• 한국전기전자재료학회논문지
• /
• 제33권2호
• /
• pp.105-108
• /
• 2020

In this study, experiments and simulations were conducted for a 1,200-V-class trench Si insulated-gate bipolar transistor (IGBT) with a small cell pitch below 2.5 ㎛. Presently, as a power device, the 1,200-V-class trench Si IGBT is used for automotives including electric vehicles, hybrid electric vehicles, and industrial motors. We obtained a breakdown voltage of 1,440 V, threshold of 6 V, and state voltage drop of 1.75 V. This device is superior to conventional IGBTs featuring a planar gate. To derive its electrical characteristics, we extracted design and process parameters. The cell pitch was 0.95 ㎛ and total wafer thickness was 140 ㎛ with a resistivity of 60 Ω·cm. We will apply these results to achieve fine-pitch gate power devices suitable for electrical automotive industries.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.61-64
• /
• 2008

We investigated experimentally the influence of the generation efficiency for excited Xe atoms on ultra-fine horizontal cell pitch AC PDPs. In the case of a 0.1 mm cell pitch, the sustain voltage increased; however, the generation efficiency was equal to or higher than for the conventional 0.22 mm cell pitch.

• 한국세라믹학회지
• /
• 제37권2호
• /
• pp.128-133
• /
• 2000

In this work, soft carbons produced by pyrolysis of petroleum and coal-tar pitch were used as the negative electrode for Li-ion batteries. We studeid the charge/discharge capacity and the interfacial reaction of these electrodes by constructing a half cell. Charge/discharge property was studied by a constant-current step and the interfacial reaction between the electrolyte and the surface of a carbon electrode was studied by the cyclic voltammetry. The initial charge/discharge capacity for the coal-tar pitch carbon increased exceedingly with the heat treatment temperature. On hte other hand, the capacity of the petroleum pitch carbon increased with temperature up to 1000$^{\circ}C$, thereafter decreased continuously. While the charge capacity decreased with the cycle number, the reversibility increased above 90%. In addition, the thermal stability and crystallization of petroleum and coal-tar pitches were analyzed by TGA and XRD, respectively.

• 폴리머
• /
• 제30권2호
• /
• pp.182-186
• /
• 2006

CLC는 주기적인 나선구조 때문에 빛을 선택적으로 반사하는 특성을 보이는데, 반사 파장대역이 넓은 CLC를 광반응에 의한 상 분리 현상을 이용하여 제조하였다. CLC 액정 셀에 의하여 반사되는 빛의 파장은 노광하는 빛의 세기가 작을수록 그리고 UV 흡수 dye의 양이 증가할수록 범위가 증가하여 초기 50 nm의 반사 파장대역을 300 nm까지 넓힐 수 있었다. 광경화된 CLC 액정 셀 내에 상 분리에 의하여 형성된 다양한 CLC 피치 분포를 SEM으로 관찰하였고, ATR-IR 실험을 이용하여 CLC피치 분포가 넓어지는 것이 상 분리에 의한 것임을 확인하였다.

