• Journal of Pharmaceutical Investigation
• /
• v.14 no.1
• /
• pp.1-10
• /
• 1984

Effects of water soluble carrier on the dissolution characteristics of indomethacin coprecipitates were investigated. Water soluble carriers used were polyvinylpyrrolidone, dextrose, mannitol and their mixtures of various ratios. The dissolution rates of indomethacin from coprecipitate with ratios of drug-to-carrier, kinds of carrier and ratios of carriers were as follows: 1. The dissolution rates increased proportionally to the ratios of carrier in the case of both single and combined carrier, and the dissolution rate of coprecipitate with the combined carrier was more rapid than that with single carrier. 2. The combined carrier of PVP-dextrose (1 : 2) in the case of the coprecipitate of drug-to carrier (1 : 1) and PVP-dextrose (4 : 1) in the case of the coprecipitate of drug-to carrier (1 : 3) yield the most rapid dissolution rate. 3. The dissolution rate of indomethacin was the most markedly enhanced in the case of the combined carrier of PVP and dextrose.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.1338-1341
• /
• 1997

In this paper, we propose angular rate computation algorithm using GPS carrier phase. A direct angylar rate masurement has not previously been available form GRS, although its availability is highly desirable for use in state feedback control. So we propose angular rate computationalgorithm which derive angular rate from the velocity of differentiated carrier phase og GPS. The proposed algorithm contains attitude determination using double-differentiated carrier phase and 2 baseline configuration whcih provide more practical applications than 3 baseline.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.30A no.12
• /
• pp.69-76
• /
• 1993

The statistical methodology using RSM (response surface method) was used too ptimize the deposition conditions of selective CVD tungsten process for improving the deposition rate and the adhesion property. Temperature, flow rate of SiH$_4$ and WF$_6$ and H$_2$ and Ar carrier gases were chosen for the deposition variables and process characteristics due to carrier gas were intensively investigated. It was observed that temperature was the main factor influencingthe deposition rate in the case of H$_2$ carrier gas while the reactant ratio, $SiH_{4}/WF_{6}$, had the principal effect on the deposition rate in the case of Ar carrier gas. The increased deposition rate and the good adhesion to Si were obtained under Ar carrier gas compared to H$_2$ carrier gas. The optimum conditions for deposition rate and antipeeling property were found to be the temperature range of 300~32$0^{\circ}C$ and the reactant ratio, $SiH_{4}/WF_{6}$, of 0.5~0.6.

• Food Science of Animal Resources
• /
• v.25 no.3
• /
• pp.340-343
• /
• 2005

The objective of this work was to study separation of short peptide (glycine-tyrosine) by using supported liquid membranes (SLMs) containing Aliquat as a cationic carrier, In the present investigation, the influence of pH of donor phase, concentrations of carrier and salt concentrations of acceptor phase on separation flux rate were investigated. Below pH 7.0 the flux rate was not affected by NaCl concentration or carrier concentration. However, the rate was increased significantly above pH 7.0. The rate with Hossain's SLM(H-SLM) containing $20\%$ Aliquat was about 3-fold higher with pH 9.0 at 0.25 M NaCl and 10-fold higher with pH 8.0 at 1.0 M NaCl than that with Duggan's SLM(D-SLM) containing $8\%$ Aliquat respectively. Furthermore, the rate with H-SLM was 10-fold higher at 1.0 M NaCl than the rate with 0.25 M NaCl, In conclusion, it would appear that the rate of separation was facilitated by using high salt concentrations together with high carrier concentrations above pH 7.0.

