• 한국작물학회지
• /
• 제38권3호
• /
• pp.264-274
• /
• 1993

본 연구는 화청벼와 IR24의 돌연변이 계통인 분상질 및 심백 변이체의 작물학적 및 이화학적특성과 제병 및 알콜발효특성을 조사하여 그 가공적 이용성을 검토하고 분상질배유 유전자의 유전분리와 표지인자들과의 연관 관계를 밝히고자 수행하였으며 그 결과는 다음과 같다. 1. 돌연변이체의 종실은 원품종에 비해 작았으며, 천입중과 1$\ell$중도 전반적으로 가벼운 것으로 나타났다. 2. 변이체들의 출수기는 원품종과 같았으며, 정조수량은 원품종에 비해 낮았다. 3. 분상질 배유의 전분립은 느슨한 결정구조를 갖고 있었고, 전분립의 크기는 원품종과 변이체들간에 동일경향이 아니었으며, 원품종에 비해 변이체들은 밀도와 경도가 낮았다. 4. 변이체들의 아밀로스 함량은 16.9～28.5%로 변이복이 크게 나타났다. 현미의 조단백 함량에서 화청벼의 분상질변이체들은 원품종과 같았으나 IR24의 심백변이체인 47106은 원품종(8.30%)에 비해 11.32%로 높게 나타났다. 5. Gel consistency는 원품종들이 soft의 특성을 보였으나 분질 및 심백의 변이체에서는 모도 medium의 특성을 보였고, 백미의 알칼리 붕괴도는 원품종에 비해 분수질 변이체들에서 높게 나타났다. 6. Amylogram에 의한 호화개시 온도는 IR24의 분상질변이체(47160)를 제외하고 모도 원품종과 비슷하였으나, 최고점도와 최저점도 및 굳음성은 원품종 화청벼와 IR24에 비해 변이체에서 월등히 낮게 나타났다. 7. Instron으로 측정된 증편의 경도와 gumminess로 볼 때 화청벼 분상질 및 심백변이체로 조제된 증편은 다소 부드러운 특성을 나타냈으나, IR24의 경우는 일정 경향이 없었다. 분상질미와 심백미의 증편부피는 원품종에 비해 대체로 크게 나타났다. 8. 알콜발효 과정 중 당도 저하는 변이체들 특히 분상질에서 빨리 일어났고, 발효 10일 후의 알콜생성량도 원품종에 비해 변이체들에서 높게 나타나서 분상질미는 양조용으로서의 이용성이 크게 기대되었다. 9. 화청벼와 IR24에서 유래한 분상질 배유유전자들의 대립성 검정결과 서로 다른 3개의 유전자좌를 탐색하였으며, 그 유전자들을 각각 flo-a, flo-b, flo-c로 표시하였다. 10. flo-a 유전자는 IV번 연관군의 lg(liguleless ; 무엽설) 유전자와 5.76$\pm$1.72%(상반)로 연관되어 있었다.

