• Elastomers and Composites
• /
• v.46 no.2
• /
• pp.138-143
• /
• 2011

EPDM compounds and vulcanizates containing inorganic filler such as talc, calcium carbonate, or clay as well as carbon black were prepared, and the influence of inorganic filler on properties of the EPDM compounds and vulcanizates were investigated. The bound rubber contents did not significantly increase even though the inorganic filler was added. There were big aggregates in the EPDM samples with high loading inorganic filler. By adding the inorganic filler, the cure times tended to increase and the delta torque decreased. The modulus were on the whole decreased, whereas the elongation at break, tensile strength, and tear strength were increased by adding the inorganic filler. The decreased modulus and increased elongation at break can be explained with the decreased delta torque, the increases of tensile strength and tear strength can be explained with the increased elongation at break. By adding the inorganic filler, level of reinforcing in the EPDM compounds did not increase and the crosslink density decreased.

• Korean Journal of Materials Research
• /
• v.14 no.11
• /
• pp.807-812
• /
• 2004

The uniformity of emission mage and field emission properties of carbon nanotube(CNT) cathodes dependence on CNT particle dispersion were investigated for field emission displays. We used multi-walled carbon nanotubes (MWNTs) synthesized by CVD method as the field emitter materials. CNT dispersion in CNT ink was carried out by ultrasonication and shaking methods. According to CNT dispersion conditions, the uniformity of emission image and field emission properties of CNT cathodes were greatly affected. The smaller particles of filler materials and CNT powders provide the better properties of the CNT cathodes.

• Elastomers and Composites
• /
• v.35 no.2
• /
• pp.132-137
• /
• 2000

The cure and physical properties of EPDM foam containing ground rubber and carbon black as filler were studied. The cure time reduced with the addition of filler. This result means reducing the operation time. In case of ground rubber was used, blowing ratio, tensile strength, and elongation were decreased rapidly at above 30 phr. On the other hand, in case of carbon black, they showed similar physical properties until 70 phr was used limited to 30 phr to make a good foam, which should be due to low interfacial interaction between EPDM and ground rubber. All the EPDM foams showed excellent thermal stability.

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 2003.10a
• /
• pp.351-354
• /
• 2003

최근 안전 분야에서 기능성 고분자 재료의 응용분야로서 첨단 전기전도성 고분자복합재료를 이용한 섬유상, 구형, flake 등 각종 형상의 금속, 흑연, carbon black, whisker 등의 전도성 filler를 고분자 matrix에 혼입하여 전도성 고분자를 성형가공하여 복합성형체를 제조하고 electrical hazard를 감소시키기 위한 정전기방지효과, 자기발열체, 전자기파 차폐효과 등의 특성을 나타내는 고분자 성형체상으로 가공된 소재로 화학공장, 산업설비, 각종 제조설비의 제조 공정용 제어, 과전류차단 및 외부 전자기파에 의해 발생되는 이상작동 등을 방지하는 안전시스템 소재용으로서 다양하게 사용되고 있다.(중략)

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2005.05a
• /
• pp.91-91
• /
• 2005

• Polymer(Korea)
• /
• v.25 no.3
• /
• pp.367-374
• /
• 2001

The electromagnetic interference (EMI) shielding effectiveness (SE) of poly(vinylidene fluoride) (PVDF) composites was investigated using carbon nanofiber fillers prepared by catalytic chemical vapor deposition of various carbon-containing gases over Ni and Ni-Cu catalysts. The electrical conductivity of carbon nanofiber which was regarded as the key property of filler for the application of EMI shielding ranged from 4.2 to 22.4 S/cm at a pressure of 10000 psi. The electrical conductivity of carbon nanofiber/PVDF composites ranged from 0.22 to 2.46 S/cm and the EMI SE of those was in the range of 2∼13 dB. The electrical conductivity of carbon nanofibers increased with the increase in heat treatment temperature and time, while the electrical conductivity of the composites increased rapidly at the initial heat treatment and then approached a certain value with the further increase of heat treatment. The SE of the composites showed a maximum at the medium heat treatment and was proportional to the electrical conductivity of the composites. It was concluded that the specific surface area of carbon nanofibers decreased with the continual heat treatment and the specific surface area of filler was an important factor for the SE of the composites.

• Elastomers and Composites
• /
• v.33 no.1
• /
• pp.17-26
• /
• 1998

Natural rubber was filled with 8 commercial carbon blacks covering range of rubber-grade products at different levels of filler loadings in order to investigate physical compound and vulcanizate properties. It was found that the curves of rubber property vs filler loading of both uncured compounds and vulcanizates can be superposed to one single master curve by introducing an effective volume fraction which is based on CDBP. The effective volume fraction, $V_{EFF}$ was utilized to explain the variation of the stiffness of all rubber compounds. The surface area-corrected effective volume fraction, V', was utilized to explain the formation of bound rubber, rebound and lambourn wear.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.11a
• /
• pp.180-183
• /
• 2009

Composite bipolar plates offer several advantages of low cost, light weight, and ease of manufacturing compared to traditional graphite plate. However, it is difficult to achieve both high electrical conductivity and high flexural strength. In this study, the hybrid carbons filled epoxy composite bipolar plates were fabricated to test electrical conductivity and flexural properties. Graphite powders were used as the main conducting filler and continuous carbon fiber fabrics were inserted to improve the mechanical properties of the composite. This hybrid composite showed improved in-plane electrical conductivity and flexural property. The moldability of the hybrid composite was also improved comparing to the continuous prepreg composite. This study suggested that the continuous carbon fiber inserted graphite/epoxy composites can be a potential candidate material to overcome the disadvantages of conventional graphite composite or continuous prepreg composite bipolar plates.

• Proceedings of the KWS Conference
• /
• 1995.10a
• /
• pp.27-29
• /
• 1995

• Polymer(Korea)
• /
• v.37 no.4
• /
• pp.494-499
• /
• 2013

Modified polypropylene (m-PP) was fabricated by furfuryl sulphide (FS) as branching agent and m-PP/nano-filler composites were prepared with silicate and multi-walled carbon nanotube (MWCNT), using a twin screw extruder. The chemical structures and thermal properties of the m-PP were investigated by FTIR and DSC. The chemical structure of the m-PP was confirmed by the existence of =C-H stretching peak of the branching agent at 3100 $cm^{-1}$. There was no district change in melting temperature in case of m-PP, but a certain increase in crystallization temperature was notified and the increase was in the range of $10-20^{\circ}C$. The rheological properties, filler dispersion and foaming behaviors of the m-PP/nano-filler composites were investigated by dynamic rheometer, X-ray diffractometer (XRD) and scanning/transmission electron microscope (SEM/TEM). m-PP/nano-filler composites showed a high complex viscosity at a low frequency, an increase in melt elasticity, and a high shear thinning effect. Compared to pure PP, m-PP and m-PP/nano-filler composites were sufficient to enhance the foaming behavior.