• 한국결정학회지
• /
• 제11권2호
• /
• pp.89-94
• /
• 2000

A crystallographic unit cell can be transformed into another one by a 3×3 transformantion matrix. If the determinant of the transformation matrix has a negative value, the newly transformed unit cell becomes a left-handed cell. The best way of transforming the left-handed cell to the right-handed one is to multiply each element of the transformation matrix by-1, and its corresponding transformation matrix must be applied tot he atomic coordinates of a noncentrosymmetric crystal so as to maintain the absolute configuration unchanged. The behaviour of absolute configuration caused by transforming the crystallographic unit cell was examined theoretically and experimentally on the compound (S)-(+)-4-phenyl-1-[4-aminobenzoyl) indoline-5-sulfonyl]-4,5-dihydro-2-imidazolone hydrochloride.

• Journal of Communications and Networks
• /
• 제13권4호
• /
• pp.367-376
• /
• 2011

In this paper, we propose self-organizing schemes for the initial configuration of the neighbor cell list (NCL), maintenance of the NCL, and physical cell identifier (PCI) allocation in heterogeneous networks such as long term evolution systems where lower transmission power nodes are additionally deployed in macrocell networks. Accurate NCL maintenance is required for efficient PCI allocation and for avoiding handover delay and redundantly increased system overhead. Proposed self-organizing schemes for the initial NCL configuration and PCI allocation are based on evolved universal terrestrial radio access network NodeB (eNB) scanning that measures reference signal to interference and noise ratio and reference symbol received power, respectively, transmitted from adjacent eNBs. On the other hand, the maintenance of the NCL is managed by adding or removing cells based on periodic user equipment measurements. We provide performance analysis of the proposed schemes under various scenarios in the respects of NCL detection probability, NCL false alarm rate, handover delay area ratio, PCI conflict ratio, etc.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2008년도 춘계학술대회 논문집
• /
• pp.572-575
• /
• 2008

Flow-field design has much influence over the performance of proton exchange membrane fuel cell (PEMFC) because it affects the pressure magnitude and distribution of the reactant gases. To obtain the pressure magnitude and distribution of reactant gases in four kinds of flow-field designs without additional measurement equipment, computational fluid dynamics (CFD) analysis was performed. After the CFD analysis, the performance values of PEMFC according to the flow-field configurations were measured via a single cell test. As expected, the pressure differences due to different flow-field configurations were related to the PEMFC performance because the actual performance results showed the same tendency as the results of the CFD analysis. A large pressure drop resulted in high PEMFC performance. So, the single serpentine configuration gave the highest performance. On the other hand, the parallel flow-field configuration gave the lowest performance because the pressure difference between inlet and outlet was the lowest.

• 한국광학회지
• /
• 제13권2호
• /
• pp.162-165
• /
• 2002

본 논문에서는 반투과 반사판과 22.5$^{\circ}$의 in-plane tilt각을 가지며 λ/2로 설계된 반강유전성 액정 셀을 이용하여 새로운 형태의 반투과형 LCD모드의 구조를 제시하였다. 제안된 구조에서, 투과형 모드뿐만 아니라 광대역 λ/4 필름을 사용한 반사형 모드에서도 높은 밝기와 명암대비비를 구현해 낼 수 있었다.

• 산업경영시스템학회지
• /
• 제24권64호
• /
• pp.21-28
• /
• 2001

This paper suggests a new heuristic to improve robotic cells efficiency with a finite buffer. An efficient heuristic for parts sequencing with this configuration is developed. Analyzing robot\\`s movements and defining the events for the completion times of robot\\`s segmental activities enable us to develop a mathematical model that can be used to estimate, the completion time in the robotic cell. The robotic cell is consisting of two computer numerical control machines and a finite buffer to manufacture multiple parts. The developed heuristic can be used to estimate an optimum or near optimum parts sequences for this configuration. Numerical examples are followed to show the validity of the heuristic.

