• Journal of the Korean Wood Science and Technology
• /
• 제38권2호
• /
• pp.85-93
• /
• 2010

Japanese cedar has low density and poor mechanical performance. Manufacturing glue-laminated timber (glulam) is the best way to compensate for its poor mechanical performance. The Korean Standard (KS) confines outermost lamina of glulam to higher grade than E8, but the yield of higher than grade E8 from logs is only 6.5%. Therefore, the aim of this study is to investigate the possibility of non-Korean-Standard glulam in structural applications. Allowable stresses determined by both hand-calculation and Monte-Carlo simulation show a higher allowable stress than that of the KS-standard glulam of 6S-22B. In the Korean Standard (KS), knot characteristics are not taken into account. Japanese cedar has relatively small knots. We believe that the small knots in Japanese cedar contribute to a higher allowable stress than the KS-standard glulam would predict. The species classification of KS is required to be further subdivided into sub-species groups based on knot characteristics.

• Journal of the Korean Wood Science and Technology
• /
• 제37권3호
• /
• pp.184-191
• /
• 2009

삼나무 원목은 제주도를 중심으로 점차 생산량이 증가하고 있으나, 옹이 등의 결함으로 인하여 목재자원으로서의 가치가 낮게 평가되고 있다. 본 연구에서는 삼나무에 대한 고부가가치의 새로운 용도 창출을 목적으로 구조용 집성재 이용 가능성을 확인하였다. 먼저 삼나무 제재목의 기계응력등급을 조사한 결과 국내의 다른 주요 침엽수종에 비해서는 다소 불량하지만 KS에 적합한 집성재 적층 구성에는 무리가 없는 것으로 확인되었다. 또한 집성재 제조에 필수적인 접착성 및 접착내구성에 있어서도 우수한 성능을 나타내었다. 그러나 집성재의 구조 성능을 평가한 결과, 휨 탄성계수가 KS의 기준에 다소 미달하는 결과를 나타내어 집성재의 강성 보강을 위한 추가적인 검토가 요구되었다.

• 한국가구학회지
• /
• 제22권1호
• /
• pp.18-25
• /
• 2011

This experiment was carried out to investigate the effects of nail diameter, driving distance from end on the nail check length, and the effects of nail diameter, prehole for nail driving, and nail driving slope on the nail withdrawal resistance, by the static test of universal testing machine. The test specimen were Japanese cedar (Cryptomeria japonica D. Don.) boards grown in southern district of Korea, and the nails for test were 2.02～4.82 mm in diameter. After nail driving, the back face checks of test boards were longer than the surface checks. The optimum nail diameter without checks or loss of nail withdrawal resistance were below 10% of board width and the optimum driving distance from end of boards were ten multiple of nail diameter. The relation between nail diameter (x) and withdrawal resistance (y) was linear and the regression formulae for Japanese cedar board was y = 8.66x + 7.6 ($R^2=0.978$). As both of the prehole diameter and driving slope were increased, the withdrawal resistances were significantly decreased.

• The Korean Journal of Ecology
• /
• 제25권1호
• /
• pp.29-31
• /
• 2002

The purpose of this study is to estimate height growth patterns and site index cuties (base index age 50 years) for Japanese red cedar trees(Cryptomeria japonica D. Don) grown in southern regions of Korea. The Chapman-Richards growth function was selected for stand height prediction using on the results of stem analysis data sets. Anamorphic base age invariant site index cuties were presented based on this height prediction equation. The resulting site index prediction equation can provide an indication of the productivity of the site quality based on Japanese red cedar trees plantation ages planted in southern regions of Korea.

• Food Science and Biotechnology
• /
• 제14권5호
• /
• pp.689-693
• /
• 2005

Different masking materials were evaluated for their ability to ameliorate odor of model poultry manure solution by assessing their effects on sensory pleasantness and odor intensity. Results indicated extracts from Eastern red cedar leaves, Loblolly pine needles', and commercial masking agents such as pine extract and odor neutralizer were effective (p<0.05) for masking odor of model poultry manure solution by increasing (p<0.05) pleasantness (82 and 86% increases in pleasantness using red cedar and pine needle extracts, respectively) and decreasing (p<0.05) odor intensity (odor intensity reduction by 66 and 76% using red cedar pine needle extract). The most odor-active compound in Loblolly pine needle extract was ${\alpha}$-terpineol (1,573.8 ug/g) which is responsible for aroma of pine trees (piney) and effective for ameliorating agricultural odors.

