• Carbon letters
• /
• 제9권4호
• /
• pp.294-297
• /
• 2008

A CNT-$TiO_2$ nano composite was prepared from titanium chloride ($TiCl_4$) via sol-gel process using multi walled carbon nano tube (MWCNT) followed by calcination at $450^{\circ}C$. Spectral analysis revealed that the formed $TiO_2$ resided on the carbon in anatase form. The effect of adsorption was investigated using aqueous solution of methylene blue and procion blue dye. The photochemical reaction of CNT-$TiO_2$ composite in aqueous suspensions was studied under UV illumination in batch process. The reaction was investigated by monitoring the discoloration of the dyes employing UV-Visible spectro-photometeric technique as a function of irradiation time. The catalyst composites were found to be efficient for the photodegradation of the dye.

• Archives of Pharmacal Research
• /
• 제4권2호
• /
• pp.75-84
• /
• 1981

As the cetyltrimenthy ammonium bromide (CTAB) concentration increases to $2{\times}10^{-4}$/M the absorption maximum of ethyl orange (EO) makes a blue shift from 475 mm to 395 mm. At higher concentration of CTAB than $2{\times}10^{-4}$ / M the absorption maximum shifts to higher wavelength than 395 nm. A new peak at 395 nm is shown to result from the mixed micelle due to dye stacking interaction rather than from a change in dye geometry. Because Raman spectra of EO on interaction with varying amount of CTAB are similar to that of EO in water. EO retains trans azo type on interaction with CTAB. There is a change of c.m.c.s. of CTAB for the mixed micelle in the presence of salt. The effect of added salt on C. M. C. of CTAB for the mixed micelle is given that the logarithm of the c. m. c. is a linear function of the logarithm of the sum of the c. m. c. and the concentration of added salt.

• Advances in environmental research
• /
• 제5권1호
• /
• pp.61-77
• /
• 2016

$NanoTiO_2$ was synthesized by ultrasonication assisted sol-gel process and subjected to iron doping and carbon-iron codoping. The synthesized catalysts were characterized by XRD, HR-SEM, EDX, UV-Vis absorption spectroscopy and BET specific surface area analysis. The average crystallite size of pure $TiO_2$ was in the range of 30 - 33 nm, and that of Fe-$TiO_2$ and C-Fe $TiO_2$ was in the range of 7 - 13 nm respectively. The specific surface area of the iron doped and carbon-iron codoped nanoparticles was around $105m^2/g$ and $91m^2/g$ respectively. The coupled semiconductor photo-Fenton's activity of the synthesized catalysts was evaluated by the degradation of a cationic dye (C.I. Basic blue 9) and an anionic dye (C.I. Acid orange 52) with concurrent investigation on the operating variables such as pH, catalyst dosage, oxidant concentration and initial pollutant concentration. The most efficient C-Fe codoped catalyst was found to effectively destruct synthetic dyes and potentially treat real textile effluent achieving 93.4% of COD removal under minimal solar intensity (35-40 kiloLUX). This reveals the practical applicability of the process for the treatment of real wastewater in both high and low insolation regimes.

• BMB Reports
• /
• 제30권3호
• /
• pp.229-233
• /
• 1997

Indolicidin has been known to have a broad spectrum of antimicrobial activities against Gram negative and positive bacteria. Its eight analogues were chemically synthesized. The analogue design was based on the analysis of sequence to elucidate the role of some residues in the antibacterial mechanism of indolicidin. Bactericidal activities were assayed against Escherichia coli and Proteus vulgaris, and the membrane perturbing abilities of the peptides were assayed using a dye containing liposome. Among the eight analogues, $[Gly^4, Gly^6]-Indo,\;[Ile^6,Ile^8]-Indo,\;[Lys^{12}]-Indo$ and $[Thr^2,Tyr^9]-Indo$ showed enhanced antibacterial activities. These results suggest that proline and cationic residues are important in the bactericidal activity of indolicidin. We tried to describe the antimicrobial mechanism of indolicidin with these results.

• 한국염색가공학회지
• /
• 제14권3호
• /
• pp.34-43
• /
• 2002

Abstract-Many studies have been carried out to improve the dyeability of anionic dyes onto cellulosic fibers. Modification of control using cationic compounds has been most widely used. In this study, an effort was made to cationize cotton fabrics using cellulose-reactive allylamine polymer, namely triazinyl N,N'-dimethyl-N,N'-diallyl ammonium chloride in the previous work. The results showed that the dye-uptake of treated cotton fabrics with acid dyes and reactive dyes markedly increased in the various dyeing conditions. In addition, the dyeing rate of cationized cotton was also faster than that of untreated counterpart. Furthermore, the antimicrobial property was also investigated to determine the effects of cationization.

