• 자원리싸이클링
• /
• 제19권3호
• /
• pp.16-23
• /
• 2010

최근 고유가 시대로 접어들면서 연탄의 사용량이 급격하게 증가하고 있어 이때 발생되는 연탄재의 친환경적인 순화자원화 기술개발이 필요하게 되었다. 연탄재에는 가연성분인 미연탄소와 고온열적특성이 우수한 뮬라이트 성분이 다량 함유되어 있어 소성 에코벽돌의 원료로 적합하다고 판단된다. 이 연구의 목적은 연탄재에 함유되어 있는 미연탄소가 소성 에코벽돌의 특성에 어떠한 영향을 미치는 가를 파악하는데 있었다. 미연탄소 함량 10.5 wt%인 연탄재 50 wt%와 폐유리 50 wt%의 배합비율로 제조한 에코벽돌을 $950^{\circ}C$로 소성한 시험체의 압축강도는 소성 점토벽돌 국내규격(KS L 4201)의 1종 규격에 해당하였다. 특히, 미연탄소 함량이 1.0 wt%인 연탄재의 배합비율을 70 wt%까지 증가시켜 제조한 소성 에코벽돌 시험체의 압축강도는 소성 점토벽돌 1종 규격에 해당하였다.

• 공업화학
• /
• 제16권3호
• /
• pp.337-341
• /
• 2005

본 논문은 니켈이 담지된 촉매를 이용하여 메탄의 이산화탄소 개질반응에서 발생하는 탄소퇴적의 속도와 반응온도에 따른 카본생성 경로를 연구하였다. 개질 반응이 진행되는 동안 촉매 위에 발생하는 탄소퇴적과 그 속도측정을 위한 반응장치로는 열분석기를 이용하였다. 메탄의 이산화탄소 개질반응에서 반응기체 조성을 달리하여 실험한 결과 코크형성의 반응차수가 1.33($CH_4$)과 -0.52($CO_2$)임을 확인하였다. 또한, 탄소퇴적속도를 이용한 모델식을 근거로 반응온도에 따른 반응속도인자를 계산한 결과 $600^{\circ}C$ 미만에서는 메탄의 분해반응만이 주로 발생하며 $600{\sim}700^{\circ}C$ 사이에서는 메탄의 분해반응과 더불어 이산화탄소 해리반응이 동시에 진행됨을 알았다.

• Elastomers and Composites
• /
• 제20권1호
• /
• pp.13-24
• /
• 1985

It is generally agreed that strong linkages exist between rubber chains and reinforcing filler particles. The purpose of this study is to examine the effect of rubber-filler attachments on the various mechanical properties of the rubber. In particular, the modulus and strength will be altered by these attachments. For this study, the curing properties are examined by means of ODR (Oscillating Disk Rheometer), the physical properties by means of Instrong. The results of this study can be summarized as follows. In the ODR test, the carbon black filled stock has shorter scorch time than gum stock and, the silica and clay filled stock has longer scorch time than gum stock. In the modulus, ten sile and swelling properties, the vulcanizates filled with carbon black had higher those values than inorganic filler loaded NR vulcanizates, but the rebound rate showed that the silica filled NR vulcanizates was lower than other inorganic filler contained NR vulcanizates and the ISAF filled NR vulcanizates was lower than other carbon block contained NR vulcanizates.

• Elastomers and Composites
• /
• 제32권5호
• /
• pp.295-301
• /
• 1997

The effects of filler types and compositions on the final properties such as tensile strength, % elongation, hardness, and specific gravity of chloroprene rubber were investigated. The fillers involved in this investigation were HAF-type carbon black, Mistron, and white clay, For each filler, the variation of filler compositions gave almost the linear effects on the all properties investigated. For a fixed filler composition, different filler types gave different influential strength on rubber properties. After linearlization of experimental data with respect to each filler composition, the simple linear addition of each property with respect to filler compositions was applied to predict the final properties of the filler included rubber systems. For the chloroprene rubber system including the fillers composed of Mistron(25phr)/HAF(20phr)/clay(35phr), the predicted properties were well in accordance with the experimental results. Similar results were obtained for other additives such as processing oil and accelerator.

