• 한국환경과학회지
• /
• 제13권2호
• /
• pp.161-165
• /
• 2004

This study has been conducted to develop a new recycling technology of sewage sludge using a carbonization process. The carbonizing yield, the calorific value and EC(electric conductivity) of carbonized sewage sludge had a tendency to be decreased with increase of the carbonizing temperature and time, but pH and the C/N were increased with increase the carbonizing temperature and time. The whole pore volume of carbonized sludge processed in the carbonizing furnace was /g, which was smaller than that in the electric furnace. But, the rates of mesopore and macropore were found to account for 100% therein. Rate of color and organic materials removal for dyeing wastewater were determined 70~97%, 78~83% on cotton yarn, 88~96%, 69~80% on wool wastewater and 77~89%, 77~87% on towel compared with powder activated carbon. Effect of carbonized sludge on chrysanthemum growth was investigated. Plant height and number of leaves was better mixture of carbonized sludge than comparison.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2006년도 추계학술대회
• /
• pp.87-90
• /
• 2006

The experimental study has been done for two kinds of pelletized RDFs to Investigate the carbonization effect to the chlorine concentrations, the heating value and the yield of Produced char in variable conditions of the carbonizing temperature and reaction time. One(RDF-1) is made of 100% wasted plastics and the other(RDF-2) is made of 60% wasted paper with 40% wasted plastics. The screw type carbonizer heated Indirectly by oil burner was used for the experiment and RDF feeding rate was 3kg/hr. The carbonizing temperature was 300, 350 400 and $45^{\circ}C$ and the reaction tine was 5, 10 and 15 minutes respectively. As the increase of carbonizing reaction time and temperature, the chlorine reduction rate was increased and oppositely the yield of char was decreased At the temperature of $400^{\circ}C$ and reaction time of 10 minutes the chlorine reduction rate was 60% and the char yield rate was 80% for the RDF-1 and those of RDF-2 were 80% and 75%, respectively. Additional activation experiment to the char produced from RDF-2 was done in the activation reactor by hot steam supply. As the increase of activation time the iodine number was increased. At the activation time of 20 minutes the iodine number was 552mg/g and the yield of activated carbon was 16%.

• 한국해양환경ㆍ에너지학회지
• /
• 제17권4호
• /
• pp.268-273
• /
• 2014

어판장에서 발생되는 생선 손질 폐기물의 자원화를 목적으로 탄화실험을 실시하였다. 어류폐기물의 원소조성을 살펴본 결과 탄소함량과 수소함량이 각각 51.1%와 7.6%, 산소함량이 30.5%로 나타났다. 특히 질소와 황의 함량이 각각 9.8%와 1.0%로 높아 악취문제 등이 심각할 수 있다는 것을 알 수 있었다. 어류폐기물의 원소조성을 다른 폐기물과 비교해볼 때 탄소 및 수소의 함량이 상당히 높은 것으로 나타나 생선폐기물의 최종처리는 열적처리가 적합한 것으로 나타났다. 고등어, 갈치, 조기를 대상으로 내장이나 몸통, 개별 생선이나 이들을 혼합한 시료 모두에 대하여 탄화실험을 실시한 결과 탄화되는 패턴은 시료 종류에 관계없이 유사한 경향을 나타내었다. 탄화시간에 따른 수율변화는 탄화시간 5분, 10분일 때 탄화온도 변화에 따른 수율 변화가 크게 나타났고, 탄화시간 15분 이후에는 탄화온도 변화에 따른 수율 변화가 미미한 것으로 나타났다. 또한 탄화시간 30분 이상부터는 각 온도별로 시간변화에 따른 수율 변화가 미미한 것으로 나타나 탄화시간에 따른 수율변화는 30분 이상부터는 큰 영향을 미치지 않는 것으로 나타났다. 탄화온도에 따른 차이는 탄화온도 $400^{\circ}C$에서는 1차 휘발이 미미하여 2차 휘발이 일어난 $500^{\circ}C$와의 수율차가 크게 나타났다. 또한 탄화온도를 $600^{\circ}C$, $700^{\circ}C$로 하여 10분 이상 탄화시킨 결과 수율차는 미미한 것으로 나타났다.

• Journal of the Korean Wood Science and Technology
• /
• 제32권4호
• /
• pp.1-7
• /
• 2004

소나무 간벌재로 톱밥보드를 만든 후 우드세라믹을 제조하여 수지함침율 및 소성온도에 따른 우드세라믹의 표면온도의 변화를 조사하였다. 실리콘러버 히터의 표면온도가 증가함에 따라 우드세라믹의 표면온도도 빠른 속도로 증가하였으며, 히터의 설정표면온도가 70℃ 일때 수지함침율 80% 시편의 표면온도는 53.9 ℃이었으며, 소성온도 1,000℃ 조건으로 제조된 우드세라믹의 표면 온도는 54.2 ℃로 가장 높았다. 히터의 표면온도보다 우드세라믹 표면온도의 하강 속도가 느려 우드세라믹이 오랜 시간 열을 유지하고 있음을 알 수 있었다.