• Journal of Information Display
• /
• 제4권2호
• /
• pp.25-28
• /
• 2003

We propose a new optical configuration of a hybrid-aligned nematic liquid crystal cell for reflective displays, which consist of a biaxial film for obtaining wide viewing angle and a half-wave film for achieving high contrast. As a result, we can achieve wide viewing angle of (80( for the horizontal direction and (50( for the vertical direction and uniform reflection spectrum.

• 한국전기전자재료학회논문지
• /
• 제36권5호
• /
• pp.442-453
• /
• 2023

Tandem or multijunction solar cells (MJSCs) can convert sunlight into electricity with higher efficiency (η) than single junction solar cells (SJSCs) by dividing the solar irradiance over sub-cells having distinct bandgaps. The efficiencies of various common SJSC materials are close to the edge of their theoretical efficiency and hence there is a tremendous growing interest in utilizing the tandem/multijunction technique. Recently, III-V materials integration on a silicon substrate has been broadly investigated in the development of III-V on Si tandem solar cells. Numerous growth techniques such as heteroepitaxial growth, wafer bonding, and mechanical stacking are crucial for better understanding of high-quality III-V epitaxial layers on Si. As the choice of growth method and substrate selection can significantly impact the quality and performance of the resulting tandem cell and the terminal configuration exhibit a vital role in the overall proficiency. Parallel and Series-connected configurations have been studied, each with its advantage and disadvantages depending on the application and cell configuration. The optimization of both growth mechanisms and terminal configurations is necessary to further improve efficiency and lessen the cost of III-V on Si tandem solar cells. In this review article, we present an overview of the growth mechanisms and terminal configurations with the areas of research that are crucial for the commercialization of III-V on Si tandem solar cells.

• 공업화학
• /
• 제21권1호
• /
• pp.87-92
• /
• 2010

탄소전극으로만 구성된 단위 셀(CDI)과 음극 표면에 양이온교환막을 결합한 단위 셀(MCDI)을 제작하여 탈염실험을 수행하였다. 실험결과 탈염속도와 탈염량은 셀 전위가 증가할수록 선형적으로 증가하였다. 그러나 동일한 탄소전극을 사용했음에도 불구하고 MCDI 셀이 CDI 셀보다 높은 탈염효율을 보였다. 셀 전위를 0.8~1.2 V로 변화시키면서 실험한 결과 흡착량은 셀 전위에 따라 MCDI 셀이 CDI 셀보다 33.1~135% 정도 증가하는 것으로 나타났다. 또한 전류효율에서도 MCDI 셀은 80% 정도를 나타낸 반면 CDI 셀은 40% 이하의 전류효율을 나타내었다. MCDI 셀에서 탈염효율이 높은 원인은 흡착 및 탈착전위가 인가되었을 때 전극 표면의 전기이중층과 bulk 용액 사이에서 이온들이 선택적으로 이동하기 때문인 것으로 사료된다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.614-615
• /
• 2009

For the high reflectance under the ambient light condition, a highly efficient diffractive reflector has been proposed, based on a micro grating structure.[1] This reflector was designed to show highly concentrated distribution of the reflected light to the normal direction of the reflector under specific incident conditions of the light. In order to apply a diffractive reflector to a reflective liquid crystal display, the coupling between the viewing angle characteristics of a liquid crystal (LC) cell and the reflective distribution of the reflector should be considered. Under the optimum configuration confirmed through the analysis of the coupling between a LC cell and a reflector, a reflective vertical alignment (VA) cell with a diffractive reflector shows contrast ratio and brightness much higher than that with a conventional bumpy reflector.

• 산업공학
• /
• 제5권2호
• /
• pp.87-100
• /
• 1992

This paper presents FMC prototypes developed to propagate manufacuting automation for small and medium sized enterprises in Korea. The system consists of two cells used to machine oil pump drive gears, turing cell and hobbing cell. Characteristics and processes of the fears are anaylzed for the cell design. The system configuration and functions of individual component machines are described. Furthermore, the developed system is compared with the current manual system in terms of manpower and cost reduction and productivity increase.