• 생명과학회지
• /
• 제34권7호
• /
• pp.443-452
• /
• 2024

아가로오스의 효소가수분해산물로 부터 확보할 수 있는 3,6-무수갈락토오스(L-AHG), 네오아가로비오스(NA2), 네오아가로테트라오스(NA4) 및 네오아가로헥사오즈(NA6)의 항염증 활성을 규명하고자, 마우스 대식세포주 RAW264.7 세포를 대장균 유래 지질다당류(LPS)로 자극할 때 세포표면의 TLR4 수용체의 역할을 통해 유도되는 친염증성 M1 분극화 및 이에 따른 친염증성 반응에 미치는 영향을 조사하였다. 그 결과로서, 이들 아가로오스 분해산물들 중에서 단당류인 L-AHG만이 유일하게, LPS 자극에 의해 RAW264.7 세포에서 유도될 수 있는 M1 분극화의 대표적인 마커인 iNOS 효소의 발현과 이에 따른 NO 생성을 농도의존적으로 현저하게 저해하였고 염증 매개체인 프로스타글란딘 E2의 생성을 촉매하는 COX-2의 발현 수준도 LPS 자극후에는 증가하였지만, L-AHG의 존재에 의해서는 그 증가 수치가 다소 저해되는 것으로 나타났다. 이때 RAW264.7 세포에 대한 L-AHG의 세포독성은 확인되지 않았다. 또한 L-AHG는 LPS로 처리된 RAW264.7 세포내에서 유도되는 친염증 신호전달경로에 있어서 초기 신호전달 단계인 TAK1 활성화 단계까지는 별 영향을 나타내지 않았으나 TAK1의 촉매작용에 의한 JNK 및 p38 MAPK의 활성화 인산화(activating phosphorylation)는 현저하게 저해되었다. 특히, 대식세포의 친염증 신호전달경로에서 TAK1 활성화는, 그 하류 단계에서 NF-kB의 활성화가 성공적으로 일어날 수 있도록 해주며, 또한 TAK1에 의한 하류 신호분자인 p38 MAPK 활성화는 NADPH 활성화 및 이에 따른 친염증성 ROS 분자들의 생성을 유발하기 때문에, LPS에 의해 자극된 대식세포내의 친염증 신호전달경로에 있어서 TAK1-JNK/p38 MAPK 경로의 L-AHG에 의한 저해는 대식세포의 M1 분극화 및 친염증 반응을 억제하는 효과적인 기전이 되며, 그 활용성이 크게 기대된다. 아울러 L-AHG가 LPS와 RAW264.7 세포의 표면분자인 TLR4와 상호작용을 방해할 수 있는지에 대해서도 유세포분석기와 형광표지가 된 FITC-LPS를 이용하여 조사한 결과, L-AHG는 대식세포의 표면에서 이루어지는 LPS-TLR4 상호결합은 방해하지 않는 것으로 확인되었다. 이는 L-AHG의 항염증 작용의 표적이 LPS가 TLR4 수용체를 통해 유도하는 세포 내 신호전달경로에 있음을 지지해 준다. 이상의 연구결과들은 아가로오스 유래 희귀 단당류인 3,6-무수갈락토오스(L-AHG)가 LPS 자극에 의해 유발되는 RAW264.7 마우스 대식세포의 M1 분극화 및 염증 반응에 대해, TLR4의 친염증 신호전달경로의 TAK1-JNK/p38 MAPK 단계를 저해하는 항염증 활성을 효과적으로 발휘할 수 있음을 시사한다.

