• Applied Chemistry for Engineering
• /
• v.31 no.3
• /
• pp.267-276
• /
• 2020

Poly(epichlorohydrin) copolyol series (PECH copolyols) were synthesized via cationic ring-opening copolymerization (ROCP) of oxirane-based monomers and effects of reaction temperature, solvent type, and initiator were studied. As a comonomer, two types of alkylene oxides were used, and polymerization conditions were conducted both with diethylene glycol (DEG) as an initiator in methylene chloride (MC) solvent and tripropylene glycol (TPG) in toluene solvent. In order to induce the active monomer (AM) mechanism in the ring-opening copolymerization reaction, the monomer was injected by an incremental monomer addition (IMA) method using a syringe pump, and the polymerization was performed at -5 ℃. PECH copolyol, a synthesized ephichorohydrin (ECH)-based copolyol, was converted to glycidyl azide-based energy-containing copolyol (GAP copolyol) by azadizing the ECH unit through a substitution reaction. It was confirmed that the synthesized azide copolyol had little effects on changes of the solvent and the initiator. Also, the molecular weight increased 500 after the azide reaction, thereby the GAP copolyol was polymerized as designed. As the content of the comonomer increased, both the T_g and viscosity tended to decrease due to the influence of the alkyl chain length. It is possible to fundamentally prevent CH₃N₃ amount produced in the azide reaction process, and it is expected that a large-scale process could be achievable.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.8 no.1 s.20
• /
• pp.69-80
• /
• 2005

A synthesis of azide-terminated glycidyl azide polymer, GAP-A, was carried out by tosylation and azidation of polyepichlorohydrin(PECH) prepared by cationic ring-opening polymerization. Polyepichlorohydrin was prepared by cationic activated monomer polymerization using ethylene glycol and $BF_3{\cdot}OEt_2$ as an initiator and a catalyst at $\~10^{\circ}C$. Tosylation of polyepichlorohydrin was performed using traditional TsCl/pyridine method and was also carried out using TsCl/amine catalysts to reduce the reaction time significantly. Azidation of tosyl-terminated PECH(OTs-PECH) was performed using $NaN_3$ as an azidation reagent in DMF solvent at high temperature and was unexpectedly completed within 2 hours.

• Applied Chemistry for Engineering
• /
• v.31 no.4
• /
• pp.383-389
• /
• 2020

Mesoporous silica solid catalysts modified with sulfonic acid were prepared for cationic ring-opening polymerization of octamethylcyclotetrasiloxane (D₄). Two sets of MCM-41 (1.7 and 2.8 nm) and SBA-15 (8.1 and 15.9 nm) with different pore sizes were used as catalyst supports. The surface of silica materials was modified with (3-mercaptopropyl)trimethoxysilane by silylation reaction and oxidized to sulfonic acid. The structures of the prepared catalysts were examined by X-ray diffraction and nitrogen adsorption-desorption. The pore size, specific surface area, and pore volume of the modified solid catalysts decreased slightly. In addition, the modification of the sulfonic acid on the silica surface was confirmed by using infrared spectroscopy and nuclear magnetic resonance spectroscopy. To observe the effect of the particle size on the catalytic activity, it was observed with a scanning electron microscope. The catalysts were used to synthesize PDMS through a ring-opening polymerization of D₄, and the conversion and polymerization rate of the polymerization reaction depended on the pore size, specific surface area, particle size, and particle agglomeration of the catalysts. In order for the polymerization rate, the catalyst prepared with SBA-15 of 8.1 nm pore size had the fastest reaction rate and showed the best catalytic activity.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.05a
• /
• pp.221-226
• /
• 2008

Novel synthetic routes were proposed for hydroxy-terminated Poly(EO-co-THF) by Cationic ring-opening copolymerization of Tetrahydrofuran(THF) and Ethylene oxide(EO). It was carried out using Boron trfluoride tetrahydrofuranate($BF_3$ THF complex) as catalyst in the presence of 1,4-butandiol. The resultant products are well-defined linear polyetherpolyol. Polyurethane(TPU) were prepared using resultant polyetherpolyol with IPDI/N-100 as curing agent and TPB(Triphenylbismuth) /MA(Maleic anhydride) mixture as cure catalyst. Mechanical properties of TPU prepared from poly(EO-co-THF) polyol were investigated and compared with polyurethane using ATK HTPE.

• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.356-356
• /
• 2006

The use of renewable feedstock is an important issue to reduce the fossil fuel consumption. In this contribution, we report the cationic ring-opening polymerization of a 2-oxazoline monomer with soybean fatty acid side chains (SoyOx) under microwave irradiation. Kinetic experiments were performed to investigate the livingness of the polymerization in both acetonitrile and in the absence of solvent. In addition, both block and statistical copolymers were prepared using the SoyOx monomer. The synthesized (co)polymers were crosslinked under UV-irradiation resulting in insoluble polymeric materials and core-crosslinked micelles.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.7 no.2 s.17
• /
• pp.109-117
• /
• 2004

We synthesized energetic prepolymer(2-nitrato ethyl oxirane, NEO) for plastic-bonded explosive and measured its thermodynamic parameters. 2-Nitrato ethyl oxirane(NEO) as a monomer was synthesized from 4-butene-ol, the first-step was preparation of 1-nitrate-3-butene and second-step was synthesized 2-nitrate-ethyl oxirane from 1nitrate-3-butene and then polymerized by cationic ring opening polymerization. The unreacted monomer concentration was measured by GC. The thermodynamic parameters were obtained from the ceiling temperature(Tc) values of 1 mole monomer at each reaction temperature. We varied feed rate of monomer, concentration of initiator and monomer to control molecular weight and polydispersity of perpolymer(NEO). Number average molecular weight(Mn), polydispersity(PD), and glass transition temperature(Tg), viscosity of prepolymer(NEO) were 2000, 1.07, $-55^{\circ}C$ and 300 poise respectively.

