• 한국전기전자재료학회논문지
• /
• 제17권7호
• /
• pp.754-759
• /
• 2004

We have studied the fringe field switching (FFS) mode with the positive dielectric anisotropy for the fast response time. The factors such as the physical properties of the LC, the cell gap, and the rubbing angle were critical for the fast response time of the FFS mode. The response time became 10 ms faster when the rotational viscosity of the new LC is 20 mPa.s lower than the conventional LC. When the cell gap changed from 3.6 ${\mu}{\textrm}{m}$ to 3.0 ${\mu}{\textrm}{m}$, it was possible to achieve the total response time and response times associated with grey-to-grey transitions under 16 ms. And the response times including grey-to-grey transitions become fast as the rubbing angle decreases.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.482-483
• /
• 2007

For measurement of dielectric constants, the commercial parallel plate electrodes system with guard-ring electrode have been widely used up to now. The capacitance derived from the parallel plate electrodes capacitor with guard-ring electrode is calculated by the equation of ($C={\epsilon}\;{\cdot}\;\frac{area\;of\;electrod}{distance\;between\;electrodes}$). Therefore, in parallel plate electrode capacitor, the diameter of the guarded electrode, the gap size between guarded electrode and guard ring, and distance between two active electrode should be measured precisely to calculate dielectric constants from the measured capacitance. Consequently their mechanical measurement uncertainties are directly contributed. Especially the air-gap between the electrodes and dielectric specimen at the system must be existed and the measurement error derived from the air-gap is impossible to evaluate as measurement uncertainties. In this study, we analyze the uncertainty of the commercial dielectric constant test cell using 3 kinds CRMs.

• Nuclear Engineering and Technology
• /
• 제55권11호
• /
• pp.4120-4124
• /
• 2023

High-level radioactive waste produced by nuclear power plants are disposed subterraneously utilizing an engineered barrier system (EBS). A gap inevitably exists between the disposal canisters and buffer materials, which may have a negative effect on the thermal transfer and water-blocking efficiency of the system. As few previous experimental works have quantified this effect, this study aimed to create an experimental model for investigating differences in the temperature changes of bentonite buffer in the presence and absence of air gaps between it and a surrounding stainless steel cell. Three test scenarios comprised an empty cell and cells partially or completely filled with bentonite. The temperature was measured inside the buffers and on the inner surface of their surrounding cells, which were artificially heated. The time required for the entire system to reach 100℃ was approximately 40% faster with no gap between the inner cell surface and the bentonite. This suggests that rock-buffer spaces should be filled in practice to ensure the rapid dissipation of heat from the buffer materials to their surroundings. However, it can be advantageous to retain buffer-canister gaps to lower the peak buffer temperature.

• 한국응용약물학회:학술대회논문집
• /
• 한국응용약물학회 1993년도 제1회 추계심포지움 and 제2회 생리분자과학연구센터워크숍
• /
• pp.28-33
• /
• 1993

Regulation of nerve growth factor (NGF)-induced neuronal differentiation by GTPase activating protein(GAP) and its mechanism were investigated in rat pheochromocytoma cell line, PCl2. Overexpression of GAP caused the delay in the onset of neurite outgrowth of PCl2 eel Is in response to NGF. GAP has been known to inhibit p21$\^$ras/, the activated form of which induces neuronal differentiation. Therefore, the activity of p21$\^$ras/ was compared in control cells and cells overexpressing GAP indirectly by measuring the activities of B-Raf and MAP kinase that are known to be positively regulated by p21$\^$ras/. Surprisingly, NGF-induced activities of these two proteins were the same in control eells and GAP-overexpressing cells. Activities of Trk, PLC-r and SMC that act at a site upstream to p21$\^$ras/ in NGF signal transduction pathway were not also affected by GAP overexpression. Interestingly, however, the extent of tyrosine phosphorylation of SNT was found to be remarkably low in cells overexpressing GAP. It has been shown previously that neurotrophins and not mitogens induce SNT tyrosine phosphorylation in PCl2 cells. Thus it is possible that the timing of NGF-induced neuronal differntiation may be in part regulated by SNT and the slower onset of neurite outgrowth in cells overexpressing GAP may be through the inhibition of SNT by GAP.

• Bulletin of the Korean Chemical Society
• /
• 제34권9호
• /
• pp.2835-2838
• /
• 2013

• Journal of Information Display
• /
• 제5권3호
• /
• pp.14-17
• /
• 2004

We have developed a new type of transflective liquid crystal display (LCD) with a single cell gap and a single LC mode. In our transflective configuration, a single LC mode of a 60$^{\circ}$ twisted nematic LC was used for both transmissive and reflective applications. The measured electro-optic characteristics of our transflective LC cell agree well with numerical simulation results. Moreover, the transmittance was found to show similar behavior to the reflectance.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 춘계학술대회 논문집 디스플레이 광소자 분야
• /
• pp.121-123
• /
• 2002

Fast response characteristics of twisted nematic liquid crystal display (TN-LCD) cell with different nematic liquid crystals (NLCs) and cell gap on a rubbed polyimide (PI) surface were studied. High transmittance and fast response time of the TN-LCD on the rubbed PI surface were achieved by using high birefringence ($\Delta$ n) and low cell gap. It is considered that the transmittance and response time of the TN-LCD on the rubbed PI surface decreased as $\Delta$ nd decrease.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.89-90
• /
• 2008

본 논문에서는 전압과 마찰전기에 의하여 전하를 가진 대전입자가 운동을 기반으로 이미지를 구현하는 대전입자형 디스플레이의 패널을 셀과 전극이 형성된 상판과 하판으로 제작하였으며, 각 패널은 격벽높이를 다르게 하여 대전입자층을 여러 층으로 addressing하여 spacer로 cell gap에 변화를 두어 합착하였다. 합착한 패널에 낮은 전압부터 인가하여 threshold voltage와 driving voltage, breakdown voltage를 확인하여 선명한 이미지 구현을 할 수 있었다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2007년도 하계학술대회 논문집
• /
• pp.163-165
• /
• 2007

Generally, the power management system of fuel cell hybrid vehicle (FCHV) requires a unidirectional DC/DC converter for the fuel cell (FC) and a bidirectional DC/DC converter for the battery. To manage the various power flows between these modules with a simple way, a new band-gap reference voltage (BGRV) control strategy is proposed. The proposed method easily controls this variable power flow by setting the reference voltages of each converter to slightly different values, and it can be simply implemented by commercial controllers as well. The operational principle of proposed method is presented and verified experimentally by the 400W prototype.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.53-54
• /
• 2007

Charged particle type display using particles which have opposite charge and color is based on effect of reversible optical property due to electric field. we designed mask pattern for fabrication of the charged particle type display based on glass substrate and investigated cell gap dependent of driving voltage and selectively driving method. the panel driven by our selectively driving method, we could obtain image which had vary little crosstalk caused by electrical interference and conform the last image maintained by memory effect without additional voltage.