• Journal of Plant Biotechnology
• /
• 제38권4호
• /
• pp.285-292
• /
• 2011

식물 잎의 발달과정에서 heteroblasty는 외부 환경에 대한 식물의 형태적 적응 방법을 매우 잘 반영하며 이에 따른 변화는 기관의 최종 형태와 크기에 영향을 미친다. Heteroblasty를 나타내는 인자 중에서 leaf index는 단엽식물의 잎의 최종 모양과 크기를 나타내는 대표적인 인자이다. Leaf index는 결국 잎몸에서의 세포 증식과 세포 신장의 두 요인에 의해 결정된다. 비록 세포의 증식과 신장을 조절하는 유전자와 조절 기작들이 연구되고 있으나 큰 청사진을 제시하기에는 아직 미흡하다. 본 연구에서는 발달과정 중 잎의 leaf index 조절에 관여하는 유전자를 밝히고 그 조절 기작을 알아내기 위하여 애기장대 돌연변이체를 이용한 분자유전학적, 생리학적인 실험을 수행하였다. 잎과 잎 세포가 커지는 돌연변이체인 macrophylla (mac)를 선발하여 잎의 확장과정과 leaf index의 이상으로 인해 잎 기관의 모양뿐 만 아니라 heteroblasty에 변화가 발생했다는 사실을 밝혀냈다. 또한 이 돌연변이체는 기존에 알려진 ROTUNDIFOLIA3 (ROT3) 유전자의 점 돌연변이에 의해 일어났다고 판명되었고 mac/rot3-5로 명명되었다. 브라시노스테로이드 처리로 인해 ROT3 유전자의 발현이 음성 되먹임 저해를 받는 것으로 보아 ROT3 유전자가 브라시노스테로이드 생합성에 관여함을 제시하였다. 또한 암상태에서 ROT3 유전자의 발현이 증가하며, mac/rot3-5 돌연변이체가 야생형보다 암반응이 약하게 나타났다. 이러한 분석 결과를 토대로 본 논문은 ROT3 유전자가 잎의 확장과정에서 잎의 leaf index 조절과 고유한 heteroblasty의 정립에 중요한 역할을 수행하며, 브라시노스테로이드 호르몬의 조절을 통하여 음지회피성과 같은 환경조절반응을 수행하고 있다는 새로운 사실을 제시하였다.

• 대한임상검사과학회지
• /
• 제47권1호
• /
• pp.39-45
• /
• 2015

We investigated whether multiple infections can be used as predictors of progression to carcinogenesis in accordance with the cytological diagnosis in women receiving abnormal cytologic diagnosis as analysis genotype and compared to single infection. HPV prevalence is highest in the age of under 30 years old woman, HPV prevalence is started to lower after 30 years old and started to increase over 60 years old as like a U-shape. The specific HPV genotypes is an important factor because increased single infection and reduced multiple infections and appeared single infection with AC in progressing carcinogenesis. HPV 16 revealed the statistical significance at the single infection in squamous cell lesions, and HPV 18 revealed the statistical significance at the single infection in adenocarcinoma with showed HPV 16, 58, 18, 52-type distribution.

• 한국전기화학회:학술대회논문집
• /
• 한국전기화학회 1998년도 전지기술 심포지움
• /
• pp.7-27
• /
• 1998

In order to design capacity of lithium ion battery, some calculations were carried out based on the characteristics of materials by the given battery shape and dimension. The principle of design was built by the interpretation of the correlation of material, electrochemical and battery factors. Parameters of materials are fundamental physical properties of constituent such as cathode. separator, anode, current collectors and electrolyte. Electrochemical factor includes potential pattern as a function of specific capacity, specific discharge capacity(or initial irreversible specific capacity or Ah efficiency) as a function of specific charge capacity and material balancing. Parameters of battery are dimension, construction hardware and performance. Battery capacity was simulated for a lithium cobalt dioxide as cathode and a hard carbon as anode to achieve 1100 mAh for the charge limit voltage of 4.2V, the weight ratio(+/-) of 2.4 and ICR18650. A fabricated test cell (ICR18650) which have weight ratio(+/-) of 2.4 discharged to 1093 mAh for the charge limit voltage of 4.2V. The sequential discharge capacity show good correspondence with designed capacity.

