• Journal of the Korean Ceramic Society
• /
• v.20 no.4
• /
• pp.361-365
• /
• 1983

The Cation Exchange Isotherm of $Na^+$ Montmorillonit with Cysteammonium ion is determined. It is shown that Cysteammonium ion is bonded relatively good on the silicate interlayer of Montmorilloint. And it is also shown that the bonded $HSCH_2CH_2NH_3^+$ ion on the Silicate interlayer reacts with the transition metal ion $Co^+$ in is SH group.

• Environmental Analysis Health and Toxicology
• /
• v.6 no.3_4
• /
• pp.143-148
• /
• 1991

This study was carried out to develop the low-priced adsorbent by synthesizing the zeolite of high cation exchange capacity with the natural zeolite and to examine the adsorbing ability of this zeolite. The dominant clay minerals were clinoptilolite and mordenite in natural zeolite, while phillipsite in the synthesized zeolite. Adsorption reaction of $NH_4^{+}$on zeolite was reached equilibrium after 2 hrs. The amount of adsorption was increased with increasing the concentration of $NH_4^{+}$or the pH of suspension. The cation exchange capacity of zeolite was slightly decreased below pH 4.0 by acidic treatment. It was estimated that the ability of the synthesized zeolite to remove noxious ions was better than that of the natural zeolite.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.8 no.3
• /
• pp.173-179
• /
• 2010

In a HLW repository, the buffer is exposed to an elevated temperature due to a radioactive decay and geochemical conditions for a long time and such a hydrothermal condition may cause a significant loss of its barrier function. This study carried out hydrothermal tests with a domestic smectite clay to investigate the changes in the expandibility, layer charge, and cation exchange capacity of the smectite. When the temperature and potassium concentration in solution was increased for the hydrothermal treatments, the expandibility decreased, the layer charge negatively increased, and the CEC also decreased.

• Asian-Australasian Journal of Animal Sciences
• /
• v.17 no.12
• /
• pp.1712-1716
• /
• 2004

Copper-bearing montmorillonite (Cu-MMT) was produced by $Cu^{2+}$ cation exchange reaction. X-ray diffraction analysis showed that that the (001) basal spacing of the MMT crystal lattice increased from 1.544 to 1.588 nm after $Cu^{2+}$ exchange. This indicated that $Cu^{2+}$ entered into interlayer position of MMT as a hydrated cation or composite cation. In vitro results indicated that Cu-MMT had antibacterial activity on Escherichia coli $K_{88}$. Cu-MMT had unbalanced positive charge after cation exchange. Its antibacterial activity resulted from two aspects, one was electrostatic attraction which made E. coli $K_{88}$ being adhered on the montmorillonite surface, the other was the $Cu^{2+}$ slowly released, which could kill bacteria. In an in vivo study, four replicates of eight weanling pigs were assigned to each of two dietary treatments to study the effects of Cu-MMT on diarrhea, E. coli in the lumen of the jejunum and morphology of jejunal mucosa. As compared to the control, supplementation of the diet with 0.2% Cu-MMT improved average daily gain by 12.50% (p<0.05) and decreased F/G by 9.42% (p<0.05). The mean diarrhrea incidence was decreased by 71.80% (p<0.05). The viable counts of Escherichia coli in jejunal contents were significantly reduced (p<0.05). Villus height and the villus height to crypt depth ratio at the jejunal mucosa were increased by 19.09% (p<0.05) and 37.10% (p<0.05), respectively.

• Applied Chemistry for Engineering
• /
• v.9 no.5
• /
• pp.680-688
• /
• 1998

The macroreticular (MR) type glycidylmethacrylate (GMA)-divinylbenzene (DVB) copolymer (polyglycidylmethacrylate) beads (RG) were prepared by a suspension polymerization using 0~100 vol % of 2,2,4-trimethylpentane (TMP) as a diluent. Macroreticular type cation exchange resins containing phosphoric acid groups (RGP) were prepared by the reaction of GMA-DVB copolymer and poly (glycidyl methacrylate) bead (RG) with phosphoric acid in the presence of benzene. In this study, the effect of degree of crosslinking and the amount of the diluent on physical properties and adsorbability of uranium of RGP resins were investigated respectively. The chemical and physical properties of RGP resins were affected by both of the amount of the diluent and the degree of crosslinking. The effect of degree of crosslinking on the adsorbed amount of uranium for RGP resins were decreased in the order of $$RGP-10(50){\sim_=}RGP-1(50)>RGP-2(50)>RGP-5(50)>RGP-0$$. The effect of the diluent amount were as follows RGP-2(100)>RGP-2(75)>RGP-2(50)>RGP-2(30)>RGP-2(0). The crosslinking degree effect on uranium adsorbability depended on pore structure, cation exchange capability and swelling ratio. On the other hand, the effect of the diluent amount were relied on surface area and pore structure raher than cation exchange capability.

