• Textile Coloration and Finishing
• /
• v.4 no.2
• /
• pp.69-75
• /
• 1992

This study was carried out to compare the effect of caustic soda with the effect of caustic potash on cotton fabric. Instead of caustic potash, sodium carbonate similar in chemical composition to caustic potash was used. The damage of cotton cellulose by repeated washing in various alkaline solutions at 8$0^{\circ}C$, 60 rpm was examined. The damage of cotton cellulose by the variation of copper number, carboxyl content, degree of polymerization and retained tensile strength was estimated. The results obtained at this study are as follows; 1. The damage of cotton by caustic soda was severer than caustic potash. The retained tensile strength at 50 washing cycle in caustic soda was 59% and in sodium carbonate was 80%. 2. By adding soap to caustic soda, the damage of cotton fabric decreased because contact area between fabric and air diminished by foam. 3. Detergency of EMPA 101 in caustic soda was lower than sodium carbonate. Consequently, using caustic soda that damage fabric severely and have lower detergency for caustic potash is unreasonable.

• Korean Journal of Food Science and Technology
• /
• v.33 no.2
• /
• pp.205-208
• /
• 2001

The bitterness of brewers yeast slurry decreased by washing with mild caustic soda solution followed by washing with 0.85% (w/v) NaCl solution The higher concentration of caustic soda was, the lower the bitterness unit(BU) of washed yeast slurry was. The lethal rate of yeast cells increased. When the concentration of caustic soda solution increased from 0.05%(w/v) to 0.25%(w/v), the BU of brewers yeast slurry was decreased from 45 to 3, but yeast cells viability decreased from 93% to 0%. The optimum washing conditions of brewers yeast slurry were as follows: the concentration of caustic soda solution was $0.07{\sim}0.1%$(w/v) and the contact time of brewers yeast slurry with caustic soda was $10{\sim}20$ minutes. The similar washing effect was obtained when the brewers yeast slurry was washed with 20%(v/v) ethanol solution.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.47 no.5
• /
• pp.394-397
• /
• 2021

Sodium hydroxide or caustic soda is a corrosive agent that can cause extensive damage to the oral mucosa, lips, and tongue when ingested either accidentally or intentionally. These injuries include microstomia, shallow vestibule, ankyloglossia, speech impairment, loss of teeth and impairment in facial expression. In the present article, we report a unique case of tongue adhesion to the mouth floor and its surgical management in a 66-year-old female patient, who had a history of caustic soda ingestion.

• Membrane Journal
• /
• v.27 no.1
• /
• pp.104-107
• /
• 2017

Among many methods in solving the organic contamination in the reverse osmosis operation, caustic soda (NaOH) wash method is efficient and commercially affordable. In continuation of our many organic pollution removal works, this study focused mainly on caustic soda wash with micro-bubble to removal the organic contamination of the spent membrane from reverse osmosis process. First, the membrane was forced the pollute using known organic pollutants such as Humic acid, Bovine serum albumin, Sodium alginate drug. The organic contamination on the membrane was monitored flux. The decontamination of organic contaminants was derived flux variation at individual caustic soda was injected micro-bubble methods and combined method as well. the found results explain removal of organic contaminants effective only by combined caustic soda wash with micro-bubble methods.

• Applied Chemistry for Engineering
• /
• v.3 no.3
• /
• pp.440-450
• /
• 1992

Three type extraction processes of rare earth metal component from rare earth metal bearing ore were sulfuric acid digestion, caustic soda leaching and decomposition with $(NH_4)_2SO_4$. From the overall results, both caustic soda leaching and sulfuric acrid digestion were better extraction processes for domestic monazite ore. The proper conditions of sulfuric acid digestion for domestic monazite ore were reaction temperature $210^{\circ}C$, reaction time 40 min, weight ratio of $H_2SO_4$ to monazite ore 1.5 and concentration of $H_2SO_4$ 95%. Under these conditions, 98% of rare earth metal component was extracted and also the reasonable conditions for caustic soda leaching were reaction temperature $140^{\circ}C$, weight ratio of NaOH to monazite 3.0, concentration of caustic soda solution 50% and leaching time 3hrs. Under these conditions, 97% of rare earth metal component was extracted.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.29 no.3
• /
• pp.34-42
• /
• 1997

