• 자원환경지질
• /
• 제49권1호
• /
• pp.63-75
• /
• 2016

전 세계적 유 가스전에서 균열저류층의 비율은 매우 높다. 따라서 경제적인 유가가 뒷받침 될 경우 균열저류층에 대한 시추기술 수요는 계속 증가될 전망이다. 이 해설논문의 목적은 균열저류층에서 이수손실을 방지하는데 적합한 시추기술 선정에 도움을 주기 위한 것이다. 이러한 목적을 달성하기 위해 균열저류층을 이수손실의 규모에 따라 부분 이수손실지층과 전체이수손실지층으로 재분류하였다. 부분이수손실지층의 시추 시에는 이수 첨가물인 이수손실방지제와 시멘트 스퀴징 방법이 유용하며, 전체이수손실지층에서는 천부의 경우 케이싱시추방법이, 심부의 경우 이수캡시추 기법이 이수손실을 방지하는데 유용한 시추방법인 것을 알 수 있었다. 이러한 결과는 이탈리아 Medusa-1과 카타르의 North field 현장사례를 통해서도 확인할 수 있었다.

• 한국소음진동공학회논문집
• /
• 제18권9호
• /
• pp.937-942
• /
• 2008

이 논문은 건설이 완료된 700MW급 발전소의 시운전 기간 중 주 급수펌프 임펠러에서 반복적으로 발생된 웨어링 이탈 및 고착, 슈라우드 손상 그리고 축 절단 등의 절손이 부분부하 조건에서 증폭되는 압력맥동과 연관이 있는 것으로 규명되었다.

• Journal of Biosystems Engineering
• /
• 제43권3호
• /
• pp.185-193
• /
• 2018

Purpose: The purpose of this study was to analyze the performance factors of a rotary impact-type thresher to develop a sesame and perilla thresher, specifically to analyze the cut length of the stems and the threshing rates based on the relationship between the blade velocity and feeding speed. Methods: The materials were dried within a range of 12.3-13.0% to test the impact cut by bending. The cut lengths of the perilla and sesame stems were categorized in 6 ranges (~7.0, 7.1-10.0, 10.1-13.0, 13.1-16.0, 16.1-20.0, 20.1- (cm)). For testing the cut length and threshing rate, the upward-rotating blade velocity was varied as 11.0 m/s, 13.5 m/s, and 22.3 m/s. Feeding speeds were changed from 0.1 m/s to 2.2 m/s by the inverter connected to the feed motor. The feed rate and threshing rates without cover-casing were evaluated with the factors of thresher testing. Results: The mean cut length of the stem decreased as the blade velocity increased and/or the feeding speed decreased. As the feed rate increased up to 17.5 g/s, the cut length distributions showed no significant difference. The threshing rate was 98.9% for sesame, and flexible according to the blade velocity and feeding speed of the perilla. Conclusion: Feeding material too fast could produce longer cut stem segments, therefore, a feeding speed less than 2.2 m/s is recommended. A blade velocity of 13.5 m/s is preferable for both sesame and perilla with regard to cut length and threshing rate.

• 한국유체기계학회 논문집
• /
• 제18권3호
• /
• pp.46-52
• /
• 2015

Pump-turbine system is widely used by the hydropower industry for stabilizing the electrical grid in the vast growing economy of most developed countries. This study only investigates the Fluid-structure Interaction (FSI) analysis of the pump-turbine system at various operating conditions. The FSI analysis can show how reliable each component of the system is by providing the engineer with a better understanding of high stress and deformation points, which could reduce the lifespan of the pump-turbine. Pump-turbine components are categorized in two parts, pressurized static parts and movable stressed parts. The fixed parts include the spiral casing, top and bottom cover, stay vane and draft tube. The movable parts include guide vanes and impeller blades. Fine hexahedral numerical grids were used for CFD calculation and fine tetrahedral grids were used for structural analysis with imported load solution mapping greater than 90 %. The maximum equivalent stress are much smaller than the material yield stress, and the maximum equivalent stress showed an increasing tendency with the varying of operating conditions from partial to excessive at both modes. In addition, the total deformation of all the operating conditions showed a small magnitude, which have quite small influence on the structural stability. It can be conjectured that this system can be safely implemented.