• 대한화학회지
• /
• 제55권2호
• /
• pp.208-217
• /
• 2011

Maghnia montmorillonite clay를 이용하여, 두 가지 염료(neutral red; NR과 malachite green oxalates; MG)에 대한 pH 및 온도 효과를 측정하였다. 수용액 속에서 MG는 pH 3-9에서 흡수가 나타나는 반면에, 양이온 NR은 pH 3-5에서 red shift 흡수피크가 나타났으며, 중성 NR은 pH 8-12에서 흡수피크가 얻어졌다. NR에 대해서는 465.13 mg/g, MG에 대해서는 459.89 mg/g의 최대 흡수 피크가 각각 298와 318 K에서 얻어졌으며, 자유에너지 Ea 값은 각각 4.472-5.559 kJ/mol과 2.000-2.886 kJ/mol로 얻어졌다. 도한, as ${\Delta}H^{\circ}$, ${\Delta}S^{\circ}$, ${\Delta}G^{\circ}$ and Ea과 같은 다양한 열역학적인 변수들을 계산했으며, 전체적인 반응의 흡수과정은 자발적이고, 흡열반응으로 진행됨을 알 수 있었다.

• 대한화학회지
• /
• 제54권1호
• /
• pp.13-22
• /
• 2010

7 diethylaminocoumarin (DEAC) 레이저 염료의 광물리적 특성들을 다양한 용매에서 측정하였다. DEAC의 방출 스펙트럼은 양이온성(CTAC) 미셀과 음이온성(SDS) 미셀에서 측정하였고, 레이저 파라미터는 아세톤, 다이옥산, 에탄올 및 dimethylforamide (DMF)과 같은 여러 가지 용매에 대하여 계산하였다. DEAC의 광반응성은 366 nm 빛을 사용하여 $CCl_4$ 용매에서 연구하였고, 광화학 수득률 (${\Phi}_c$)과 속도 상수(k)도 결정하였다. picric acid (PA), tetracyanoethylene (TCNE), 7,7,8,8-tetracynoquinonedimethane (TCNQ)등의 유기 수용체와 DEAC의 상호 작용에 대한 연구는 acetonitrile ($CH_3CN$) 용액에서 형광을 측정하므로 써 수행하였다. DEAC의 전기화학적 연구는 백금 전극을 사용하여 0.1 mol/L tetrabutyl ammonium perchlorate (TBAP)/$CH_3CN$ 용액에서 순환 전류-전압법, convolutive voltammetry 및 디지털 시뮬레이션을 조합하여 수행하였고, 전기화학 파라미터도 결정하였다.

• 한국의류학회지
• /
• 제29권5호
• /
• pp.671-679
• /
• 2005

Chitosan is the affinitive finishing agent and gives susceptible effect in textile finishing. In order to examine the modification of polyester fabric treated with chitosan, we observed the characteristic of polyester fabric surface and measured its physical properties. For the purpose of confirming the adhesion of cationic material, we made a comparative study on anionic acid dye. The fabric was treated with crosslinking agent after chitosan finishing. Glutardialdehyde as crosslinking agent was used to improve the fixation rate of chitosan on the polyester fabric. And the US value was increased according to increasing of chitosan concentration. As the concentration of crosslinking agent was increased, whiteness index of the fabric chitosan treated was increased. Moisture regain of the fabric treated with $1\%$ chitosan was doubled and that treated with $2\%$ chitosan was tripled comparing with original fabric. Tensile strength of the chitosan treated fabric had been an increase of $10\%$ compared with alkali treated fabric and crease resistance decreased regardless of chitosan concentration.

• 대한화학회지
• /
• 제29권4호
• /
• pp.365-371
• /
• 1985

이온쌍크로마토그래피에 의한 유기 및 무기음이온을 분리하는데 반대이온으로서 양이온 염료인 메틸렌 부루$(MTB^+)$를 사용하여 흡수가 되지 않는 음이온 시료를 간접적으로 분광광도 검출기로서 가시영역인 665nm에서 검출할 수 있었으며 혼합시료의 분리를 시도한 결과 좋은 분리도와 높은 감도를 보여주었다. 또한 여러 실험조건에서 분리인자를 측정하여 머무름 기구를 조사하였다. 본 연구에서 머무름 기구는 $MTB^+$가 고정상에 일차층(primary layer)을 형성하고 반면 음이온 시료 또는 이동상에 존재하는 다른 음이온들이 경쟁적으로 이차층(secondary layer)을 형성하는 ion-interaction model임을 확인하였다.

• 한국염색가공학회지
• /
• 제30권1호
• /
• pp.29-37
• /
• 2018

Cotton has no adsorption ability for the cationic dye and heavy metal but, if anionized cotton can be made, it will be possible. In this study, to enable the anionisation of cotton fabric, it was modified using sodium vinylsolfonate(SV) as the anionisation reagent, employing a pad-dry-cure(PDC) technique. The effects of curing time, treatment concentrations of urea, sodium hydroxide and SV on the weight increase were experimented and then, the physical characterizations of sulfoethyl cotton(SEC) depending on the finishing conditions were estimated, thus the application possibility of SV as anionisation reagent was investigated. It was not much changed by anionisation except wrinkle recovery. And the structure of SEC was elucidated by Raman and NMR spectoscopy. The feasibility of using Raman and NMR spectroscopy with the band at $1,043cm^{-1}$, and 50.5ppm, respectively as marker band to determine sulfoethyl group of SEC was reported. The total degree of SV substitution(DSV) was determined via elemental analysis. SEC with diverse total DSV up to 0.066 was obtained. In the thermal decomposition(pyrolysis) by DSC, it can be found that the pyrolysis temperature was about $30^{\circ}C$ lower than that of non-treated cotton fabric.