• Journal of Korean Society of Forest Science
• /
• v.89 no.1
• /
• pp.77-84
• /
• 2000

In order to understand the chemical binding forms of Cd in terms of its binding strength in wood, the radial distribution of it through dendroanalysis and its different chemical fractions in trunk wood of mature red pine(Pinus densiflora L.) trees grown in a relatively unpolluted area, in Kangwon-Province, were examined. Total Cd concentration in stem wood was determined by dry digestion and $H_2O$ and 0.01 M solutions of citric acid, malic acid, $CaCl_2$, $MgCl_2$, $Na_2EDTA$ were used as extracting solutions for Cd. Extracting efficiencies of applied solutions were expressed as % of Cd concentration extracted by $Na_2EDTA$ which extracted all Cd instead of Cd total concentration. Total concentration of Cd decreased from the innermost rings near pith towards the the outermost rings near cambium. Especially through the transition zone this tendency was observed clearly. $H_2O$ was the least effective extractant of Cd, then extracting efficiency increased in the order $MgCl_2$ < $CaCl_2$ $Na_2EDTA$ (extracted all Cd). According to the radial position, extracting efficiency of Cd was ranging from 7 to 30% by $H_2O$ and even from 60 to 95% by citric acid. The Cd extracting efficiencies of $H_2O$ and organic acids increased continuously from the stem center to outermost annual rings, whereas salts showed somewhat different tendency, suddenly decreasing near the outermost ring. The results are discussed with regard to the different chemical binding forms of Cd and the mobility of Cd in wood and comparable with ones in previous studies on Pinus sylvestris and Quercus patraea. According to the results, usefulness of radial distribution pattern of Cd in pine tree trunks for retrosective biomonitoring is questioned.

• Analytical Science and Technology
• /
• v.12 no.1
• /
• pp.53-60
• /
• 1999

Dissolution properties for the 6 inorganic pollutants (As, Cd, Cu, Pb, Zn, Cr) in soils have been studied. These 6 inorganic pollutants were spiked to 3 kinds of fresh soils which were sand, clay, and loam. The dissolution properties of the prepared samples were investigated under the various extracting conditions such as extracting time, acid concentration, particle size, etc. in order to obtain basic information about the process of extraction test and improvement of related analytical methods. As the results, dissolution properties were affected mainly by acid concentration in extracting procedure and mineral composition of soils. On the other hand, extracting time, sort of acids and particle size of soils had a little influence on the dissolution properties. Cd revealed very high dissolving efficiency and As was very low in whole extracting test.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.8
• /
• pp.787-798
• /
• 2005

The objectives of this study were to assess extraction kinetics of heavy metals with extraction times and to assess extraction efficiencies of heavy metals with concentrations and kinds of washing solutions. Target materials were obtained from disused metal mines. Washing solutions were water, HCl(0.1, 0.3, 1.0 N), EDTA(0.01, 0.05, 0.1 M), and sodium dodecyl sulfate(SDS, 0.1. 0.5, 1.0%). Extraction efficiencies of heavy metals by water and SDS were below 1%, and extraction efficiencies of Zn and Cd were higher than those of Pb and Cu. As results, water and SDS were not effective in extracting heavy metals from mine tailings as washing solution, but extraction efficiencies of Pb and Cu with SDS solution increased as extraction time increased. Extraction kinetics of heavy metals with HCl and EDTA were faster than those with water and SDS. The majority of heavy metals were extracted within 6 hours, and extraction kinetics was almost independent of the solution concentration. Extraction kinetics of heavy metals after 6 hours was slow, but extraction kinetics was dependent on the solution concentration. Also, as concentrations of HCl and EDTA solution were stronger, heavy metals were extracted rapidly and extraction efficiencies were increased. The extraction efficiency was high in order of Cd>Pb>Zn>Cu in using 1.0 N HCl, and Pb>Cd>Zn>Cu in using 0.1 M EDTA. Consequently, extraction effectiveness was highest for Pb in using HCl, and for Pb and Cd in using EDTA with concentration increase. Extraction time of over 6 hours was not effective in extracting heavy metals.

• Hwankyungkyoyuk
• /
• v.2 no.1
• /
• pp.92-99
• /
• 1991

According to our secondary school curriculum for natural science and technical circles, there be used 353 of chemical reagents including 24 kinds of harmful and toxicant components. At present, most school are discharging their school laboratory waste water without any chemical and physical treatments. So as to solve the environmental problem for water pollution, this study tried to research a kind of adsorbant utilizing saw dust, wasted wood sources and designed the simple processing system using the adsorbent. This adsorbent was made by extracting lignin substances from raw saw dust under the solution of 0.5N-NaOH at the temperature of $100^{\circ}C$. Their metal removed rates was measured not only by processing of column and vessel. but also by comparing the standard solution and real waste water. The results were proved as more than 90(%) of the adsorptive efficiency on the average from Pb, Cd, Cu except Cr(VI)in case of the school experimental waste water soaked in vessels a long with 4g of the adsorbent for 24 hours. The new processing system enables to remove most harmful and toxicant metals by filtering, sedimenting and adsorbing at the low cost.

• Smart Structures and Systems
• /
• v.16 no.2
• /
• pp.243-262
• /
• 2015

Optimal sensor placement (OSP) is a critical issue in construction and implementation of a sophisticated structural health monitoring (SHM) system. The uncertainties in the identified structural parameters based on the measured data may dramatically reduce the reliability of the condition evaluation results. In this paper, the information entropy, which provides an uncertainty metric for the identified structural parameters, is adopted as the performance measure for a sensor configuration, and the OSP problem is formulated as the multi-objective optimization problem of extracting the Pareto optimal sensor configurations that simultaneously minimize the appropriately defined information entropy indices. The nondirective movement glowworm swarm optimization (NMGSO) algorithm (based on the basic glowworm swarm optimization (GSO) algorithm) is proposed for identifying the effective Pareto optimal sensor configurations. The one-dimensional binary coding system is introduced to code the glowworms instead of the real vector coding method. The Hamming distance is employed to describe the divergence of different glowworms. The luciferin level of the glowworm is defined as a function of the rank value (RV) and the crowding distance (CD), which are deduced by non-dominated sorting. In addition, nondirective movement is developed to relocate the glowworms. A numerical simulation of a long-span suspension bridge is performed to demonstrate the effectiveness of the NMGSO algorithm. The results indicate that the NMGSO algorithm is capable of capturing the Pareto optimal sensor configurations with high accuracy and efficiency.