• Journal of Environmental Health Sciences
• /
• v.27 no.3
• /
• pp.27-34
• /
• 2001

This paper discussed the shape effect of ceramic support carrier in order to facilitate biomass immobilization. The shape of ceramic support carrier was modified hollow pipe type into hollow gear type. After seeding, microorganisms were attached in crevices where protection from shear forces or surfaces where easy to contact with support carrier surface. In case of hollow gear type carrier, initial attachment rate was faster than that of hollow pipe type and obtained thick biofilm. Synthetic wastewater(COD:75~880 mg/L, organic loading rate:0.36~4.22 kgCOD/㎥.d) was treated aerobic fixed bed biofilm reactor where 100% of the volume was filled with the ceramic carrier. COD removal efficiency of reactor filled with gear type support carrier was a little high withing 70 days, and then showed similar removal efficiency. It was found that highly loaded operation with up to 4.22 kgCOD/㎥.d was possible in both reactor. Total biomass amounts of pipe type was higher than gear type, however, attached biomass of gear type was higher than that of pipe type.

• Journal of Advanced Information Technology and Convergence
• /
• v.9 no.1
• /
• pp.11-24
• /
• 2019

This paper investigates the performance comparison of a Terahertz (THz) communications for a single-carrier and a multi-carrier single antenna point-to-point communication system. The multi-carrier system and single carrier system consider the orthogonal frequency division multiplexing (OFDM) and the minimum mean square error linear equalizer (MMSE-LE), respectively. We compare the frame-error-rate (FER) and throughput performance of both the systems for a THz communication environment with the carrier frequency of 300GHz and the tapped delay line (TDL) channel models described in 3GPP. It is observed from the simulation results that the OFDM systems outperform the MMSE-LE for various configurations.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.11
• /
• pp.42-46
• /
• 2006

As an application of SDINS/GPS integration for its synergistic results, the SDINS alignments utilizing GPS carrier phase rate measurements. A measurement model of GPS carrier phase rate is derived in order to be used with SDINS alignment process. For in-flight alignment, the performance of the suggested SDINS/GPS integration method is analyzed using the covariance analysis and its results are confirmed by those of van test. Consequently, it is shown that all states of the SDINS integrated system by utilizing GPS carrier phase rate measurements can be estimated more efficiently than a general SDINS/GPS during in-flight alignment.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.4
• /
• pp.129-135
• /
• 1996

In this paper, the hot carrier effect and device degradation of deep submicrometer SC-PMOSFETs have been measured and characterized. It has been shown that the substrate current of a 0.15$\mu$m PMOSFET increases with increasing of impact ionization rate, and the impact ionization rate is a function of the gate length and gate bias voltage. Correlation between gate current and substrate current is investigated within the general framework of the lucky-electron. It is found that the impact ionization rate increases, but the device degradation is not serious with decreasing effective channel length. SCIHE is suggested as the possible phusical mechanism for enhanced impact ionization rate and gate current reduction. Considering the hot carrier induced device degradation, it has been found that the maximum supply voltage is about -2.6V for 0.15$\mu$m PMOSFET.

• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.4 no.1
• /
• pp.1-6
• /
• 2005

As an application of the GPS/SDINS integration for its synergistic results, the alignments of the SDINS utilizing GPS carrier phase rate measurements is introduced. A measurement model of GPS carrier phase rate, which does not require integer ambiguity determination process, is newly derived in order to be adopted with the SDINS in-flight alignment process. For in-flight alignment, the performance of the GPS/SDINS integration method suggested in this paper is analyzed using the covariance analysis.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.3
• /
• pp.378-390
• /
• 2001

In this paper, it is analyzed that the error performance of a Multi-Carrier DS-CDMA system in a single cell with multipath Rician fading and multiple access interference (MAI) and the error performance of the system is compared with that of a Sing1e-Carrier DS-CDMA system. Moreover, the convolutional coding techniques with code rate of 1/2, 1/3, and 1/4 are adopted in order to improve the error performance degraded by the multipath fading and MAI and performance improvement through the coding techniques is analyzed. As a result, it is shown that the number of users in each system can be determined by the number of branches of the rake receiver in a Single-Carrier DS-CDMA system and the number of carriers in a Multi-Carrier DS-CDMA system. Furthermore, the convolutional coding should be chosen with considering the trade-off between coding gain and a power limitation in a Multi-Carrier DS-CDMA system. In case of increasing the number of carriers, the processing gain is decreased but the error performance is improved through the effect of frequency diversity and the system can be possibility implemented due to the low chip rate.