• 한국세라믹학회지
• /
• 제50권2호
• /
• pp.149-156
• /
• 2013

This study examines the effects of limestone's factors on the fluidity of cement paste when of up to 15%. As the substitution ratio of limestone powder increases, the fluidity of the paste is also improved; however, it has no correlation to the $CaCO_3$ content of the limestone, fineness of the limestone, and fluidity of the pastes. Regardless of clay content of the limestone, it showed a similar mini-slump, so there was no correlation between the clay content and the fluidity of the paste. Also, the total organic carbon content of the limestone and the fluidity of the paste showed no correlation. Regardless of the limestone's grade or fineness, n value of powder gained by using the Rosin-Rammler distribution function showed that the fluidity of the paste increased as the n value reduced. It was also shown that particle size distribution of ordinary Portland cement with limestone powder had a major effect on the fluidity of the paste.

• Journal of the korean society of oceanography
• /
• 제32권3호
• /
• pp.128-137
• /
• 1997

This study presents results from a detailed sedimentological investigation of surface sediments obtained from the Korea Strait region, the southern part of the East Sea (Sea of Japan). The distribution of different types of bottom sediments is controlled by the recent fine-grained sediment transport and deposition combined with the lowerings of sea level during the last glacial period, forming a diverse mixture of organic-rich fine-grained and shelly coarse-grained sediments. In comparison to high organic concentration of fine-grained sediments in the inner continental shelf and slope areas, the shell-rich coarse-grained sediments on the outer shelf are discernible being further modified. These coarse-grained sediments are confirmed as relict resulting from the sediment dynamics during the lower sea levels of the last glacial period. Clay mineral distribution of the fine-grained sediments gives information about the transport mechanism. Presence of present-day current system (the Tsushima Warm Current) is most probable source for the fine-grained particles into the open East Sea from the East China Sea, indicating that Holocene sediment dynamics may be used to explain the observed distribution of surface coarse-grained shell-rich sediments.

• 한국결정성장학회지
• /
• 제17권6호
• /
• pp.277-282
• /
• 2007

화력발전소에서 발생하는 석탄 바닥재(bottom ash)와 점토를 혼합하여 성형 후, 소성하여 인공경량골재를 제조하고, 소성온도와 조성 변화에 따른 물성을 분석하였다. 바닥재는 입경이 4.75mm 이상인 입자가 13wt% 정도로 거친 분말로 압출성형을 위하여 미분쇄 공정이 필요하였다. 또한 바닥재는 미연탄소(C)를 다량 함유하고 있어 소결 시 C의 산화반응과 이에 따른 가스발생으로 소결체의 경량화를 유도하였다. 점토에 바닥재 첨가량이 증가할수록 소성 지수가 감소하였고 이에 따라 성형체의 성형성이 저하되었으나 바닥재 첨가량이 40wt% 까지의 성형체는 소성 지수 및 소성 한계값이 각각 약 10과 22로서 압출성형이 가능하였다. 바닥재가 $30{\sim}50wt%$ 첨가되고 $1150{\sim}1200^{\circ}C$ 범위에서 소결된 골재는 부피비중 $1.3{\sim}1.5$, 흡수율 $14{\sim}16%$를 나타냈고 따라서 고층빌딩이나 교량 등의 골재대체재로써의 가능성이 확인되었다.

