• 공업화학
• /
• 제27권2호
• /
• pp.179-184
• /
• 2016

본 연구에서는 미분쇄 탄소섬유/카본블랙/천연고무 복합재료의 미분쇄 탄소섬유 방향이 기계적 특성에 미치는 영향을 알아보았다. 복합재료는 6 phr 미분쇄 탄소섬유와 40 phr 카본블랙을 천연고무에 첨가하였고 2축-롤-밀 장비를 이용하여 복합재료 내의 미분쇄 탄소섬유를 수직, 수평으로 정렬방향을 제어하였다. 기계적 특성은 인장특성, 인열강도를 통해 고찰하였다. 실험 결과, 인장강도, 100%~300% 모듈러스, 인열강도는 미분쇄 탄소섬유가 수직으로 배향되었을 때 그렇지 않았을 때보다 증가하였고 미분쇄 탄소섬유를 정렬하지 않은 복합재료의 기계적 물성은 감소하였다. 결과적으로, 복합재료 내에서 미분쇄 탄소섬유가 수직으로 배향되었을 때 인장특성과 인열강도의 증가로 이어진 결과이며, 이러한 결과는 탄성력이 우수한 미분쇄 탄소섬유의 존재가 기인하였기 때문이라고 판단된다.

• Carbon letters
• /
• 제10권2호
• /
• pp.101-108
• /
• 2009

Various silanes, amino silane, vinyl silane, TESPD, and ZS (TESPD/zinc soap complex), are added into chlorinated isobutylene-isoprene copolymer (CIIR)/hard clay/carbon black (CB) compound and they are investigated with respect to the vulcanization characteristics, the processability, and the mechanical properties. In hard clay/CB filled system, only ZS silane added compound shows both lower Mooney viscosity and extrusion torque while vinyl silane added compound showed only a lower extrusion torque. All the ZS added compounds showed the lowest viscosity among them. The silane added compounds showed an increased modulus. In 'fatigue to failure' count test, the ZS added compound showed superior counts compared to other silane (amino, vinyl, TESPD) added compounds. The mechanical properties were significantly increased when the S2 and ZS were added into CIIR/hard clay/CB compound. The ZS added compounds showed a significant improvement on elongation modulus.

• Elastomers and Composites
• /
• 제33권1호
• /
• pp.44-51
• /
• 1998

The purpose of this experiments were investigated on the physical properties of rubber com-pounds containing two types carbon black. Bound rubber and interaction coefficient for com-pounds with pure carbon black were higher than those for the compounds with dual phase carbon black. Slightly higher values in 300% modulus and tensile strength indicated that the ratio of rubber-filler bound to rubber-rubber bound of pure carbon black were higher than those of com-pounds with dual phase carbon black. It was founded that dynamic properties, that is rebound, heat build-up, 0 & $60^{\circ}C$ tan $\delta$, and cut and chip loss of compounds with dual phase carbon black were better than those of compounds with pure carbon black, but abrasion property of dual phase carbon black was lower than those of pure carbon black because of low reinforcing ability.

• 한국환경농학회지
• /
• 제7권2호
• /
• pp.136-145
• /
• 1988

도시폐기물의 퇴비화 과정중 퇴비중의 탄소화합물 함량을 시기별로 조사한 결과 다음과 같다. 1. 유기물, 섬유소, 총 탄소, 유기탄소, 미생물 분해가능 탄소 함량은 퇴비화에 따라 감소되었고 리그닌, 미생물 이용 불가능 탄소함량은 약간 증가 되었다. 2. 총 탄소와 미생물 분해가 가능 탄소 함량과 차이는 6.2% 였다. 3. 유기물질의 실제 분해율은 분해율보다 큰 증가 현상을 보였다. 4. 모든 탄소화합물의 실제 분해 능력은 분해능력과 유사하였다. 5. 리그닌의 분해율 및 분해능력은(-)값을 보였으나, 실제 분해율 및 실제분해 능력은(+)값을 가졌다. 6. 퇴비중 유기물, 섬유소, 총탄소, 유기탄소, 미생물 이용 가능 탄소간에 고도의 유의성있는 정의 상관이있었다. 7. 미생물 분해불가능 탄소와 유기물, 섬유소, 총 탄소 유기탄소 및 미생물 분해가능 탄소와는 부의 상관이 있었다. 8. 퇴비중 리그닌과 미생물에 분해 불가능 탄소와도 고도의 정의 상관이 있었다.

• Carbon letters
• /
• 제8권3호
• /
• pp.207-213
• /
• 2007

The properties and electrochemical characteristics of anode material using pitch-coated graphite residue compounds by heat-treatment at $600^{\circ}C$ for 1 hour were investigated. The distance of layers of pitch-coated graphite residual compounds was 3.3539 ${\AA}$, which was as same as that of graphite. Its electrochemical and charge discharge characteristics were tested according to different four types of carbon material, natural graphite, pitch-coated graphite, amorphous graphite and pitch-coated graphite residual compounds, respectively. So it was shown the best charge-discharge characteristics in all of the samples. For the electrochemical and charge-discharge characteristics, although pitch-coated graphite residual compounds had different carbon contents 70% and 80%, these two samples were shown good electrochemical and charge-discharge characteristics.