• 한국CDE학회논문집
• /
• 제13권2호
• /
• pp.139-152
• /
• 2008

In order to survive worldwide competition, today's industries are experiencing strong pressure to introduce higher quality products with lower cost and shorter lead-time. Therefore, the role of design in the process of product development is increasing in significance. In this research, two methods for improving the design capability are proposed: construction of design environment and design automation using 3D CAD system. The designers and design process are the core of product design using 3D CAD system. In order to maximize the design performance, construction of the design environment including selection of a suitable system, designer training for best use of the system, establishment of an efficient design process, and stabilization of the environment are required. A method is suggested to construct design environment by systematizing the contents of the projects and consulting experiences carried out for various categories of business such as electronic devices, motorcycles, electricity parts, sanitary wares, injection molds, and die casing molds. Design automation helps reduce tedious and time-consuming jobs, simplify complicated and error-prone modeling and drawing works to shorten the lead time and improve the product quality. To develop a design automation system, understanding the process and the related knowledge on design are very important before implementing the system using API provided by 3D CAD system. In this research, an eight-step procedure is proposed for the development of a design automation system. These eight steps are analysis of needs, determination of specification, verification of specification using 3D CAD system, inspection of related API functions, programming, field test, application in practice, and maintenance. A case study in which five design automation systems in the design of turbine generators using the proposed method is introduced in detail. These systems play important roles in the generation of various output items including 3D models, drafts, material information, and NC data. The case study shows how effectively the design time is reduced and the quality improved using those systems.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 세계 도시지반공학 심포지엄
• /
• pp.404-411
• /
• 2009

The steel pipe of steel-concrete composite piles increases the pile strength and induces the ductile failure by constraining the deformation of the inner concrete. In this research, the load-movement relations and the reinforcement effect by the outer steel pipe in the steel-concrete composite pile were analyzed by performing three-dimensional numerical analyses, which can simulate the yielding behavior of the pile material and the elasto-plastic behavior of soils. The parameters analyzed in the study include three pile materials of steel, concrete and composite, pile diameter and loading direction. As the results, the axial capacity of the composite pile was 1.9 times larger than that of the steel pipe pile and similar with that of the concrete pile. At the allowable movement criteria, the horizontal capacity of the composite pile was 1.46 times larger than that of the steel pile and 1.25 times larger than that of the concrete pile. In addition, the horizontal movement at the pile head of the composite pile was about 78% of that of the steel pile and about 53% of that of the concrete pile, which showed that the movement reduction effect of the composite pile was significant and enables the economical design of drilled shafts.

• Mycobiology
• /
• 제43권3호
• /
• pp.184-194
• /
• 2015

A compressive description of tropical milky white mushroom (Calocybe indica P&C var. APK2) is provided in this review. This mushroom variety was first identified in the eastern Indian state of West Bengal and can be cultivated on a wide variety of substrates, at a high temperature range ($30{\sim}38^{\circ}C$). However, no commercial cultivation was made until 1998. Krishnamoorthy 1997 rediscovered the fungus from Tamil Nadu, India and standardized the commercial production techniques for the first time in the world. This edible mushroom has a long shelf life (5~7 days) compared to other commercially available counterparts. A comprehensive and critical review on physiological and nutritional requirements viz., pH, temperature, carbon to nitrogen ratio, best carbon source, best nitrogen source, growth period, growth promoters for mycelia biomass production; substrate preparation; spawn inoculation; different supplementation and casing requirements to increase the yield of mushrooms has been outlined. Innovative and inexpensive methods developed to commercially cultivate milky white mushrooms on different lignocellulosic biomass is also described in this review. The composition profiles of milky white mushroom, its mineral contents and non-enzymatic antioxidants are provided in comparison with button mushroom (Agaricus bisporus) and oyster mushroom (Pleurotus ostreatus). Antioxidant assay results using methanol extract of milky white mushroom has been provided along with the information about the compounds that are responsible for flavor profile both in fresh and dry mushrooms. Milky white mushroom extracts are known to have anti-hyperglycemic effect and anti-lipid peroxidation effect. The advantage of growing at elevated temperature creates newer avenues to explore milky white mushroom cultivation economically around the world, especially, in humid tropical and sub-tropical zones. Because of its incomparable productivity and shelf life to any other cultivated mushrooms in the world, milky white mushroom could play an important role in satisfying the growing market demands for edible mushrooms in the near future.

