• Journal of Ocean Engineering and Technology
• /
• v.13 no.4 s.35
• /
• pp.63-74
• /
• 1999

This study has been investigated about the influence of moisture environment on the mechanical properties in the carbon fiber cross laminates. And it has been also investigated the effect of unit ply thickness of the carbon fiber cross laminates on the mechanical properties in distilled water of $80^{\circ}C$ for a certain period of time. As a results, it was found that the weight gain of water was increased with the immersion time and the bending strength and fracture toughness were decreased with the weight gain of water. And it was also shown that the bending strength and fracture toughness were decreased with the increasing of the unit ply thickness of carbon fiber cross laminates through the immersion time.

• Journal of environmental and Sanitary engineering
• /
• v.13 no.2
• /
• pp.156-164
• /
• 1998

This study was performed to select media for the development of biological activated carbon process. Using activated carbon made by Norit, Calgon, Samchully Co., removal efficiency of humic acid by the isothermal adsorption test and biodegradation of organic matters by microbes attached to BAC and observation and counting of microbes attached to BAC were examined. The removal efficiency of humic acid with dose of activated carbon was influenced by initial concentration. Compared with other activated carbon, Norit was found to be most effective in view of adsorption capacity, biodegradation of organic matter, and attachment characteristics of microorganism. In conclusion, Norit which has high adsorption capacity and good biodegradation of organic matter was recommended for selecting media in BAC process.

• Journal of Industrial Technology
• /
• v.16
• /
• pp.13-24
• /
• 1996

This research aims to investigate the effects of an internal carbon source in the denitrification of piggery wastewater. In this study, the raw wastewater and the effluent from each of anoxic basin and anaerobic basin were used as the internal carbon sources. The experiments were carried out in batch system and the results are as follows ; i) Denitrification rates were the highest in the raw wastewater and the lowest in the anaerobic effluent. ii) The piggery wastewater contained about 60 percent of the readily biodegradable organic(RDCOD), which led to a conclusion that the raw wastewater could be used as the internal carbon source for the denitrification. For the efficient denitrification, pre-denitrification process was found profitable. iii) In denitrification, alkalinity production rates were in the range of 3.4 to $3.6mgCaCO_3/mgNO_3-N$. iv) The denitritation of piggery wastewater came out to be possible, and the rate of organic carbon consumption decreased about 10 percent.

• Journal of the Korean Applied Science and Technology
• /
• v.28 no.2
• /
• pp.225-231
• /
• 2011

The electrochemical characteristics of electric double layer capacitor(EDLC) were investigated using various carbon materials. The physical properties such as specific surface area and mean pore size of activated carbon were analyzed by BET. The results of the activated carbon used for electrode material showed that the specific surface areas varied from 600 to 1500 $m^2$/g and mean pore sizes from 1.74 to 2.88 nm. A maximum specific capacitance of 0.30 F/$cm^2$ was obtained for the activated carbon with the highest specific surface area and ionic conductivity. Also, it was found that the electrochemical results of the cyclic charge-discharge tests were stable.

• Economic and Environmental Geology
• /
• v.50 no.6
• /
• pp.537-544
• /
• 2017

Stable carbon isotope ratio of carbon dioxide (${\delta}^{13}C_{CO2}$) is used as an important indicator in the researches for global climate change and carbon capture and sequestration technology. The ${\delta}^{13}C$ value has been usually analyzed with Isotope Ratio Mass Spectrometer (IRMS). Recently, the use of Laser Absorption Spectrometry (LAS) is increasing because of the cost efficiency and field applicability. The purpose of this study was to suggest practical procedures to prepare laboratory reference gases for ${\delta}^{13}C_{CO2}$ analysis using LAS. $CO_2$ gas was adjusted to have the concentrations within the analytical range. Then, the concentration of $CO_2$ was assessed in a lab approved by the Korea Laboratory Accreditation Scheme and the ${\delta}^{13}C_{CO2}$ value was measured by IRMS. When the instrument ran over 12 hours, the ${\delta}^{13}C$ values were drifted up to ${\pm}10$‰ if the concentration of $CO_2$ was shifted up to 1.0% of relative standard deviation. Therefore, periodical investigation of analytical suitability and correction should be conducted. Because ${\delta}^{13}C_{CO2}$ showed the dependency on $CO_2$ concentration, we suggested the equation for calibrating the concentration effect. After calibration, ${\delta}^{13}C_{CO2}$ was well matched with the result of IRMS within ${\pm}0.52$‰.

• Korean Journal of Materials Research
• /
• v.13 no.5
• /
• pp.333-337
• /
• 2003

We report a new fabrication process for carbon nanotube field emitters with high performance. The key of the fabrication process is trim-and-leveling the carbon nanotubes grown in trench structures by employing a planarization process, which leads to a uniform distance from the carbon nanotube tip to the electrode. In order to enable this processing, spin-on-glass liquid is applied over the CNTs grown in trench to have them stubborn adhesion among themselves as well as to the substrate. Thus fabricated emitters reveal an extremely stable emission and aging characteristics with a large current density of 40 ㎃/$\textrm{cm}^2$ at 4.5 V/$\mu\textrm{m}$. The field enhancement factor calculated from the F-N plot is $1.83${\times}$10^{5}$ $cm^{－1}$ , which is a very high value and indicates a superior quality of the emitter originating from the nature of open-tip and high stability of the carbon nanotubes obtained new process.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.55-55
• /
• 2011