• Journal of Biosystems Engineering
• /
• 제37권1호
• /
• pp.36-43
• /
• 2012

Purpose: Drying characteristics of the sliced carrot and green pumpkin were investigated by using the waste heat dryer. Methods: The effects of drying temperature ($T$) and slice thickness affecting drying time were analyzed. Mathematical models for the drying curves were determined with statistical analysis of drying data. Effective diffusivity was determined for the slices of carrot and green pumpkin under various drying conditions. Results: Drying time was reduced at the drying conditions of thinner slice and higher drying temperature. Moisture ratio ($MR$) according to drying time ($t$) was well presented as an exponential function at all of drying conditions for the slices of carrot and green pumpkin with the determination coefficient ($r^2$) of >0.99. The values of effective diffusivity ($D_{ff}$) of the slices for carrot and green pumpkin were increased with increasing the drying temperature. The relationship between Ln($D_{ff}$) and $1/T$ was linear with the determination coefficient ($r^2$) of >0.97. Conclusions: Drying model was well established as an exponential function at all of drying conditions for drying samples.

• 한국의류학회지
• /
• 제25권1호
• /
• pp.124-131
• /
• 2001

To find out the effect of burn out print finishing for better quality of fabric, examined processing which could make less damages on the fiber because the biggest problem is remained fibers damage after burn out print finishing. Fiber damage examined to the condition of finishing material NaHSO$_4$and H$_2$SO$_4$, 3~10min., 100~13$0^{\circ}C$, glycerin. The fiber damages evaluated the break strength and the surface condition by SEM. Among satin, pile fabric which remained fiber is silk, warp knitted fabric which remained fiber is polyester, the fibers damage level were warp knitted fabric$0^{\circ}C$, glycerin and for 6 minutes by NaHSO$_4$. When carbonized by 20%. 50% and 70% to express textile design, carbonizing rate was not effect on the fiber damage very much. There was almost no damages with glycerine, and almost no damages during 3~6minutes fixation time, 10$0^{\circ}C$ steaming heat fixation by NaHSO$_4$and H$_2$SO$_4$. Without glycerine, there were damage by hydrolysis on polyesters surface and the fiver was broken by fixation time.

• Journal of the Korean Wood Science and Technology
• /
• 제35권4호
• /
• pp.9-13
• /
• 2007

소나무로 제조된 톱밥보드를 수지함치율을 달리하여 함침한 후 $650^{\circ}C$로 탄화하여 우드세라믹을 제조하고 통전하여 이들의 전기적 성질 및 표면온도를 측정하였다. 고정저항이 작을수록 낮은 전압으로 통전하여도 우드세라믹의 표면온도가 높음을 알 수 있었으며, 저항이 클수록 표면온도를 $70^{\circ}C$ 이상 올리기 위해서는 전압을 높게해야 할 것으로 판단된다. 또한 전압을 높게 했을 때 우드세라믹에 흐르는 전류, 전력 및 표면온도는 높게 나타났으며, 동일 전압 하에서는 목표온도가 높을수록 도달시간, 전류 및 전력을 증가하였다.

• 공업화학
• /
• 제9권6호
• /
• pp.798-802
• /
• 1998

탄소제립물은 야자각 분말을 coal tar 용액과 혼합시켜 성형한 후, 이를 여러 가지 온도에서 탄화시켜 제조하였다. 탄소제립물의 미세공 조절을 위하여 질소분위기에서 벤젠 증착시간을 변화시켰다. 여러 가지 시료에 대해서 SEM을 이용하여 얻은 Morphology와 진밀도를 비교하였고 Cahn D-200장치를 이용한 산소 및 질소의 흡착속도를 측정하여 가스의 확산계수, 분리계수 및 흡착평형량을 얻었다. 흡착특성 결과의 분석을 통해 분자체 제조에 적합한 탄화온도와 변형시간은 각각 $800^{\circ}C$와 10분이며, 이때 산소와 질소의 분리계수는 26.4임을 알 수 있었다.

• Biomolecules & Therapeutics
• /
• 제11권4호
• /
• pp.249-256
• /
• 2003

Pyroligneous liquid(PL) is produced by carbonizing Oak in 350-40$0^{\circ}C$. It is traditionally used for treating stress-related disorder, hepatic disease, immune disorder, G-I disorder and inflammatory disease. The aim of this study is to investigate anti-stress effects of PL. The experiments were performed with the use of young(9 weeks of age) male rats of SD strain and the male ICR mice (20-25 g). Animals of the normal group were not exposed to any stress and the control group were exposed to stress. The rats of the Ginseng, diazepam(BZ) and PL supplementary group were orally administered once a day 100 g of Ginseng extract-kg body weight, 5 mg of BZ/kg body weight and 1 ml of PL100 g body weight and then exposed to stress. The mice of the Ginseng, BZ and PL supplementary group were given water containing 100 g of Ginseng extract/100 ml potable water, 5 mg of BZ/kg 100 ml of drinking water and 10 ml of PL/100 ml of drinking water and exposed to stress. Animals were given materials for 7 days after stabilizing them, and then were given supplementary materials for 5 days with stress. They were stressed by immobilization for 30 minutes and then the animals were exposed to electroshocks for 5 minutes. We recorded stress-related behavioral changes of experimental animals by stressing them using the Etho-vision system and measured the levels of corticosterone in blood While stress suppressed locomotor activity of animals, PL-supplementation partially blocked the stress effect of locomotion in rats and mice, and also partially blocked stress-induced behavioral changes such as freezing, burrowing, smelling and rearing activity in rats and freezing, grooming, tailing and rearing in mice. The staying time of stressed rats and mice in open area decreased and in closed area it increased relatively in elevated plus maze test. However, these changes also partially were blocked by PL-supplementation. PL-supplementation decreased levels of blood corticosterone increased by stress in rats. These results suggest that PL protects partially the living organism from stress attack in some cases.