• Radiation Oncology Journal
• /
• 제7권1호
• /
• pp.113-121
• /
• 1989

The inclusion of air filled cavities in treatment fields creates a potential dosimetric problem due to the rebuildup phenomenon near the air-tissue interface using a simulated phantom, such as air gap, air cylinder, and air cavity, the amount of rebuldup along the various field sizes and air cavity dimensions was measured. The results are as follows. 1. As the field size becomes larger in comparison with the cavity size, or as the cavity size gets bigger when the field size is equal to the cavity size, rebuildup decreases. 2. When the distance between the phantom surface and the air cavity is less than 1.5cm, there is prominent rebuildup. And when the distance is more than 1.5cm, rebuildup is relatively constant, 3. The change according to the depth of the cavity is affected by the field size and the cavity size, rebuildup usually increases when the depth of the cavity increases. 4. It is suggested that tissue equivalent material should be applied on the skin to make tissue thickness over the air cavity more than 1.5cm and that the field size should include the air cavity with at least 1cm margin.

• 한국도로학회논문집
• /
• 제20권1호
• /
• pp.19-25
• /
• 2018

PURPOSES : The purpose of this study is to identify the road-subsidence mechanism in unsaturated sandy soils. METHODS : A series of soil chamber tests were conducted under various conditions. RESULTS : The cavity-expansion characteristics in unsaturated sandy soils due to seepage were affected by the outlet size, seepage intensity, relative density, and fine content. CONCLUSIONS : In unsaturated sandy soils, the cavity-expansion speed was affected by the outlet size, relative density, seepage intensity, and clay content; however, the cavity-expansion shape was very similar. As the outlet size and seepage intensity increased, the cavity-expansion speed increased. As the relative density increased, the cavity-expansion speed increased because of a sudden decrease in shear strength, resulting from the increased saturation (reduction of matric suction). The cavity expanded faster with the increasing clay content, up to a certain threshold. It expanded at a slower rate once it passed the threshold. Finally, it reached a stable state where the cavity did not expand due to seepage.

• 전기의세계
• /
• 제28권4호
• /
• pp.47-52
• /
• 1979

Total number of resonant modes in a microwave oven cavity may be maximized for a given frequency bandwidth to obtain more uniform power distribution by choosing proper size of the cavity. The total number of modes is calculated for a dielectrically loaded rectangular cavity and its size is suggested here for which the change in the number of modes is less sensitive to the change of dielectric layer thickness and its total number of modes is maximized in a given range of cavity sizes. A prove coupled rectangular cavity is constructed and the total existing modes are measured to see the change of modes depending on the dielectric layer thickness and the cavity size. Surface wave mode existing in the dielectric layer is confirmed by measuring Q and the input impedance of the cavity for this mode, which closely compares with the calculation.

• 대한기계학회논문집A
• /
• 제25권1호
• /
• pp.11-15
• /
• 2001

We present the design and strength evaluation of an anodically bonded pressurized cavity array, based on the energy release rate measured from the anodically bonded plates of two dissimilar materials. From a theoretical analysis, a simple fracture mechanics model of the pressurized cavity array has been developed. The energy release rate (ERR) of the bonded cavity with an infinite bonding length has been derived in terms of cavity pressure, cavity size, bonding length, plate size and material properties. The ERR with a finite bonding length has been evaluated from the finite element analysis performed for varying cavity and plate sizes. It is found that, for an inter-cavity bonding length greater than the half of the cavity length, the bonding strength of cavity array approaches to that of the infinite plate. For a shorter bonding length, however, the bonding strength of the cavity array is monotonically decreased with the ratio of the bonding length to the cavity length. The critical ERR of 6.21J/㎡ has been measured from anodically bonded silicon-glass plates. A set of critical pressure curves has been generated for varying cavity array sizes, and a design method of the pressurized cavity array has been developed for the failure-free wafer-level packaging of MEMS devices.

• 터널과지하공간
• /
• 제3권2호
• /
• pp.109-117
• /
• 1993

The existence and exact location of cavity is very important for the stability of the large underground storage house or building. Numerical method such as finite element method and finite diference methods are widely used because of model's complexity. Preliminary tests such as calculation step test, mesh size test and model size test were tried. Upper shadow zone and lower shadow zone can be calculated from 50% amplitude level of measuring data. From these statistical methods, the calculatied position of cavity coincided nearly with actual position of model testing cavity.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2007년도 제29회 추계학술대회논문집
• /
• pp.93-98
• /
• 2007

스크램제트의 연소실 내부로 유입되는 공기의 속도는 초음속으로 체류 시간은 수 ms로 매우 짧다. 이 짧은 시간 안에 연료분사, 공기-연료 혼합, 연소과정이 모두 이루어져야 한다. 공기와 연료의 혼합을 증대하는 방법은 여러 가지가 제시되었다. 이중 자유류 마하수 2.5의 단일 수직 분사 방법에서의 Cavity를 이용한 혼합 특성올 알아보기 위해 수치해석을 수행하였다. 사용된 코드는 동일조건의 실험결과와 비교하여 검증하였고 이를 통해 Cavity의 크기에 의한 혼합증대를 확인할 수 있었다.