질소 등을 GST225 상변화재료에 첨가시켜 비저항을 증가시킴으로서 PCRAM의 동작 전류를 감소시킨 연구가 선행된 바 있다. 본 연구에서는 GST225와 달리 고속 동작 특성을 갖는 것으로 널리 알려진 Ge-doped SbTe (GeST) 상변화 재료에 Carbon을 첨가하여 박막 특성을 연구하여 동작 전류 감소의 가능성을 타진하였다. 실험을 위한 박막 제작을 위해 2 inch size의 GeST 및 C doped GeST (C-GeST) single target을 이용하여 RF magnetron co-sputtering 하였다. 박막은 carbon이 첨가되지 않은 GeST와 carbon 첨가량이 늘어나는 순서로 C-GeST 1, C-GeST 2, C-GeST 3로 구성된다. 이 때 제작한 박막의 composition analysis를 위해 XRF/RBS/AES가 사용되었고 제작된 박막의 기본적인 특성평가를 위해 resistivity(${\rho}$)와 crystallzation temp.(Cx), surface morphology(AFM), x-ray diffraction pattern(XRD)를 측정하였다. 실험결과 GeST, C-GeST 1, C-GeST 2, C-GeST 3 박막의 Cx는 각각 209, 225, 233, $245^{\circ}C$로 측정되어 carbon 첨가량이 증가됨에 따라 결정화 온도가 증가되는 것을 알 수 있었다. 또한 ${\rho}$도 마찬가지로 annealing 온도를 약 $320^{\circ}C$로 할 경우 ${\rho}$(as-dep)와 ${\rho}$(crystalline) 모두 0.03 / $2.61*10^{-6}$, 0.08 / $7.93*10^{-6}$, 0.09 / $11.99*10^{-6}$, 0.13 / $13.49*10^{-6}{\Omega}{\cdot}m$로 증가하였다. 증가된 ${\rho}$의 원인이 박막의 grain size의 감소라고 단언 할 수는 없으나 AFM 측정결과 grain이라고 추측되는 박막 feature들의 size가 점차 감소하는 것을 확인하였다.

• Journal of Fisheries and Marine Sciences Education
• /
• v.20 no.1
• /
• pp.58-67
• /
• 2008

Seasonal variations in carbon dioxide in the air and soil organic carbon in the sediments were monitored at the constructed wetland formed by reclamation work at Goheung Bay. Sediment sampling in the constructed wetland and carbon dioxide measurement in the air were conducted on June 16 and August 23, 2007. Sediments in the constructed wetland were sampled at 11 different points (June 16) and 14 points (August 23), while carbon dioxide in the air was measured at 13 points (June 16) and 15 points (August 23). Water content and organic carbon in the sampled sediments were analyzed in the laboratory. Water content of the sediments was higher than that of general soil, and the variation between June and August was not evident. The amounts of organic carbons in the sediments sampled on August 23 were higher than those sampled on June 16. Also, there was more organic carbon in the sediments sampled at the field of reeds than in the pure wetland area. Daily maximum variation in carbon dioxide in the air was higher on June 16, but the amount of carbon dioxide in the air was greater on August 23. The results of the study suggest that organic carbon in the sediments and carbon dioxide in the air were greater in summer (August 23) than in spring season (June 16) in the constructed wetland at Goheung Bay.

• Journal of Radiopharmaceuticals and Molecular Probes
• /
• v.1 no.2
• /
• pp.88-94
• /
• 2015

The KOTRON-13 cyclotron was manufactured by Samyoung Unitech as the second generation of the KIRAMS-13 cyclotron after its technology was transferred from the Korea Institute of Radiological and Medical Sciences in South Korea. Its prototype was installed at Seoul National University Bundang Hospital as part of a distributed network of regional cyclotrons with the support of a grant from the National Research Foundation of Korea. However, its initial condition has limited capacity to extract a relatively low beam current and to produce carbon-11. In this review, we provide an introduction and overview of the current state of the KOTRON-13 cyclotron, which was successfully upgraded by carrying out various modifications and optimizing the carbon-11 target system.

• Mass Spectrometry Letters
• /
• v.13 no.4
• /
• pp.139-145
• /
• 2022

Protein glycosylation is a common post-translational modification by non-template-based biosynthesis. In fungal biotechnology, which has great applications in pharmaceuticals and industries, the importance of research on fungal glycoproteins and glycans is accelerating. In particular, the importance of quantitative analysis of fungal glycans is emerging in research on the production of filamentous fungal proteins by genetic modification. Reliable mass spectrometry-based techniques for quantitative glycomics have evolved into chemical, enzymatic, and metabolic stable isotope labeling methods. In this study, we intend to expand quantitative glycomics by metabolic isotope labeling of glycans in Aspergillus niger, a filamentous fungus model, by the MILPIG method. We demonstrate that incubation of filamentous fungi in a culture medium with carbon-13 labeled glucose (1-¹³C₁) efficiently incorporates carbon-13 into N-linked glycans. In addition, for quantitative validation of this method, light and heavy glycans are mixed 1:1 to show the performance of quantitative analysis of various N-linked glycans simultaneously. We have successfully quantified fungal glycans by MILPIG and expect it to be widely applicable to glycan expression levels under various biological conditions in fungi.