• 한국정밀공학회지
• /
• 제29권6호
• /
• pp.640-647
• /
• 2012

Current electronic products are dominated by the laser processing and the application will be extended this time. Especially, demands for high precision laser processing with a large area has been increasing for a number of applications such as in solar cell battery, display parts, electronic component and automobile industry. In this paper we designed an on-the-fly system for ultrafast/high precision/large area laser processing. In addition, we have developed the path algorithm for large area. Expansion of the area in which laser processing is an important factor to handle the ultrafast/wide area processing, it will require a processing path. Processing path is path of 2- axis stage and stage of change in velocity can be smooth as possible. We proposed a path of the user concept using NURBS(Non-Uniform Rational B-Spline)method. Through our experiment with the chopper, was to prove the continuity of edge parts. Through basic shape experiments, we proved that large area can be processed using laser. We developed a simulation tool using Visual C++.

• 신재생에너지
• /
• 제16권4호
• /
• pp.49-64
• /
• 2020

Photovoltaic and Thermal collector (PV/T) systems are renewable energy devices that can produce electricity and heat energy simultaneously using solar panels and heat exchangers. Since PV/T systems are exposed to the outdoors, their reliability is affected by various environmental factors. This paper presents a reliability test for a PV/T system and evaluates the test results. The reliability assessment entails performance, environment, safety, and life tests. The factor that had the greatest influence on the life of the system was the hydraulic pressure applied to the heat exchanger. A test was conducted by repeatedly applying pressure to the PV/T system, and a reliability analysis was conducted based on the test results. As a result, the shape parameter (β) value of 5.6658 and the B10life 308,577 cycles at the lower 95% confidence interval were obtained.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2009년도 추계학술발표대회
• /
• pp.39.1-39.1
• /
• 2009

NiTi alloy is widely used innumerous biomedical applications (orthodontics, cardiovascular, orthopaedics, etc.) for its distinctive thermomechanical and mechanical properties such as shape memory effect, super elasticity, low elastic modulus and high damping capacity. However, NiTi alloy is still a controversial biomaterial because of its high Ni content which can trigger the risk of allergy and adverse reactions when Ni ion releases into the human body. In order to improve the corrosion resistance of the TiNi alloy and suppress the release of Ni ions, many surface modification techniques have been employed in previous literature such as thermal oxidation, laser surface treatment, sol-gel method, anodic oxidation and electrochemical methods. In this paper, the NiTi was electrochemically etched in various electrolytes to modify surface. The microstructure, element distribution, phase composition and roughness of the surface were investigatedby scanning electron microscopy (SEM), energy-dispersive X-ray spectrometry(EDS), X-ray diffractometry (XRD) and atomic force microscopy (AFM). Systematic controlling of nano and submicron surface features was achieved by altered density of hydro fluidic acid in etchant solution. Nanoscale surface topography, such as, pore density, pore width, pore height, surface roughness and surface tension were extensively analyzed as systematical variables.Importantly, bone forming cell, osteoblast adhesion was increased in high density of hydro fluidic treated surface structures, i.e., in greater nanoscale surface roughness and in high surface areas through increasing pore densities.All results delineate the importance of surface topography parameter (pores) inNiTi to increase the biocompatibility of NiTi in identical chemistry which is crucial factor for determining biomaterials.

• Clinical and Experimental Reproductive Medicine
• /
• 제21권2호
• /
• pp.149-156
• /
• 1994

Failure of in vitro fertilization may occur even though oocyte and semen parameters seem satisfactory. Quantified ultrastructural study of spermatozoa was performed in three cases of failed in vitro fertilization. The results were compared to those of four fertile men. Quantification was achieved by cataloguing cell defects of the spermatozoon heads and mid/principal pieces of the flagella. Using the data from each specimen, the percentages of total cellular abnormalities in the head/mid/principal pieces were established. The percentages of anomalies of the midpiece and of the principal piece were not significantly different between failed cases and controls. The percentage of cell alterations of the head (96-100 vs 75${\pm}$3,4%), the percentage of combined anomalies of the head (80-86 vs 52.5${\pm}$1.9%), and the percentages of nuclear shape deformation (68-86 vs 47.5${\pm}$6.3%), acrosomal defects (86-96 vs 50${\pm}$4.3%), and postacrosomal sheath defects (78-88 vs 44.5${\pm}$7.2%) of the head were significantly different between failed cases and controls. Due to the cost and time involved in processing semen samples for electron microscopy, the widespread application of this technique to all couples presenting for IVF certainly is not warranted. However, in selected instances electron microscopy may play a crucial role in identifying an occult male factor.