• Carbon letters
• /
• 제10권2호
• /
• pp.109-113
• /
• 2009

Various silanes, amino silane, vinyl silane, TESPD, and ZS (TESPD/zinc soap complex), are added into chlorinated isobutylene-isoprene copolymer (CIIR)/soft clay/carbon black (CB). The vulcanization characteristics, the processability, and the mechanical properties are measured. In soft clay/CB filled CIIR system, there are no significant changes in Mooney viscosity among compounds. Vinyl silane added compound shows a low extrusion torque. All the silane added compounds shows an increased modulus. The mechanical properties are significantly increased when the S2 is added into CIIR/soft clay/CB compounds.

• Bulletin of the Korean Chemical Society
• /
• 제22권4호
• /
• pp.367-371
• /
• 2001

Lithium inserted into artificial carbon has been synthesized as a function of the Li concentration. The characteristics of these prepared compounds were determined from the studies using X-ray diffraction(XRD), solid nuclear magnetic resonance (NM R) spectrophotometric and differential scanning calorimeter(DSC) analysis. X-ray diffraction showed that lower stage intercalation compounds were formed with increasing Li concentration. In the case of the AG3, most compounds formed were of the stage 1 structure. Pure stage 1 structural defects of artificial graphite were not observed. 7Li-NMR data showed that bands are shifted toward higher frequencies with increasing lithium concentration; this is because non-occupied electron shells of Li increased in charge carrier density. Line widths of the Li inserted carbon compounds decreased slowly because of nonhomogeneous local magnetic order and the random electron spin direction for located Li between graphene layers. The enthalpy and entropy changes of the compounds can be obtained from the differential scanning calorimetric analysis results. From these results, it was found that exothermic and endothermic reactions of lithium inserted into artificial carbon are related to the thermal stability of lithium between artificial carbon graphene layers.

• Elastomers and Composites
• /
• 제33권2호
• /
• pp.75-82
• /
• 1998

The purpose of this experimental study was to investigate the effects of vulcanization condition on the properties of reinforced rubbers. Rubber reinforcing ability of carbon black was more efficient than other fillers, but tensile properties were not affected by vulcanization condition while vulcanization condition affected the physical properties of rubber compounds with silica and silane treated slica. It was found that silica and silane treated silica filled rubber compounds showed good dynamic properties, rebound, heat build-up, 0 and $60^{\circ}C$ tan $\delta$ compared with carbon black filled rubber compounds. Carbon black filled rubber compounds were higher than silica and silane treated silica filled rubber compounds in total crosslinking density by vulcanization condition. By analysis of crosslinking type, polysulfide crosslinking was the highest in the carbon black filled rubber compounds with decreasing the ratio of sulfur to accelerator, monosulfide crosslinking was the highest in the silane treated silica filled compounds with in-creasing the ratio of sulfur to accelerator.

• Macromolecular Research
• /
• 제8권6호
• /
• pp.285-291
• /
• 2000

Influence of silane coupling agent, bis-(3-(triethoxisilyl)-propyl)-tetrassulfide, on cure characteristics and bound rubber content of filled styrene-butadiene rubber (SBR) compounds and on physical properties of the vulcanizates was studied. Carbon black-filled and silica-filled compounds were compared. Content of the bound rubber increased with increased content of the silane coupling agent and this trend was shown more clearly in the silica-filled compounds. Optimum cure time of the carbon black-filled compound increased with increase of the silane content, while that of the silica-filled one decreased. Cure rate of the carbon black-filled compound became slower as the silane content increased while that of the silica-filled one became faster. By increasing the silane content, the minimum torque decreased and the delta torque increased. Physical properties of the silica-filled vulcanizate were found to be improved by adding the silane coupling agent. However, for the carbon black-filled vulcanizates, the tensile strength and tear resistance decreased with increase of the silane content. The differences between the carbon black-filled and silica-filled compounds were explained by difference in the reactivities of the fillers with the silane.

• Carbon letters
• /
• 제10권3호
• /
• pp.190-197
• /
• 2009

Various silanes, amino silane, vinyl silane, sulfur silane (TESPD), and ZS (TESPD/zinc soap complex), are added into chlorinated isobutylene-isoprene copolymer (CIIR)/soft clay/carbon black (CB) and CIIR/hard clay/CB compounds and they are investigated with respect to the vulcanization characteristics, the processability, and the mechanical properties. Comparing hard clay and soft clay filled compounds, hard clay (Suprex) filled system shows a higher die C tear than the soft clay (GK) filled one. The other properties (Mooney, extrusion torque/pressure, torque rise ($M_H-M_L$), modulus at 300%) are close to each other. Among various silanes, the ZS treated hard clay (Suprex) compound shows the highest mechanical property following hard clay(S)/vinyl silane(V) and soft clay(GK)/vinyl silane(V) compounds. The TESPD and the ZS effectively helps a formation of a strong 3-dimensional network structure between silica and CIIR via coupling reaction due to bifunctional nature of TESPD. In addition to that, the ZS added compounds show both a better processability and mechanical properties compared to the S2 ones at low concentration due to improved compatibility between zinc soap and CIIR matrix. Only the ZS added compound shows both improved processabilities (Mooney, Extrusion torque-& pressure) and improved mechanical properties (degree of crosslinking, elongation modulus, tear, and fatigue to failure counts) on both CIIR/hard clay/CB and CIIR/soft clay/CB compounds.