• Bulletin of the Korean Chemical Society
• /
• v.8 no.2
• /
• pp.96-101
• /
• 1987

2-Ethoxy-6-methoxy-5-cyano-3,4-dihydro-2H-pyran (1_a$), 2-n-butoxy-6-methoxy-5-cyano-3,4-dihydro-2H-pyr an (1b), 2-isobutoxy-6-methoxy-5-cyano-3,4-dihydro-2H-py ran ($1_c$), and 2-ethoxy-6-methoxy-3-methyl-5-cyano-3,4-dihydro -2H-pyran ($1_d$) were prepared by (4 + 2) cycloaddition reaction of methyl $\alpha$-cyanoacrylate with the corresponding alkyl vinyl ethers. Compounds $1_{a-d}$ were ring-open polymerized by cationic catalyst to obtain alternating head-to-head (H-H) copolymers. For comparison, head-to-tail (H-T) copolymer $3_a$ was also prepared by free radical copolymerization of the corresponding monomers. The H-H copolymer exhibited minor differences in its $1_H% NMR and IR spectra, but in the $^{13}C$ NMR spectra significant differences were observed between the H-H and H-T copolymers. Glass transition temperature ($T_g$) of H-H copolymer was higher than that of the H-T copolymer, but thermal decomposition temperature of the H-H copolymer was lower than that of the H-T copolymer. Compounds $1_a$, $a_b$, and $1_c$, copolymerized well with styrene by cationic catalyst, but compound 1d failed to copolymerize with styrene. All of the H-H and H-T copolymers were soluble in common solvents and the inherent viscosities were in the range 0.2-0.4 dl/g.

• Bulletin of the Korean Chemical Society
• /
• v.7 no.5
• /
• pp.372-376
• /
• 1986

Substituted 3,4-dihydro-2H-pyrans ($1_{a-e}$) were prepared by (4 + 2) cycloaddition reaction of dimethyl dicyanofumarate with the corresponding electron-rich olefins. The compounds $1_{a-e}$ were ring-open polymerized by cationic initiators to obtain polymers of 1:1 alternating sequence. Polymerizations were carried out with boron trifluoride etherate in methylene chloride at $-78^{\circ}C$. All the polymers obtained were soluble in common solvents and were reprecipitated by pouring its chloroform solution into diethyl ether. All the compounds $1_{a-e}$ were not as reactive as the corresponding pyrans derived from ${\alpha}$ -cyanoacrylate.

• Bulletin of the Korean Chemical Society
• /
• v.9 no.3
• /
• pp.176-179
• /
• 1988

3-Methoxy-4-cyano-2,9-dioxabicyclo[4.3.0]non-3-e ne (1) was prepared by (4 + 2) cycloaddition reaction of methyl ${\alpha}$-cyanoacrylate with 2,3-dihydrofuran. Compound 1 was ring-open polymerized by cationic catalyst such as boron trifluoride etherate to obtain alternating head-to-head (H-H) copolymer (2) of methyl $\alpha$ -cyanoacrylate and 2,3-dihydrofuran. For comparison, head-to-tail (H-T) copolymer (3) was also prepared by free radical copolymerization of the corresponding monomers. The H-H copolymer exhibited minor differences in its $^1H$-NMR and IR spectra, but in the $^{13}C$-NMR spectra significant differences were observed between the H-H and H-T copolymers. All of the H-H and H-T copolymers were soluble in common solvents and the inherent viscosities were in the range 0.2-0.3 dl/g.

• Bulletin of the Korean Chemical Society
• /
• v.8 no.2
• /
• pp.102-105
• /
• 1987

2-Methoxy-6-methyl-3,4-dihydro-2H-pyran ($1_a$), 2-ethoxy-3,6-dimethyl-3,4-dihydro-2H-pyran ($1_b$), and 2-ethoxy-3-methyl-6-ethyl-3,4-dihydro-2H-pyran ($1_c$) were prepared by (4 + 2) cycloaddition reaction from the corresponding vinyl ketones and alkyl vinyl ethers. Compounds $1_{a-c}$ were ring-open polymerized by cationic catalyst to obtain alternating head-to-head (H-H) copolymers. For comparison, copolymer of head-to-tail (H-T) was also prepared by free radical copolymerization of the mixture of the corresponding monomers. The H-H copolymer exhibited some differences in its $^1H$ NMR and IR spectra. However, significant differences were showed between the H-H and H-T copolymers in the $^{13}C$ NMR spectra. Also noteworthy was that$T_g$ value of H-H copolymer was higher than that of the corresponding H-T structure. Decomposition temperature of the H-H copolymer was lower than that of the H-T copolymer. All the H-H and H-T copolymers were soluble in common solvents.