• Journal of Korean Neurosurgical Society
• /
• 제59권2호
• /
• pp.106-116
• /
• 2016

Objective : Protein disulfide isomerase (PDI) acts as a chaperone on the cell surface, and it has been reported that PDI is associated with the tumor cell migration and invasion. The aims of this study are to investigate the anti-migration effect of bacitracin, which is an inhibitor of PDI, and the associated factor in this process. Methods : U87-MG glioma cells were treated with bacitracin in 1.25, 2.5, 3.75, and 5.0 mM concentrations. Western blot with caspase-3 was applied to evaluate the cytotoxicity of bacitracin. Adhesion, morphology, migration assays, and organotypic brain-slice culture were performed to evaluate the effect of bacitracin to the tumor cell. Western blot, PCR, and gelatin zymography were performed to investigate the associated factors. Thirty glioma tissues were collected following immunohistochemistry and Western blot. Results : Bacitracin showed a cytotoxicity in 3rd (p<0.05) and 4th (p<0.001) days, in 5.0 Mm concentration. The cell adhesion significantly decreased and the cells became a round shape after treated with bacitracin. The migration ability, the expression of phosphorylated focal adhesion kinase (p-FAK) and matrix metalloproteinase-2 (MMP-2) decreased in a bacitracin dose- and time-dependent manner. The U87-MG cells exhibited low-invasiveness in the 2.5 mM, compared with the untreated in organotypic brain-slice culture. PDI was expressed in the tumor margin, and significantly increased with histological glioma grades (p<0.001). Conclusion : Bacitracin, as a functional inhibitor of PDI, decreased the phosphorylated FAK and the secreted MMP-2, which are the downstream of integrin and play a major role in cell migration and invasion, might become one of the feasible therapeutic strategies for glioblastoma.

• Bulletin of the Korean Chemical Society
• /
• 제35권8호
• /
• pp.2290-2294
• /
• 2014

For the present study, rhEGF was encapsulated into solid lipid nanoparticles (SLNs). The SLNs were prepared by the $W_1/O/W_2$ double emulsification method combined with the high pressure homogenization method and the physical properties such as particle size, zeta-potential and encapsulation efficiency were measured. The overall particle morphology of SLNs was investigated using a transmission electron microscopy (TEM). The percutaneous skin permeation and accumulation property of rhEGF was evaluated using Franz diffusion cell system along with confocal laser scanning microscopy (CLSM). The mean particle size of rhEGF-loaded SLNs was $104.00{\pm}3.99nm$ and the zeta-potential value was in the range of -$36.99{\pm}0.54mV$, providing a good colloidal stability. The TEM image revealed a spherical shape of SLNs about 100 nm and the encapsulation efficiency was $18.47{\pm}0.22%$. The skin accumulation of rhEGF was enhanced by SLNs. CLSM image analysis provided that the rhEGF rat skin accumulation is facilitated by an entry of SLNs through the pores of skin.

• 한국산림과학회지
• /
• 제90권4호
• /
• pp.535-542
• /
• 2001

이 연구의 목적은 토사붕괴산지재해에 대한 산지의 기능적합도 평가를 위한 공간분석모델링기법을 개발하기 위해 수행되었다. 기능적합도는 산지의 토사붕괴 가능성에 따라 상, 중, 하의 3단계로 구분되었다. 토사붕괴의 가능성온 경사, 모암, 토심, 경사형태, 임상 및 임목의 직경급과 같은 7개의 입지인자들에 대한 측정치를 이용하여 추정되었고, 이 과정에 토사붕괴 발생 요인으로서 각 인자들의 상대적 가중치는 AHP기법에 의해 결정되었다. 공간분석모델링은 7개 입지인자들에 대한 $25m{\times}25m$ grid 분석 혹은 TIN 분석을 통해 기초 layer 작성에서 시작된다. 이를 토대로 재분류 및 점수화 과정을 거쳐 토사붕괴 가능성 추정에 필요한 인자들의 속성 값을 지니는 새로운 layer를 형성한다. 이러한 속성 값에 가중치를 적용하고 지도대수분석을 통해 $25m{\times}25m$ cell 단위의 기능평가도를 작성하고, 마지막으로 cell-grouping을 통해 보다 실무적인 기능도를 작성하게 된다. 이 논문은 이러한 일련의 공간분석모델링 과정을 방법론적 관점에서 제시한다.