• Asian-Australasian Journal of Animal Sciences
• /
• 제16권5호
• /
• pp.764-772
• /
• 2003

Two genetic constructs used to confer improved agronomic characteristics, namely herbicide tolerance (HT) in maize and soyabean and insect resistance (Bt) in maize, are considered in respect of feeding to farm livestock, animal performance and the nutritional value and safety of animal products. A review of nucleic acid (DNA) and protein digestion in farm livestock concludes that the frequency of intact transgenic DNA and proteins of GM and non-GM crops being absorbed is minimal/non existent, although there is some evidence of the presence of short fragments of rubisco DNA of non-GM soya in animal tissues. It has been established that feed processing (especially heat) prior to feeding causes significant disruption of plant DNA. Studies with ruminant and non-ruminant farm livestock offered GM feeds demonstrated that animal performance and product composition are unaffected and that there is no evidence of transgenic DNA or proteins of current GM in the products of animals consuming such feeds. On this evidence, current HT and Bt constructs represent no threat to the health of animals, or humans consuming the products of such animals. However as new GM constructs become available it will be necessary to subject these to rigorous evaluation.

• KIEAE Journal
• /
• 제9권1호
• /
• pp.47-53
• /
• 2009

To know the effect of smells from eco-friend and existing interior construction materials to human response, EEG of subjects' were measured. EEG signals were measured from 8 electrodes according to the international 10-20 system (Fp1, Fp2, F3, F4, Fc3, Fc4, P3, P4) from 10 healthy subjects in seven odor construction material. Followings are results. When stimuli of smell were suggested, non-stimuli pattern of ${\alpha}$-wave is largely in right occipitallobe part and rare in frontallobe part respectively. In case of eco-friend materials' smell, there is a activation of EEG in right occipitallobe part for every stimuli. But in case of eco-friend paint and Hwang-to, ${\alpha}$-wave is appeared in most part of brain even in frontallobe part. Especially for wet cedar case, activation of brain is very positive in right occipitallobe part and in frontallobe part. When comparing the normalized sensitivity of ${\beta}$-wave which appears in negative response, the preference ratio order is like this. Normal paint ${\rightarrow}$ MDF ${\rightarrow}$ Eco-friend paint ${\rightarrow}$ Gypsum board ${\rightarrow}$ Cedar ${\rightarrow}$ Wet cedar ${\rightarrow}$ Hwang-to.

• Journal of the Korean Wood Science and Technology
• /
• 제41권2호
• /
• pp.141-148
• /
• 2013

The goal of this study was to find the optimum lamina size from red pine (Pinus densiflora) and Japanese cedar (Cryptomeria japonica) logs for the cross laminated timber (CLT) production. From visual inspection of the logs from two species, red pine log showed a larger knot and warp compared to the Japanese cedar. Different cross-sectional sizes of lamina ($110mm{\times}30mm$, $110mm{\times}40mm$, $110mm{\times}50mm$, $50mm{\times}30mm$, $30mm{\times}30mm$) from two species were analyzed for yield and grade. Regardless of the species, the optimized cross sectional size for maximizing the yield was $110mm{\times}30mm$. In grading for the different size laminas from Japanese cedar and red pine, a higher percentage of the first and second grade was found from the $110mm{\times}30mm$ lamina cut.

• 한국균학회소식:학술대회논문집
• /
• 한국균학회 2006년도 추계학술대회 및 정기총회
• /
• pp.10-12
• /
• 2006

• 한국가구학회지
• /
• 제16권1호
• /
• pp.1-8
• /
• 2005

This experiment was carried out to investigate the gluing characteristics of poly vinyl acetate emulsion adhesive(PVAc) on the Cryptomeria japonica laminated boards. This sample trees are major planting species and have been planted in southern district for a long time. The optimum gluing conditions for laminated board were summarized as follows; the amount of spreading glue, assembly time, clamping pressure, and clamping time for PVAc resin were $200g/m^2$, 10min., $5kg/cm^2$, and 6hrs., respectively, and the relative formulae between extension ratio(x) and block shear strength(y) was $y=-9.6x+85.2(R^2=0.95)$.