• Title/Summary/Keyword: Catholic church

Search Result 83, Processing Time 0.022 seconds

A Study on the Church Building Type and Design Source of the church architect P. Alwin Schmid - Focused on the Influence of Dominikus Bohm and Rudolf Schwarz - (교회 건축가 알빈 슈미트신부의 성당건축 유형과 디자인 원천에 관한 연구 - 도미니쿠스 뵘과 루돌프 슈바르츠의 영향관계를 중심으로 -)

  • Kim, Jung-Shin
    • Journal of architectural history
    • /
    • v.16 no.4
    • /
    • pp.131-148
    • /
    • 2007
  • This study aims at searching the Church Building Type and Design Sources of a German church architect who had designed many churches and other buildings in Korea. P. Alwin Schmid(1904-1978) had designed 188 Catholic buildings in Korea for 20 years from 1958 to 1978. In his works there are many excellent Catholic ritual buildings. It was caused by his conviction on the theology and the principles of Church Architecture. And His remarkable achievement is affected by the works of Dominikus Bom(1880-1955) and Rudolf Schwarz(1897-1961). Alwin's 5 plan type is relevant to Schwarz' iconographic model, and their approach to 'light' is much the same. But the Character of inner space is the middle of Dominikus Bom and Rudolf Schwarz. His works rotted in the Liturgical Movement had been developed in the line of connection with 20th German church architecture. The works of Dominikus Bom and Rudolf Schwarz played the role of the teacher of Alwin Schwarz.

  • PDF

Architectural Characteristics of Catholic Churches built in 1950s in Gangwon Province (1950년대 건립된 강원지역 성당건축의 건축적 특성)

  • Seo, Seong Nam;Choi, Jang Soon
    • Journal of the Korean Institute of Rural Architecture
    • /
    • v.20 no.4
    • /
    • pp.65-75
    • /
    • 2018
  • This thesis attempts to investigate and analyse the architectural characteristics of catholic churches in Gangwon province built in the 1950s. Catholic churches built at that time in Korea had many similarities basically since they were supported by UN forces after the Korean War and were established by priests connected to the Missionary Society of St. Columban. The results of study are as follows. In location, Except one catholic church, the catholic churches preferred low and gentle hill. In layout axis, catholic churches at Youngseo area preferred the north-south layout axis, whereas those at Youngdong favor the east-west layout axis. In approach, most of catholic churches around the Youngseo and Youngdong areas preferred entering the front entrance with a bell tower, whereas three of them at Youngdong did entering the front entrance with a bell tower around the rear corner. In floor plan, catholic churches at Youngseo preferred symmetry, whereas those at Youngdong preferred asymmetry. And every floor plan of catholic churches is rectangular type with transepts except one semicircular type. In apse shape, catholic churches in the Youngseo area preferred non-extruded types like a straight wall, whereas those in Youngdong have extruded types. Every catholic churches have no crypt under ground except one at Gangreung. Except one at Sokcho, every catholic church in this study has choir space in half story.

A study on the architecture of the Catholic Church in Gwangju Archdiocese during the Liberation and Turbulent Periods (해방과 격동기 광주대교구 가톨릭 성당건축에 관한 연구)

  • Kim, Jae-Ung
    • Journal of architectural history
    • /
    • v.31 no.2
    • /
    • pp.27-34
    • /
    • 2022
  • This study aimed to elucidate the architectural characteristics of the cathedral architecture of the Archdiocese of Gwangju, which was completed in the period of liberation and turbulence, and the conclusions are as follows. Gwangju Archdiocese Cathedral, completed during the period of liberation and turbulence, was built with some assistance from the U.S. military or with the efforts of the faithful, and there are a number of factors such as space directing by Aps, the development of a simplified bell tower, the appearance of a stone cathedral, the application of a quenset structure, and an increase in size. show special features The indented apse appears only after liberation, and is a characteristic that appears prominently in stone churches. The simplified form in which the bell was hung by raising the outer wall appeared in the early church shows a change in the composition with a porch in front. The stone church and the quanset-structured church only appeared after liberation and were built only in the 1950s. The size of the cathedral reflects the increase in the number of believers after the Korean War, and the average area is about 1.5 times higher than before liberation. When considering the spacing of the bays as a module, the size plan followed the implicit norm of early cathedral architecture of 36.5m, but gradually decreased to 2.7m and 2.4m.

A Comparative Study on the Design Characteristics of Catholic Church in Korea, China and Japan - Focus on the basilican brick church in the early stage - (한.중.일 초기 성당건축의 의장적 특성에 대한 비교연구 - 현존하는 초기 삼랑식 벽돌조 성당건축을 중심으로 -)

  • Kim, Jung-Shin
    • Korean Institute of Interior Design Journal
    • /
    • v.21 no.3
    • /
    • pp.67-75
    • /
    • 2012
  • This Study is concerned with the Design Characteristics of Korean, Chinese and Japanese brick church architecture. The main subject of the study is to investigate the commonness and difference between Korean, Chinese and Japanese brick church architecture in the early stage(1880-1920). In carrying this study into execution, I examined the architectural and historical backgrounds based on the preceding research works, and analysed the plan, the spacial composition, design elements, techniques and materials, etc. The result of this study is as follows ; The basic concept of composition of space is same in order to embody the Basilican space, but the inner elevation and detail of brick structure is different. Chinese churches are more close to Western basilican style church in the point of shape and plan, but in the point of inner elevation and decoration of church, Japanese churches are more close to Western style church. Korean churches are in the middle of its. There are different attitudes of naturalization of western church architecture in Korea, China and Japan.

  • PDF

Documentation of the History of Ok-Cheon Catholic Church by standardized 2D CAD and 3D Digital Modeling (표준화된 2D CAD와 3D Digital Modeling을 이용한 옥천천주교회의 연혁 기록)

  • Kim, Myung-Sun;Choi, Soon-Yong
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.12 no.1
    • /
    • pp.523-528
    • /
    • 2011
  • Ok-Cheon catholic church has been changed 4 times since it's first construction in 1955. Prior three changes were small ones of windows, doors, roof finish etc. but the last alteration was the extension of it's plan from 一 shape to long cross shape and along with it the size, structure and form of it changed. This history of the church has not been recorded in drawing but only in text with indistinct features not documented. This study makes a new 2D CAD files using layers matched the changes and 3D digital models, these have not only present information but also change informations of the church. They are useful data for effective management, conservation restoration or possible reuse of it.

A Study on the Development of Records Management System Using Open Source Software For Catholic Church (가톨릭교회 오픈소스 기록관리시스템 구축 방안에 관한 연구)

  • Hwang, Ji Min;Lee, Ji-Won
    • Journal of the Korean Society for information Management
    • /
    • v.38 no.1
    • /
    • pp.263-291
    • /
    • 2021
  • This study aims to develop a records management system for catholic churches that use open-source software to ensure systemic management and preservation of sacrament records, which accounts for the highest percentage among all records produced by catholic churches and holds great significance for them. To that end, the researcher analyzed catholic church regulations and reference materials, as well as the websites of open-source software. The researcher also interviewed members at the G Cathedral of the Catholic Archdiocese of Daegu, to examine the current status of records management at catholic churches. Based on the investigation, the researcher designed four layers of metadata and authority data that reflected the characteristics of the sacramental records. Then the design was experimentally implemented using AtoM, an open-source records management system.