• 한국지반공학회논문집
• /
• 제20권5호
• /
• pp.49-58
• /
• 2004

시화지역 퇴적층의 퇴적환경을 분석하여 압밀특성을 연구하였다. 퇴적환경은 입도분석, 퇴적구조, 지화학특성, 간 극수 화학분석, 탄소동위원소분석을 통해 분석하였으며 조사지점에서 연속적으로 채취한 불교란 시료에 대해 압밀시험과 이방압밀삼축시험(CKoUC)을 수행하여 과압밀현상을 조사하였다. 퇴적환경 분석 결과 상부의 실트/점토 혼합층은 해성환경에서 퇴적되었으며 하부의 모래층과 점토층은 하성환경에서 퇴적된 것으로 밝혀졌다. 해성퇴적층에서는 실트와 점토의 수평층리에 의한 퇴적구조가 우세하게 나타난다. 해성퇴적층 내에서 지질학적 침식이 발생했다는 뚜렷한 증거가 없음에도 불구하고 상부 해성퇴적층의 과압밀비는 1보다 크게 나오고 있다. 상부 해성퇴적층은 삼축 응력경로에서 정규압밀 점토와 동일한 거동을 보이며, 응력상태선도에서도 지질학적 의미의 정규압밀 영역에 도시된다. 해성퇴적층의 이러한 겉보기 과압밀 현상은 퇴적속도의 차이에 의해 발생되는 연약층의 구조, 즉 입자간 화학적 결합력에 의해 발생된 것으로 설명할 수 있다.

• 한국세라믹학회지
• /
• 제47권6호
• /
• pp.583-589
• /
• 2010

In this paper, the properties of reclaimed ash(RA) from various domestic thermal power plants(S, D and H) were analyzed, and the possibility of fabricating the artificial lightweight aggregate(ALA) using RA was studied. The chemical compositions of RA are similar to the clay, but it had higher concentrations of alkali earth metal oxides(CaO, MgO) and unburned-carbon. The TCLP(Toxicity Characteristic Leaching Procedure) results showed that the dissolution concentrations of heavy metal ions of RA were below the limitation defined by the enforcement regulation of wastes management law in Korea. The results of IC analysis showed that leaching concentration of $Cl^-$ ion was 124 ppm for RA of HN and ${SO_4}^{2-}$ ion was leached a few hundreds ppm for all RA in this study. The ALAs with various mass ratio of clay to reclaimed ash(RA:Clay = 7:3, 6:4, 5:5, 4:6, 3:7) were sintered with a electric muffle furnace at the temperature of $1050{\sim}1200^{\circ}C$. The specific gravity and water absorption(%) of the sintered ALAs were 1.1~1.8 and 10~30% respectively. The ALA sintered in the rotary kiln at $1125^{\circ}C$ showed a bulk density of 1.7 and water absorption of 15.2%.

• 한국조경학회지
• /
• 제30권5호
• /
• pp.107-115
• /
• 2002

This study was carried out to compare artificial soil formulated by blending calcined clay and coconut peat with perlite, then to evaluate this soil as a perlite substitute for use as an artificial planting medium. To achieve this, a determination of the physico-chemical properties and it's effect on plant growth were conducted by comparing those with large perlite grains and small grains. The results are summarized as follows: 1) The bulk density was 0.41g/㎤. This density was lower than that of field soil, but higher than that of large perlite grain(0.23g/㎤) and small grain(0.25g/㎤). The porosity, field capacity, and saturated hydraulic conductivity were 71.3%, 49.2%, and 3.8$\times$10-2cm/s, respectively. The air-permeability, water holding capacity, and drainage were better than or equal to that both large and small perlite grain. 2) It was near-neutral in reaction(pH=6.6). It had a high organic carbon content(65.8g/kg) and a low available phosphoric acid content(84.7mg/kg). It was similar to crop soil in cation exchange capacity(11.4cmol/kg). It had a low exchangeable calcium content(0.71cmol/kg), a low exchangeable magnesium content(0.68cmol/kg), a high exchangeable potassium content(2.54cmol/kg), and a high exchangeable sodium content(1.12cmol/kg). Except for the exchangeable potassium and sodium content, the chemical properties were better than or equal to both large and small grain perlite. The excessive exchangeable potassium or sodium content will inhibit plant growth. 3) In Experiment 1, the plant growth tended to be higher compared to that of large and small perlite gains. But in Experiment 2, it tended to be lower. This might be linked to the excessive exchangeable potassium or sodium content. 4) It could be considered as a renewable perlite substitute for greening of artificial soil. But, it would be necessary to leach the excessive exchangeable potassium or sodium to avoid the risk of inhibiting plant growth.