• Radiation Oncology Journal
• /
• 제21권4호
• /
• pp.299-305
• /
• 2003

목적: 후두암 방사선치료의 표준화를 위하여 후두암에 관한 기본적인 임상 자료를 축적하고 필요한 조사 항목을 결정하여 전국적인 웹 기반 데이터 베이스 시스템을 개발하고자 하였다. 대상 및 방법: 1998년 1월부터 1999년 12월까지 호서호남 지역에서 후두암으로 진단되어 방사선치료를 받은 환자를 대상으로 임상적 분석을 시행하였다. 환자 선정 기준은 18세 이상이며 과거력상 타 장기의 암 진단 병력이 없고 후두에서 기원한 원발성 상피세포암으로 과거 후두에 대한 다른 질환으로 치료력이 없는 환자를 대상으로 하였다. 후두암에 관한 조사 항목 개발은 대한방사선종양학회 호서호남지회 소속 병원의 전문의들이 합의하여 일차적으로 선정한 항목에 대하여 각 병원에서 자체적으로 조사하였다. 통계처리는 SPSS v10.0을 이용하였다. 결과: 자료가 수집된 총 증례수는 45예이었다. 환자의 연령분포는 28$\~$88세(중앙값: 61)이었고 남녀비는 10 대 1로 대부분 남자에 발생하였다. 원발부위는 성문암이 28예(62$\%$), 성문상부암이 17예(38$\%$)이었다. 병리소견으로는 편평세포암이 대부분이었다(44/45, 98$\%$). AJCC (1997년도) 병기 I+II는, 성문암 28예 중 24예(86$\%$)에 비해 성문상부암의 경우는 16예 중 8예(50$\%$)이었다(p=0.002). 증상은 애성이 n예(89%$\%$로 가장 많았다. 진단은 간접후두경이 전체환자에서, 직접후두경검사는 43예(98$\%$)에서 각각 시행되었다. 치료로서 성문암 28예와 성문상부암 17예 중, 방사선 단독치료는 21예(75$\%$), 6예(35$\%$)에서 각각 시행되었다. 또한 수술요법과 방사선요법의 병용은 각각 5예(18$\%$), 8예(47$\%$)이었고, 항암화학요법과 방사선요법의 병용치료는 각각 2예(7$\%$), 3예(18$\%$)이었으나 두 원발 병소 간에 병용치료 빈도의 유의한 차이는 없었다(p=0.20). 방사선치료는 모두 선형가속기 6 MV X-ray를 이용하여 통상적 분할조사 법으로 시행되었다. 분할선량은 성문암 환자의 86$\%$에서 2.0 Gy를 사용한 반면 성문상부암은 59$\%$에서 1.8 Gy를 각각 사용하였다. 방사선단독치료를 완료한 환자에서 원발병소의 평균 총방사선량은 성문암에서 65.98 Gy, 성문상부암에서 70.15 Gy이었다. 수집된 자료를 기초로 후두암 방사선치료형태 연구에 필요한 총 12개의 모듈과 90개의 항목을 개 발하였다. 결론: 본 연구에서는 후두암 데이터베이스 시스템에 필요한 연구 항목을 개발하였다. 향후 웹 기반 데이터 베이스 시스템을 완성하고 전국의 방사선치료 자료를 축적하여 후두암에 대한 한국형 방사선치료의 표준화 및 적정화를 기하고자 한다.