• Smart Structures and Systems
• /
• 제30권3호
• /
• pp.327-332
• /
• 2022

In building envelope, transparent components play an important role. The structural glazing systems are the weak element of the casing in terms of mechanical resistance, thermal and acoustic insulation. In the present work, new structural glass panels with granular aerogel in interspace were investigated from different points of view. In particular, the mechanical characterization was carried out in order to assess the resistance to bending of the single glazing pane. To this end, a special instrument system was built to define an alternative configuration of the coaxial double ring test, able to predict the fracture strength of glass large samples (400 × 400 mm) without overpressure. The thermal and lighting performance of an innovative double-glazing façade with granular aerogel was evaluated. An experimental campaign at pilot scale was developed: it is composed of two boxes of about 1.60 × 2 m² and 2 m high together with an external weather station. The rooms, identical in terms of size, construction materials, and orientation, are equipped with a two-wing window in the south wall surface: the first one has a standard glazing solution (double glazing with air in interspace), the second room is equipped with the innovative double-glazing system with aerogel. The indoor mean air temperature and the surface temperature of the glass panes were monitored together with the illuminance data for the lighting characterization. Finally, a brief energy characterization of the performance of the material was carried out by means of dynamic simulation models when the proposed solution is applied to real case studies.

• 한국지반공학회논문집
• /
• 제26권11호
• /
• pp.29-38
• /
• 2010

강관합성말뚝은 외부 강관의 합성 구속효과에 의해 말뚝강도가 커지고, 연성파괴 거동이 발생한다. 본 연구에서는 해상 지반에 근입된 무리말뚝에 대하여 말뚝재료의 항복거동 및 지반의 탄소성 거동을 함께 고려할 수 있는 3차원 수치해석을 수행하여 하중-변위 거동 및 강관합성말뚝의 보강효과를 분석하였다. 이를 위하여 강관, 콘크리트, 강관합성말뚝에 대하여 각각 말뚝간격, 말뚝직경 그리고 재하방향을 달리한 변수연구를 수행하였다. 그 결과 수직방향지지력의 경우 강관합성말뚝은 강관말뚝과 비교하여 평균 90% 큰 것으로 나타났고, 콘크리트 말뚝에 대하여는 평균적으로 동일하게 나타났다. 그러고 허용변위 기준에서의 수평방향 지지력의 경우 강관합성말뚝은 강관말뚝보다 평균 50%, 콘크리트 말뚝보다 평균 22% 더 큰 것으로 나타났다.

• 지질공학
• /
• 제26권1호
• /
• pp.101-115
• /
• 2016

관정의 시멘팅 재료로 사용될 수 있는 두 시멘트 물질(KS-1 보통 포틀랜드, Class G)의 물/고체(고체=시멘트) 중량비와 첨가제인 비산재의 부피함량 변화에 따른 이들 물질들의 물리역학적 물성 변화를 파악하기 위해 실내물리역학실험을 실시하였다. KS-1 보통 포틀랜드 시멘트의 경우 물/고체(고체=시멘트) 중량비를 변화시키며, Class G 시멘트의 경우 물/고체(고체=비산재+시멘트)을 고정한 채 비산재:시멘트의 부피비를 변화시키며 시료를 제작하였다. KS-1 보통 포틀랜드 시멘트의 경우 물/고체 중량비가 증가할수록, Class G 시멘트의 경우 비산재의 함량이 증가할수록, 공극률 증가, 밀도감소, 음파속도(P, S파) 감소. 탄성상수(영율, 포아송비) 감소, 압축 및 인장강도 저하, 열전도도 감소, 비열 증가의 경향을 보였다. 또한 구속압(σ₃)의 증가와 비산재 함량의 증가는 재료의 소성파괴거동을 초래하였다. 이 실내실험결과를 이용하여, 여러 주입공 페라미터(케이싱, 시멘트층의 두께, 주입압, 주입공 경사방향 및 경사각, 주입공 심도)등을 변화 시키면서, 시멘트층의 안정성 분석을 실시하였다. 분석결과 낮은 주입압과 경사정 혹은 수평정에서는 시멘트층이 안정하였으나, 다른 조건에서는 시멘트층에서 주로 인장파괴가 관찰 되었다.