• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.19 no.3
• /
• pp.216-221
• /
• 2006

Lifetime control technique by proton implantation has become an useful tool for production of modern power devices. In this work, punch-through type diodes were irradiated with protons for the high speed power diode fabrication. Proton irradiation which was capable of controlling carrier's lifetime locally was carried out at the various energy and dose conditions. Characterization of the device was performed by current-voltage, capacitance-voltage and reverse recovery time measurement. We obtained enhanced reverse recovery time characteristics which was about $45\;\%$ of original device reverse recovery time and about $73\;\%$ of electron irradiated device reverse recovery time. The measurement results showed that proton irradiation technique was able to effectively reduce minority carrier lifetime without degrading the other characteristics.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2001.11a
• /
• pp.44-48
• /
• 2001

In this paper we describe the design of symbol timing and carrier synchronization algorithms for burst receiver. The demodulator consists of digital down converter, matched filter and synchronization circuits. For symbol timing recovery we use modified Gardner algorithm. And we use decision directed method for carrier phase recovery. For the sake of performance analysis, we compare simulation results with the board implemented by FPGA which is APEX20KE series chip for Alter. The performance results show it works quite well up to the condition that a frequency offset equal to 0.1% of symbol rate.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.7
• /
• pp.1820-1832
• /
• 1996

The performance of a carrier recovery is severely degraded because of amplitude fluctuations and random phases of the received signai caused by multipath fading in mobile radio channel. In this paper, we present two kinds of carrier recovery technique using pilot tone such as TCT(Tone Calibration Technique) and DTCT(Dual Tone Calibration Technique) and analyze these performance both in Rayleigh and Rician fadings. we also evaluate the BER performance of two carrier recovery systems in terms of design parameters such as pilot-to-singnal power ratio, and detection filter-to-pilot filter bandwidth ratio.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.4
• /
• pp.561-571
• /
• 1993

In this paper, a new discrete Symbol Timing Recovery (STR) algorithm, is proposed. This algorithm is derived from the optimum estimation theory. The algorithm combines the advantages of Mueller and $M\"{u}ller$ algorithm and Gardner algorithm, and avoids some of their shortcomings. The implementation of the new timing detector is simple and the combined operations of Carrier Recovery (CR) -STR is possible because the operation of the new STR is independent of the carrier phase. On the other hand, the behavior of nonlinear characteristics in the new algorithm is analyzed and explained. The performance evaluation is accomplished in detail by numerical calculations and Monte-Carlo simulations. In these respects, this algorithm is similar to Gardner's algorithm, but in tracking performance due to pattern jitter at small rolloff, the proposed algorithm is superior to Gardner's algorithm.

• ETRI Journal
• /
• v.28 no.4
• /
• pp.435-443
• /
• 2006

This paper presents an efficient carrier recovery algorithm combined with a turbo-coding technique in a mobile communication system. By using a block turbo code made up of independently decodable block codes, we can efficiently recover the fast time-varying carrier phase as well as correct channel errors. Our simulation results reveal that the proposed scheme can accommodate mobiles with high speed, and at the same time can reduce the number of iterations to lock the phase.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.1
• /
• pp.56-62
• /
• 2011

A Satellite transponder is mounted on the Satellite and performs radio communications with the ground station. A Digital transponder compared to The analog transponder is made easy and accurate performance prediction. Also Modulation Scheme, Data Rate, Loop Bandwidth, Modulation Index and etc. can be changed on orbit, by implementing FPGA can reduce the weight and volume. The core technology of digital transponder is Carrier Recovery loop. Dynamic Range, Frequency Tracking Range, Frequency Tracking Rate and Coherent performance are determined by the performance of the Carrier Recovery loop. In this paper, we proposed the structure of Carrier Recovery loop for the Satellite digital transponder, then tested and verified the structure.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.6A
• /
• pp.920-930
• /
• 1999

Many researches on the multi-level QAM(Quadrature Amplitude Modulation) which is known to be a promising digital data transmission method for efficient use of channel bandwidth have been carried on, and their applications to various real fields are now being in progress. However, in the band-limited communication systems, each transmitted symbols is distorted by the ISI(Intersymbol Interference) and the phase error. Therefore, an equalizer and a carrier recovery must be taken into considerations to attenuate the effects of these distortions in the receiver. This paper presents an effective receiver structures that is applicable to the multi-level QAM. The proposed receiver system is consisted of an equalizer with Godard’s blind algorithm and a carrier recovery circuit. The phase error is estimated with a $\theta$-matching algorithm and is used in the carrier recovery to recover the correct phase. The simulation results are included to evaluate performance of the proposed receiver system for the various channel models.

• Membrane and Water Treatment
• /
• v.5 no.2
• /
• pp.147-170
• /
• 2014

This paper focuses on the study of the most recent ultra-filtration techniques, based on porous polymer membranes, used for the treatment of wastewater from oil, mine and hydrometallurgical industries. The performance of porous membranes used in separation and recovery of oil and heavy metals from wastewater, was evaluated by the polymer composition and by the membrane characteristics, as it follows: hydrophobicity or hydrophilicity, porosity, carrier (composition and concentration), selectivity, fouling, durability, separation efficiency and operating conditions. The oil/water efficient separation was observed on ultra-filtration (UF) techniques, with porous membranes, whereas heavy metals recovery from wastewater was observed using porous membranes with carrier. It can be concluded, that in the ultra-filtration wastewater treatments, a hybrid system, with porous polymer membranes with or without carrier, can be used for these two applications: oil/water separation and heavy metals recovery.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.30A no.11
• /
• pp.1-10
• /
• 1993

A Study on New Digital In this paper, we propose a new Angular Form Carrier Recovery Loop(AFCR loop) for PSK modulation technique. AF CR loop includes detected angle symbol and Multi Level Hardlimiter. Using zero crossing DPLL, we model 1st 2nd AF CR loop, and also derive SCurve. In order to prove steady state operation of AF CR loop, we evaluate performance of this loop by Monte-Carlo and analytical simulation method. We also compare the performance of AF CR loop to that of other loop in terms of acquisition, S-Curve, and RMS jitter. From the comparison result, we verify that the performance of AF CR loop operates well in steady state.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.7
• /
• pp.1777-1786
• /
• 1996

This paper describes theories and implementation techniques of a digital high-definition television(HDTV) modem based on 32-QAM for terrestrial broadcasting. We proposed a digital demodulation scheme and a symbol timing recovery structure based on the band edge component maximization(BECM) method. The adaptive equalizer has 256 complex taps to remove the multipath of delays ranging from -2.mu.s~+24.mu.s with a new T/2-spaced blind equalization algorithm. computer simulation results reveal that the proposed algorithm outperforms other conventional blind equalization algorithm a digital HDTV modem with 4.91MHz symobol rate is implemented by utilizing the proposed algorithms. All processings for modem operations such as demodulation, estimation of symbol timing phase error, adaptive equalization, and carrier recovery except IF signal processing and sampling phase control part of the AD converter are done in digital domain. Especially, the carrier recovery loop can track a carrier offset of upto .+-.350KHz.