• Clinical and Experimental Pediatrics
• /
• 제49권3호
• /
• pp.317-325
• /
• 2006

목 적 : 주산기 저산소성 허혈성 뇌손상의 병태 생리에서 nitric oxide(NO)가 급성 저산소성 허혈(hypoxia-ischemia, HI) 후 재산소-재관류기(reoxygenation-reperfusion, RR)에 대뇌의 혈역학 및 에너지 대사에 미치는 영향을 규명하기 위하여, NO 합성 억제제인 NG-monomethyl-L-arginine(L-NMMA)와 NO 합성 촉진제인 L-arginine(L-Arg) 투여를 통하여 뇌신경 세포에 어떠한 영향을 주는지 알아보고자 하였다. 방 법 : 생후 3일 이내의 신생자돈 28마리를 대상으로 무작위로 나누어, Sham 처치만 받은 정상 대조군(n=9), HI와 RR만 유발한 실험 대조군(n=7), HI 이후 RR 직전에 L-NMMA 투여군(n=6)과 L-arginine 투여군(n=6) 등 4군으로 구분하였다. 실험은 ether을 흡입 시킨 후 thiopental을 정주하고, 기관 삽관 후 인공호흡기 등의 처지를 끝낸 후, HI를 유발하기 위하여 실험군에서 수술 겸자로 양측 경동맥을 폐쇄한 후 8% 산소로 30분간 흡입하였고, RR을 시행하기 위하여 경동맥 폐색을 풀고 흡입 산소농도를 60%로 올려 1시간까지 투여하면서 관찰하였다. 생리적 변수로 혈압과 동맥혈 가스 소견을 관찰하였고, 뇌의 혈역학적 변화와 에너지 상태는 near infrared spectroscopy(NIRS)를 이용하여 대뇌의 산화 헤모글로빈($HbO_2$), 환원헤모글로빈(Hb), 환산 헤모글로빈(HbD), 싸이토크롬 $aa_3$(Cyt $aa_3$) 등을 지속적으로 관찰하여 비교하였다. 또한 실험 종료 시 얻은 뇌조직에서 $Na^+$, $K^+$-ATPase의 활성도 및 지질 대사산물인 conjugated dienes, 고에너지 인분자인 ATP(adeninetriphosphate)와 phosphocreatine(PCr)을 비교하였다. 결 과 : 생리적 변수의 변화에서는 실험군 모두에서 정상 대조군에 비하여 혈압, 동맥혈 산소 분압, pH, base excess 등이 유의하게 감소하였고(P<0.05), 젖산은 유의하게 증가하였다(P<0.05). L-NMMA와 L-Arg군에서 실험 대조군과 유의한 차이는 없었다. 실험군에서 RR 1시간 후 pH를 제외한 혈압, 동맥혈 산소 분압, base excess 등의 이상소견은 모두 기저치로 회복되었고, 실험군간에 유의한 차이가 없었다. NIRS 소견에서 $HbO_2$와 HbD는 HI 동안 정상 대조군에 비하여 실험군 모두에서 유의하게 감소하였으나(P<0.05), RR 직후 기저치로 회복되었으며, $HbO_2$는 RR 40분 이후 정상 대조군에 비해 유의하게 감소하였다(P<0.05). Hb은 정상 대조군을 제외한 모든 실험군에서 HI 동안 유의하게 증가하였다가(P<0.05), RR 직후 기저치로 회복되었다. 산화 Cyt $aa_3$는 HI 동안 실험군 모두에서 감소하는 경향을 보였고, RR 이후 다시 증가하였다. 정상 대조군과 각 실험군간에 유의한 차이는 없었다. 뇌의 $Na^+$, $K^+$-ATPase 활성도와 conjugated dienes은 실험군 모두에서 정상 대조군(제1군)에 비하여 유의하게 감소하였다(P<0.05). 뇌의 ATP, phosphocreatine은 실험군 모두에서 정상 대조군과 차이가 없었고, 또한 실험군간에도 유의한 차이가 없었다. 결 론 : 신생 자돈에서 급성 저산소성 허혈 이후 재산소-재관류기 동안 NO 합성 억제제인 L-NMMA나 NO 생성 촉진제인 L-arginine이 뇌 혈역학이나 뇌의 에너지 대사에는 특별한 변화를 일으키지 않았다. 따라서 급성 저산소성 허혈성 뇌손상에서 재산소화 재관류기 초기에는 NO가 뇌손상의 주요한 기전으로 작용하지 않을 것으로 사료된다. 또한 뇌혈역학 및 생화학적 검사 결과 등에서 급성기에는 에너지 부전 상태가 주요한 세포손상 기전이 아니고, 이온 농도의 변화에 의한 뇌부종, 산소유리기에 의한 뇌세포 손상이 저산소성 허혈성 뇌손상의 급성기에 주로 작용하는 뇌세포 손상의 주요 기전임을 시사한다. 따라서 NO 생성 억제제 혹은 생성 전구물질인 L-Arg은 뇌신경 세포 보호 효과를 보이지 않아 급성 주산기 가사의 치료제로서 제한이 됨을 알 수 있었다. 그러나 좀 더 명확한 효과를 보기 위하여 선택적 억제제의 사용, 제제의 용량 및 투여시기, 손상 후 좀더 긴 시간 이후의 변화에 대한 연구가 필요하다.

