• Textile Coloration and Finishing
• /
• v.4 no.2
• /
• pp.69-75
• /
• 1992

This study was carried out to compare the effect of caustic soda with the effect of caustic potash on cotton fabric. Instead of caustic potash, sodium carbonate similar in chemical composition to caustic potash was used. The damage of cotton cellulose by repeated washing in various alkaline solutions at 8$0^{\circ}C$, 60 rpm was examined. The damage of cotton cellulose by the variation of copper number, carboxyl content, degree of polymerization and retained tensile strength was estimated. The results obtained at this study are as follows; 1. The damage of cotton by caustic soda was severer than caustic potash. The retained tensile strength at 50 washing cycle in caustic soda was 59% and in sodium carbonate was 80%. 2. By adding soap to caustic soda, the damage of cotton fabric decreased because contact area between fabric and air diminished by foam. 3. Detergency of EMPA 101 in caustic soda was lower than sodium carbonate. Consequently, using caustic soda that damage fabric severely and have lower detergency for caustic potash is unreasonable.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2009.05b
• /
• pp.53-56
• /
• 2009

This study reviewed the characteristics of concrete made of performance improving mixture materials based on KOH as a means to resolve the problems of initial quality reduction that result in concretes with blast furnace slag powder. Summarizing the results, first as the characteristics of fresh concrete, liquidity was found to reduce in general with increased BS substitution ratio. Objective range of liquidity was not satisfied in all mixes according to the use of performance improving mixture materials. Air capacity was satisfied to the objective range in all mixes. As the characteristics of hardened concrete, while compressive strength showed a decreasing trend with increasing BS substitution ratio at early age, increasing trend was shown by the plain with increasing BS substitution ratio at later age. On the other hand, K1 and K2 were only effective among mixture materials at early age, but K1F30 showed excellent strength at both early and later ages.