법에 대한 연구를 실시하였다. 자중압밀 진행 중인 고함수비의 준설매립지반은 불교란 시료의 채취가 사실상 불가능하므로 압밀특성 파악에 어려움이 있다. 이를 위해 실무에서 압밀거동 분석을 위해 적용하는 압밀정수를 교란된 시료로 이용하여 실내실험으로 평가하는 방법에 대하여 연구를 진행하였다. 실험은 기본물성실험과 표준압밀실험, 일정변형률압밀실험과 60, 100, 150mm 직경의 Rowe-cell압밀실험을 수행하였으며, 함수비 조건을 변화하면서 40g의 중력수준에서 원심모형실험을 수행하였다. 실내 압밀실험시 현장의 응력조건에 해당하는 강제압밀로 시료를 조성하여 보다 합리적인 압밀특성을 파악할 수 있었다. 원심모형실험결과로 획득한 시간-침하관계를 침하예측기법으로 분석하여 최종침하량을 분석하였다. 분석결과, Asaoka방법을 적용한 해석결과가 원심모형실험에 의한 자중압밀결과의 경향을 잘 나타내었으며, 이를 통하여 최종침하량을 추정하였다. 또한, 실내압밀실험과 자중압밀실험결과에 대한 역해석을 통하여 유한변형률 압밀이론의 간극비-유효응력-투수계수 구성관계식을 산정하였다. 구성관계와 다양한 압밀실험을 통하여 획득한 결과를 비교 분석하여 연구대상 지역의 압축지수, 팽창지수, 체적변화계수, 연직 및 수평압밀계수 등의 압밀정수를 제안하였다.