• Journal of the Korean Chemical Society
• /
• v.33 no.2
• /
• pp.232-237
• /
• 1989

The elution mechanism of rare earth elements in cation exchange resin which was substituted with $NH_4^+,\;Zn^{2+}\;or\;Al^{3+}$ as a retaining ion had been investigated. Rare earths or rare earths-EDTA complex solution was loaded on the top of resin bed and eluted with 0.0269M EDTA solution. When the rare earth-EDTA complex was adsorbed on the $Zn^{2+}\;or\;Al^{3+}$ resin form, retaining ion was complexed with EDTA and liberated rare earths was adsorbed in the resin again. Adsorbed rare earths in resin phase could be eluted by the complexation reaction with EDTA eluent. On $NH_4^+$ resin form, the rare earth-EDTA complex which had negative charge could not adsorbed on the cation exchange resin because the complexation reaction between $NH_4^+$ and EDTA was impossible. So the elution time was much shorter than in $Zn^{2+}\;or\;Al^{3+}$ resin form. When the rare earths solution was loaded on the $Zn^{2+},\;Al^{3+}$ resin form bed, rare earths was adsorbed in the resin and the retaining ion was liberated. Adsorbed rare earths in resin bed was exchanged by EDTA eluent forming rare earths-EDTA complex, and eluted through these processes. On $NH_4^+$ resin form, rare earths loaded was adsorbed by exchange reaction with $NH_4^+$. As the EDTA eluent was added, rare earths was liberated from resin forming negatively charged rare earth-EDTA complex and eluted without any exchange reaction. So the elution time was greatly shortened and there was no metallic ion except rare earths in effluent. When the $Zn^{2+}\;and\;Al^{3+}$ was used as retaining ion, the pH of efflent was decreased seriousely because the $H^+$ liberated from EDTA molecule.

• Membrane Journal
• /
• v.2 no.1
• /
• pp.49-58
• /
• 1992

Functionalized organic polymers have been used as supports for heterogenized homogeneous catalytic process[1]. Sprcific advantages of using these resins as support reagents have been reviewed[2-4]. These include: -ease of by-product separation from the main reaction product usuallyby simple filtration. -prevention of intermolecular reaction of reactive species or functional groups by simulating high dilution conditions[5]. -utility of the "fish-hook" principle in which a minor component in fished out of a large excess substrate by the insoluble polymer[6]. -the possibility of reusing recovered reagents as well as eliminating the use of volatile or noxious substances[7]. Catalysis by ion-exchange membranes is perhaps one of the latest examples of the use of a polymer-supported species. Conceptually, catalysts on membrane supports offer several possible advantages over traditional powder type systems. They are: (1) Membranes immobilize the catalyst, preventing agglomeration. (2) Filtration is unnecessary for the catalyst separation and so complete catalyst recovery is facilitated. (3) Catalytyic and separation processes can be combined, allowing membrane supported catalysts for the continous flow reactors. reactors.

• Journal of the Korean Chemical Society
• /
• v.28 no.1
• /
• pp.62-69
• /
• 1984

The reaction of toluene with ethanol was studied over various cation-exchanged pentasil zeolite catalysts. The toluene disproportionation reaction to produce xylenes increased with increasing reaction temperature and the activity of alkylation of toluene with ethanol showed maximum at around $400^{\circ}C$. Only Cs-ZSM-5 catalyst showed pronounced p-ethyltoluene selectivity increasing to 96% with increasing degree of Cs-exchange. The sorption rate of m-xylene was lower for Cs-exchanged ZSM-5 than H-ZSM-5 catalyst. These phenomena were interpreted in terms of shape selectivity arising from the partial blocking of channel intersections by large cesium ions.

• Bulletin of the Korean Chemical Society
• /
• v.22 no.8
• /
• pp.867-871
• /
• 2001

We have studied the characteristic wave propagation in 1,4-CHD-Bromate-Ferroin reaction system and we have examined the bead size effect on the wave propagation of the system by adopting a half-divided Petri dish which is separated into two parts by the size of cation-exchange resin. It has been done to understand the reaction process inducing the characteristic wave behavior in the system. The characteristic wave behavior of the system is in the spontaneous induction of a revival wave with a long time lag. We have obtained a result that the revival wave is not affected by the size of catalyst-doped beads while the initially induced wave is influenced by the size of beads. It means that the two waves are induced by different reaction processes each other and the revival wave is induced by an uncatalyzed reaction process.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.14 no.1
• /
• pp.1-15
• /
• 1988

A new method for liquid chromatography with post column reaction is suggested for the separation and quantification of tertiary amines. A mixture of triethanolamine and N-ethyl diethanolamine was separated by a strong cation exchange column, followed by spectrophtometric detection of the blue colors generated from the reaction of each amine with the Folin-Ciocalteau reagent. The tertiary amines were properly separated when an eluent of pH 9.5 containing 0.5M sodium nitrate was used. Under this condition, calibration curve of triethanolamine in 2-10mg/100ml concentration range was attained. Good results were obtained when cream and shampoo preparations containing known amount of triethanolamine were analysed according to this method. In case the sample did not contain any other interfering reducing substances, the amine was quantitatively determined by the simple reaction of the samples with Folin-Ciocalteau reagent, and the subsequent spectrophotometric measurement.