• Asia pacific journal of information systems
• /
• 제22권1호
• /
• pp.29-52
• /
• 2012

Consumers differ in the way they make a purchase. An audio mania would willingly make a bold, yet serious, decision to buy a top-of-the-line home theater system, while he is not interested in replacing his two-decade-old shabby car. On the contrary, an automobile enthusiast wouldn't mind spending forty thousand dollars to buy a new Jaguar convertible, yet cares little about his junky component system. It is product involvement that helps us explain such differences among individuals in the purchase style. Product involvement refers to the extent to which a product is perceived to be important to a consumer (Zaichkowsky, 2001). Product involvement is an important factor that strongly influences consumer's purchase decision-making process, and thus has been of prime interest to consumer behavior researchers. Furthermore, researchers found that involvement is closely related to perceived risk (Dholakia, 2001). While abundant research exists addressing how product involvement relates to overall perceived risk, little attention has been paid to the relationship between involvement and different types of perceived risk in an electronic commerce setting. Given that perceived risk can be a substantial barrier to the online purchase (Jarvenpaa, 2000), research addressing such an issue will offer useful implications on what specific types of perceived risk an online firm should focus on mitigating if it is to increase sales to a fullest potential. Meanwhile, past research has focused on such consumer responses as information search and dissemination as a consequence of involvement, neglecting other behavioral responses like online merchant selection. For one example, will a consumer seriously considering the purchase of a pricey Guzzi bag perceive a great degree of risk associated with online buying and therefore choose to buy it from a digital storefront rather than from an online marketplace to mitigate risk? Will a consumer require greater trust on the part of the online merchant when the perceived risk of online buying is rather high? We intend to find answers to these research questions through an empirical study. This paper explores the impact of enduring product involvement and perceived risks on required trust level, and further on online merchant choice. For the purpose of the research, five types or components of perceived risk are taken into consideration, including financial, performance, delivery, psychological, and social risks. A research model has been built around the constructs under consideration, and 12 hypotheses have been developed based on the research model to examine the relationships between enduring involvement and five components of perceived risk, between five components of perceived risk and required trust level, between enduring involvement and required trust level, and finally between required trust level and preference toward an e-tailer. To attain our research objectives, we conducted an empirical analysis consisting of two phases of data collection: a pilot test and main survey. The pilot test was conducted using 25 college students to ensure that the questionnaire items are clear and straightforward. Then the main survey was conducted using 295 college students at a major university for nine days between December 13, 2010 and December 21, 2010. The measures employed to test the model included eight constructs: (1) enduring involvement, (2) financial risk, (3) performance risk, (4) delivery risk, (5) psychological risk, (6) social risk, (7) required trust level, (8) preference toward an e-tailer. The statistical package, SPSS 17.0, was used to test the internal consistency among the items within the individual measures. Based on the Cronbach's ${\alpha}$ coefficients of the individual measure, the reliability of all the variables is supported. Meanwhile, the Amos 18.0 package was employed to perform a confirmatory factor analysis designed to assess the unidimensionality of the measures. The goodness of fit for the measurement model was satisfied. Unidimensionality was tested using convergent, discriminant, and nomological validity. The statistical evidences proved that the three types of validity were all satisfied. Now the structured equation modeling technique was used to analyze the individual paths along the relationships among the research constructs. The results indicated that enduring involvement has significant positive relationships with all the five components of perceived risk, while only performance risk is significantly related to trust level required by consumers for purchase. It can be inferred from the findings that product performance problems are mostly likely to occur when a merchant behaves in an opportunistic manner. Positive relationships were also found between involvement and required trust level and between required trust level and online merchant choice. Enduring involvement is concerned with the pleasure a consumer derives from a product class and/or with the desire for knowledge for the product class, and thus is likely to motivate the consumer to look for ways of mitigating perceived risk by requiring a higher level of trust on the part of the online merchant. Likewise, a consumer requiring a high level of trust on the merchant will choose a digital storefront rather than an e-marketplace, since a digital storefront is believed to be trustworthier than an e-marketplace, as it fulfills orders by itself rather than acting as an intermediary. The findings of the present research provide both academic and practical implications. The first academic implication is that enduring product involvement is a strong motivator of consumer responses, especially the selection of a merchant, in the context of electronic shopping. Secondly, academicians are advised to pay attention to the finding that an individual component or type of perceived risk can be used as an important research construct, since it would allow one to pinpoint the specific types of risk that are influenced by antecedents or that influence consequents. Meanwhile, our research provides implications useful for online merchants (both online storefronts and e-marketplaces). Merchants may develop strategies to attract consumers by managing perceived performance risk involved in purchase decisions, since it was found to have significant positive relationship with the level of trust required by a consumer on the part of the merchant. One way to manage performance risk would be to thoroughly examine the product before shipping to ensure that it has no deficiencies or flaws. Secondly, digital storefronts are advised to focus on symbolic goods (e.g., cars, cell phones, fashion outfits, and handbags) in which consumers are relatively more involved than others, whereas e- marketplaces should put their emphasis on non-symbolic goods (e.g., drinks, books, MP3 players, and bike accessories).

• 대한의용생체공학회:의공학회지
• /
• 제6권2호
• /
• pp.1-8
• /
• 1985

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70$\pm$1.32mmHg/min)compared to CF dialyzers(4.32$\pm$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500, 550, 570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500, 550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100, 300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3, 000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.SpO2 with Plethysmograph.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 1993년도 한국우주과학회보 제2권2호
• /
• pp.17-17
• /
• 1993

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70${\pm}$1.32mmHg/min)compared to CF dialyzers(4.32${\pm}$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500,550,570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500,550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100,300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3,000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.