• 한국안전학회지
• /
• 제15권2호
• /
• pp.111-117
• /
• 2000

In this study, the bearing capacity behavior of strip footing located above a continuous cavity in sand was investigated experimentally. The model footing test was performed in a model box made by using raining method in sand. The model footing test results were compared with those obtained from theoretically proposed equations. The results of the analysis indicate that there is a critical region under the footing. For strip footing, there exists a critical depth below which the presence of the cavity has negligible influence on the footing performance. Only when the cavity is located within this region will the footing performance be significantly affected by the presence of the cavity. The size of the critical region depends on several factors such as footing shape, soil property, cavity size and cavity shape. When the cavity is located within the critical region, the bearing capacity of the footing varies with various factors, such as the size and location of the cavity and the depth of foundation. Based on the experimental study, the following conclusions were induced. 1. The ultimate bearing capacity due to the eccentricity of a underground cavity increases at the rate of the small rather than that due to the depth of a underground cavity. This indicates that the bearing capacity of a strip footing is influenced on the depth rather than the eccentricity of a underground cavity. 2. The critical $depth(D/B)_{cr}$, by underground cavity in sand soil ground that is made by the relative density($D_r$)=55%, 65%, 75%, approaches a range of about 8~10 in case of W/B=1, and about 11~13 in case of W/B=2. 3. In case of the relative density($D_r$) 75%, the most outstanding differential settlement trend is shown in the depth of 4~8cm regardless of the size of cavity, namely, when the value of D/B is 1~2. Therefore, a underground cavity influences on not only the decrease of the bearing capacity but also the differential settlement of a strip footing.

• 한국재난정보학회 논문집
• /
• 제18권2호
• /
• pp.261-268
• /
• 2022

연구목적: 지표투과레이더 탐사에 의해 발견된 공동의 경우, 정확히 예측된 공동의 체적에 상응하도록 주입재를 충분히 채우고 강도를 발휘하게 함으로써 안정성을 확보하여 지반함몰을 예방하여야 한다. 연구방법: 지표투과레이더 탐사에 의한 공동파형 분석 방법과 공동형상 촬영장비를 이용한 방법을 바탕으로, 공동의 규모와 형상이 불규칙한 실제 공동을 실측하여 긴급복구시 주입재의 공동채움량을 산정하였다. 연구결과: 지표투과레이더 탐사에 의한 방법과 공동형상화 장비를 활용한 공동 규모 산정을 통하여 공동규모 및 토피에 따른 주입재 채움량과의 상관관계를 분석하여 예상 채움량을 제시하였다. 결론: 공동형상화 장비에 의해 실측된 공동체적은 지표투과레이더 탐사에 의한 공동 체적의 20% ~ 40% 범위로 나타났다. 또한, GPR탐사에 의해 예측된 공동규모 대비 주입재 채움량은 약 60% ~ 140% 범위였으며, 공동 형상화 장비에 의한 공동규모 대비 주입재 채움량은 약 260% ~ 320%로 확인되었다.

• 한국지반환경공학회 논문집
• /
• 제7권3호
• /
• pp.69-76
• /
• 2006

본 연구는 모래지반에서 공동위에 위치한 연속기초의 지지력거동을 연구하기 위하여 강사법으로 조성된 모래지반에서 모형실험을 수행하였다. 모형실험결과와 이론식을 비교하여 지하공동이 연속기초의 지지력에 영향을 미치는 한계범위를 도출하였다. 한계범위의 크기는 기초의 형상, 지반특성, 공동크기, 공동형상 등 여러 가지 인자에 의존한다. 지하공동의 깊이가 편심거리보다 극한지지력에 더 큰 영향을 주는 것으로 나타났다. 또한 연속기초에 미치는 지하공동의 영향은 편심거리에 따른 지지력 감소현상 뿐만 아니라 연속기초의 부등침하 현상에도 큰 영향을 줄 것으로 판단되었다.

• 한국재난정보학회 논문집
• /
• 제18권1호
• /
• pp.218-227
• /
• 2022

연구목적: 본 연구의 목적은 메타버스 내 일어나고 있는 범죄유형을 살펴보고, 이에 대한 경찰의 치안전략 수립과 형사사법 기관의 범죄예방 및 법적제재 방안을 강구하기 위함이다. 연구방법: 메타버스 내 범죄유형 분류를 위해 선행연구 조사결과와 현재 발생하고 있는 사건사례 등을 통하여 범죄유형을 분석하였다. 연구결과: 메타버스 내 일어나고 있는 범죄는 대부분 로블록스나 제페토 등 게임 내에서 이루어지는 경우가 많다. 게임 이용자들은 10대가 대부분을 차지하고 있다. 유형별로 보면 성범죄나 폭력범죄, 명예훼손 등은 10대들이 많지만, 저작권침해 및 가상화페를 이용한 자금세탁이나 사기 등에 대해서는 전문가들이 포함되어 있는 것으로 파악되었다. 결론: 메타버스 내 범죄유형의 다양화로 인한 피해사례가 발생함에 따라 경찰의 치안전략 수립과 법적 제재와 법개정을 할 수 있는 제도적 보완장치가 마련되어야 할 것이다.