This study was carried out to investigate the proper cooking conditions of soda-anthraquinone and alkaline sulfite-anthraquinone pulping of rice-straw, and get basic data f9r the use of rice-straw chemical pulp through the test of characteristics and physical properties of pulps made in the various cooking conditions From the experimental results , we can conclude as follows. In the soda-anthraquinone pulping of rice-straw, the optimum cooking conditions were 60 min. at $150^{\circ}C$ in the amount of caustic soda of 20% with the addition of anthraquinone(0.05%). And total yield, Kappa No. and brightness of pulp made in the condition above mentioned were 41.9%, 7.7 and 51.1 respectively. In the alkaline sulfite-anthraquinone pulping of rice-straw, the proper mixing ratio of cooking chemical(caustic soda : sodium sulfite) was 50:50. And the optimum cooking conditions were 60 min. at $150^{\circ}C$ in the amount of cooking chemical of 20% with the addition of anthraquinone(0.05%). At that time, the total yield, Kappa No, and brightness of pulp were 50.1%, 9.1 and 40.2 respectively. As a result, the alkaline sulfite-anthraquinone pulping was superior to the soda-anthraquinone pulping in the aspect of yield, but inferior in the viewpoints of Kappa No. and brightness. For the comparison of qualities of pulps made in the various cooking methods and conditions, the physical properties of four sorts of pulps were tested. As a result, soda-anthraquinone pulps were superior to alkaline sulfite-anthraquinone pulps in the various strengths excluding tear strength and brightness. On the other hand, pulps made in the condition of addition of cooking chemical of 20% were superior to pulps in the dosage of 15% in the aspects of all the strengths and brightness.

• Solar Energy
• /
• v.8 no.1
• /
• pp.49-56
• /
• 1988

Thermally treated Korean ilmenite was characterized and used for water splitting to obtain hydrogen by photo-catalytic reaction. Experiments on specific surface area, X-ray diffraction and EDS showed that the formation of FeO, $Fe_2O_3$ and $TiO_2$ ilmenite crystal surface increased the specific surface area with maximum value, phase change of $TiO_2$ at $600^{\circ}C$ and hetrogeneity. The hydrogen evolved in caustic soda solution on these ilmenites indicated that there was a maximum yield point at about $600^{\circ}C$. This point was explained with the change of the surface area due to sintering of newly formed FeO, $Fe_2O_3$ and $TiO_2$, as well as crystal phase change of anatase to rutile at $600^{\circ}C$. Produced hydrogen increased also as the concentration of caustic soda, but become constant at the near 1N solution.

• Proceedings of the Membrane Society of Korea Conference
• /
• 2003.05a
• /
• pp.101-105
• /
• 2003

• Proceedings of the Korean Fiber Society Conference
• /
• 1999.10a
• /
• pp.291-294
• /
• 1999

• Journal of Sensor Science and Technology
• /
• v.3 no.3
• /
• pp.28-35
• /
• 1994

Caustic Soda Treatment Systems need a concentration measurement device in order to monitor the weight reduction amount of polyester fabrics. Since the reduction process requires several concentration measurements, we have to do the unit titration fast and exactly. Therefore, a proposition of estimation algorithm for finding the equivalent point in the titration process is needed. In this paper, we used the cardinal spline algorithm, to estimate the proper curve with the measured pH-values after each injection of titration sdution, to predict the equivalent point. While the processing time is elapsed, several equivalent points are estimated and drawed the line graph of fabrics weight reduction automatically. Finally, we designed the hardware and the software of an automatic titration system that can generate the reduction ending signal of Caustic Soda Treatment System.