• Tuberculosis and Respiratory Diseases
• /
• 제45권4호
• /
• pp.861-869
• /
• 1998

연구배경: 조식의 손상에의한 염증반응후 회복과정에서 정상조직으로 환원되지 않고 일부는 결체조직으로 대체되어 섬유화가 일어난다. 이 비정상적 섬유화에 의해 섬유화증이 일어나 조직의 원래 기능을 상설하기도 한다. 이때 염증에 관계되는 세포로부터 분비된 여러종류의 cytokine들이 섬유모세포의 증식과 교원질 합성을 조절한다. 이에 관계된 cytokine들의 상호 관련성과 섬유모세포증식에의 영향을 알아내어 조절함으로써 섬유화증을 예방하고 치료하는데 도움을 줄 수 있다. 본 연구에서는 proinflammatory cytokine인 TNF-$\alpha$, IL-1$\beta$, IL-6와 섬유모세포의 증식에 큰 영향을 미치는 TGF-$\beta$의 상호 관련성을 알아보고자 하였다. 방 법: 섬유모세포는 사람 태아의 섬유모세포주인 MRC-5를 사용하였으며, 0, 0.5, 1, 5, 10, 20%의 우태아 혈청을 첨가하여 1, 2, 3, 4, 5일째의 MRC-5 증식을 측정하여, 최소한으로 MRC-5의 증식을 억제하면서 생존을 유지시킬 수 있는 배양액중 혈청농도를 먼저 확정한 후, TGF-$\beta$, TNF-$\alpha$, IL-1$\beta$, IL-6를 각각 RPMI 배지에 첨가하여 $37^{\circ}C$, 5% $CO_2$ 보온기에서 96 시간동안 배양하여 0.5 % naphthol blue black으로 염색한 뒤, 50mM의 NaOH로 naphthol blue black을 유리시켜 630nm에서의 분광흡수를 잼으로써 MRC-5의 수를 측정하였다. 또한 TGF-$\beta$와 다른 cytokine의 관련성을 알아보기위해 TGF-$\beta$와 함께 IL-1$\beta$, IL-6, TNF-$\alpha$를 각각 배지에 첨가하여 96 시간 배양 후, 위와 동일한 방법으로 MRC-5의 수를 측정하였으며, TNF-$\alpha$와 IL-1$\beta$, IL-6의 상호 관련성을 알아보기 위해 TNF-$\alpha$와 함께 IL-1$\beta$, IL-6를 각각 배지에 첨가하여 96 시간 배양한 뒤 위와 동일한 방법으로 MRC-5의 수를 측정하였고, 마지막으로 TGF-$\beta$와 TNF-$\alpha$의 섬유모세포 증식에 미치는 상호 관련성을 알아보기 위하여 TGF-$\beta$와 TNF-$\alpha$를 함께 배지에 첨가하여 96 시간 배양 후, MRC-5의 수를 역시 통일한 방법으로 측정하였다. 결 과: 1. 최소한으로 MRC-5의 증식을 억제하면서 생존을 유지할 수 있는 배양액중 혈청 농도를 측정한 결과, 0.5% 혈청 농도에서 MRC-5의 증식이 50% 증가된 상태로 배양 6일째 까지 유지되었다. 따라서 이후의 실험에서 사용된 배양액에는 0.5%의 우태아혈청을 포함시켰다. 2. 각 cytokine이 MRC-5 증식에 미치는 영향 0.5%의 우태아혈청만이 있는 상태에서의 MRC-5 증식 정도를 100%로 기준하였을 때, IL-1$\beta$는 50 ng/ml의 농도에서만 45%의 증식 촉진효과를 보였고, IL-6는 영향이 없었으며, TGF-$\beta$와 TNF-$\alpha$는 농도에 의존성을 보이며 MRC-5의 증식을 최고 160% 까지 증가시켰다. 3. TGF-$\beta$에 의한 MRC-5 증식능증가에 IL-1$\beta$, IL-6, TNF-$\alpha$가 미치는 영향 50 ng/ml의 TGF-$\beta$ 단독 자극에 비하여, IL-1$\beta$ 혼합배양시 농도에 의존성으로 보이며 최고 64% 까지, TNF-$\alpha$ 혼합배양시 농도에 의존성을 보이며 최고 159% 까지 MRC-5의 증식을 증가시켰다. IL-6는 약한 억제효과를 보였으나 TGF-$\beta$에 의한 MRC-5 증식능 증가에 영향을 미치지 못하였다. 4. TNF-$\alpha$에 의한 MRC-5 증식능 증가에 IL-1$\beta$, IL-6가 미치는영향 50 ng/ml의 TNF-$\alpha$ 단독자극에 비하여, IL-1$\beta$을 혼합 배양하였을때 농도에 의존성을 보이며 최고 50%까지 MRC-5의 증식을 억제하였고, IL-6는 영향을 미치지 못하였다. 5. TNF-$\alpha$와 TGF-$\beta$의 MRC-5 증식능 증가에서의 상호관련성 50 ng/ml의 TGF-$\beta$와 TNF-$\alpha$는 MRC-5의 증식을 각각 89%, 135% 증가시켰으며, TGF-$\beta$와 TNF-$\alpha$ 공존시에는 MRC-5의 증식을 222% 증가시켰다. 결 론: TNF-$\alpha$ TGF-$\beta$, IL-1$\beta$의 순서로 MRC-5에 대한 증식 자극효과가 있으며 IL-6는 증식을 억제하는 효과가 있었다. TGF-$\beta$의 MRC-5에 대한 증식 자극효과는 IL-1과 TNF-$\alpha$에 의해 첨가효과를 관찰할 수 있었고, TNF-$\alpha$의 MRC-5 증식 자극효과는 IL-1$\beta$에 의하여 억제되었다.