• Korean Chemical Engineering Research
• /
• 제58권1호
• /
• pp.142-149
• /
• 2020

본 연구에서는 인조흑연의 낮은 이론용량을 개선하기 위하여 음극소재로서 흑연/실리콘/피치 복합소재의 전기화학적 성능을 조사하였다. 구형의 인조 흑연 표면을 polyvinylpyrrolidone (PVP) 양친성 물질로 코팅한 후 실리카를 성장시켜 흑연/실리카 소재를 합성하였으며, 석유계 피치 코팅과 마그네슘 열 환원법을 통해 흑연/실리콘/피치 복합소재를 제조하였다. 흑연/실리콘/피치 복합소재의 전극은 poly(vinylidene fluoride) (PVDF), carboxymethyl cellulose (CMC), polyacrylic acid (PAA) 바인더에 따라 제조하였으며, 다양한 전해액과 첨가제를 이용하여 전지를 조립하였다. 흑연/실리콘/피치 복합소재는 X-ray diffraction (XRD), scanning electron microscope (SEM)와 thermogravimetric analyzer (TGA)를 통해 물리적 특성을 분석하였으며, 전기화학적 특성은 충 방전 사이클, 율속, 순환전압전류, 임피던스 테스트를 통해 조사하였다. 흑연/실리콘/피치 복합소재는 흑연 : 실리카 : 피치 = 1 : 4 : 8일 때 높은 사이클 안정성을 보였다. PAA 바인더를 사용하여 제조된 전극은 높은 용량과 안정성을 보였으며, EC:DMC:EMC 전해액을 사용하였을 때 719 mAh/g의 높은 초기 용량과 우수한 사이클 안정성 나타내었다. 또한 vinylene carbonate (VC) 첨가시에 2 C/0.1 C 일 때 77% 용량 유지율과 0.1 C/0.1 C 일 때 88% 용량 회복을 나타냄을 확인하였다.

• 한국수소및신에너지학회논문집
• /
• 제21권4호
• /
• pp.295-300
• /
• 2010

Metal bipolar plate applied to Polymer Electrolyte Membrane Fuel Cell is getting most attractive due to their good feasibility of mass production and low cost. But it is one of the immediate causes of performance decline because it is difficult to reduce channel pitch of metal bipolar plate. In this study, mesh was inserted in between bipolar plate and GDL to obtain uniform contact pressure without reducing channel pitch. The section measuring and performance test were carried out to confirm the mesh structure distributes contact pressure equally in reacting area. The performance of 3 type mesh structures developed in this study were higher than the normal cell at all over the current range. Especially, it showed that the mesh cell performance was increased and pressure drop was decreased with diminishing mesh gap size. The Mesh structure was more sensitive to humidification and contact pressure change than the normal cell.

• 폴리머
• /
• 제30권5호
• /
• pp.422-425
• /
• 2006

콜레스테릭 액정은 주기적인 나선구조 때문에 빛을 선택적으로 반사하는 특성을 보이는데, 반사파장 대역이 넓은 cholesteric liquid crystal(CLC) 필름을 서로 다른 피치를 가지는 두 cyclic siloxane CLC의 열확산이나 저분자 물질에 의한 확산을 이용하여 제조하였다. 확산에 의한 CLC 액정 셀 내에 형성된 다양한 CLC 피치 분포를 SEM으로 관찰하였고, UV/Vis spectrometer를 이용하여 CLC 피치 분포 변화를 조사하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 추계학술대회 논문집
• /
• pp.991-992
• /
• 2010

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 춘계학술대회논문집
• /
• pp.224-229
• /
• 2008

With the wide use of mobile phones, a paging signal by a sound transducer acts as an environmental noise on many occasions, thus necessitating an alternative paging signal by a vibration motor. Conventional vibration motors employ three-phase windings with mechanical brushes for commutation. In this paper, a new one-phase brushless and sensorless vibration motor is introduced utilizing digital signal processor chips in cell-phones. For electromagnetic field analysis, two-dimensional modeling can be implemented to determine the back electromotive force using axisymmetric boundary conditions. Geometric design parameters, such as coil pitch and magnet pitch. are considered for performance optimization. Through the experiments, it is shown that the proposed design has the equivalent performance with reduced number of parts, thus enhancing manufacturing productivity and reducing manufacturing cost.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 하계종합학술대회 논문집(2)
• /
• pp.269-272
• /
• 2001

In this paper we proposed the format converter design and implementation for real time image processing. This design method is based on realized the large processor-per-pixel array by integrated circuit technology in which this two types of integrated structure is can be classify associative parallel processor and parallel process with DRAM cell. Layout pitch of one-bit-wide logic is identical memory cell pitch to array high density PEs in integrate structure. This format converter design has control path implementation efficiently, and can be utilized the high technology without complicated controller hardware. Sequence of array instruction are generated by host computer before process start, and instructions are saved on unit controller. Host computer is executed the pixel-parallel operation starting at saved instructions after processing start