• 대한기계학회논문집B
• /
• 제38권1호
• /
• pp.17-24
• /
• 2014

본 연구에서는 교외지역 대기 에어로졸의 특성을 파악하기 위하여 지구온난화와 밀접한 관련이 있다고 알려진 블랙카본 농도를 측정하였고, 그 결과들을 기상 요소들과 비교하였다. 필터 기반 측정 장치인 MAAP (Multi Angle Absorption Photometer)를 이용하여 측정된 블랙카본 농도와 황사농도, 습도, 온도 및 풍속을 비교하였다. 블랙카본 농도는 4~5월에 높으며 6~9월에 낮은 경향을 보였다. 블랙카본 농도는 PM10(직경 $10{\mu}m$ 이하 입자상 물질) 농도 및 습도와는 비례관계를 보였으며 온도 및 풍속과는 반비례 관계를 보였다. 또한 디젤엔진에서 발생한 블랙카본의 직경 및 광흡수 계수 및 수농도를 측정하여 흡수 단면적을 도출 하였고 이를 통하여 교외 지역 블랙카본의 수준을 평가 할 수 있는 방법을 소개하였다.

• 신재생에너지
• /
• 제2권4호
• /
• pp.70-77
• /
• 2006

The butane decomposition over the catalyst is an attractive method for the hydrogen production. The objective of the work was investigated the catalysis of carbon black in butane decomposition reaction. The Butane decomposition was performed over carbon black catalyst in a range of $500-1100^{\circ}C$. The butane conversion of thermal decomposition and catalytic decomposition were increased with increasing the reaction temperature The butane conversion of the thermal decomposition was higher than the butane conversion of the catalytic decomposition. Hydrogen and methane were mostly observed in the butane decomposition over $1000^{\circ}C$. Especially, the hydrogen yield was steadily increased with raising the reaction temperature, It could be known that the hydrogen yield of the catalytic decomposition was higher than one of the thermal cracking because the hydrogen productivity was improved by the catalyst. The deactivation of the catalyst was not observed in the reactivity test. The surface and crystalline of the fresh and used catalysts were characterized by TEM, BET surface area and XRD analysis, respectively. The fresh carbon black particles had mostly smoothly round-shaped surfaces. In the surface of the carbon black after the reaction, the deposited carbon was formed as the protrusion-shaped carbon and the cone-shaped. The proper peaks of carbon black appeared in XRD analysis.

• 한국화재소방학회논문지
• /
• 제12권4호
• /
• pp.13-19
• /
• 1998

Hartman식 분진폭발 장치를 이용하여 두 총회 카본블랙 High Black 10과 50L의 업도분포별, 농도별 그리고 동일한 입도분포에서 비표면적과 표면 기능기의 양에 따흔 이뜰 시료의 분진폭발 확 률, 분진폭발 압력 통을 조사함i으로서 카본블랙 분친의 위험성을 평가하고자 하였다\ulcorner 이에 카본블 랙의 비표면적을 측정하고 표면에 존재하는 기놓기룹 정량함으로서 휘발분이나 비표면적이 싱-대 적 으로 넓 몫 Hi - Black 50L의 경 우 f-lilongleftarrowBlack 10에 비 해 상대 적 으로 폭발 획 룹과 폭발 압력 이 크게 나타났으며, 최대폭발압력은 돼- Black 50L의 입도분포 230/270 mesh, 시료농도 0.9 mg/em에서 약 6 6.0 kg/em'으로 나타났다.

• 센서학회지
• /
• 제24권2호
• /
• pp.88-92
• /
• 2015

In order to study the semi-conductive characteristics of carbon black-filled ethylene-propylene-diene monomer (EPDM) composite film, which is used for measuring occlusal force, composite samples with volume ratios of carbon black to EPDM ranging from 30% to 70% were prepared. The process of making a composite film consists of two steps, which involve the preparation of a slurry composition and the fabrication of a thin film using solution casting and a lamination process. To prepare the slurry composition, we dispersed carbon black nanoparticles into an organic solvent before mixing with an EPDM solution in toluene. The mechanical and electrical properties of the resulting carbon black-filled EPDM film were then investigated, and the results showed that the electrical resistance of a film decreases with the increase in the carbon black content. Furthermore, improved elastic recovery was observed after cross-linking the EPDM.

• Bulletin of the Korean Chemical Society
• /
• 제19권2호
• /
• pp.170-174
• /
• 1998

Migration properties of antidegradants to the surface in NR vulcanizates containing carbon black of 30, 50, and 70 phr were studied using the migration-generating equipment with a vacuum technique. The migration was carried out at 60, 80, and 100 ℃ for 20 h. BHT, IPPD, HPPD, and wax were used as migrants. IPPD migrates faster than the other migrants. Amounts of BHT, IPPD, and HPPD that migrated at 60 and 80 ℃ decrease as the content of carbon black in the vulcanizate increases. Migrations of antidegradants in the NR vulcanizate containing carbon black of 50 phr are faster than those containing carbon black of 30 and 70 phr at 100 ℃. Although n-C23H48 is heavier than HPPD, it migrates faster than HPPD and even faster than BHT at 100 ℃. Influencing factors of carbon black on the migrations are its porous structure and polar functional groups on the surface.

• 한국염색가공학회지
• /
• 제8권1호
• /
• pp.83-89
• /
• 1996

Carbon black has been used as a particulate soil to prepare artificial soiled fabrics for detergent study but it has two major defects. The one is the difficulty of quantitative analysis of carbon black for evaluate the detergency, the other is that there is no reliable correlation between the removal of carbon black and oily soil which is the major component of natural soil. In this study ferric oxinate was used as a particulate soil since it is in black color and can be soiled on fabric by suspension in water or by solution in chloroform and it is easily analysed quantitatively by extracting it from soiled fabric with chloroform to get correct value of soil removal. The characteristics of soil removal of ferric oxinate were compared with that of carbon black and Sudan black, an oil soluble dye, which had been proved that it's detergency correlated with that of oily soil The soil removal of ferric oxinate and Sudan black estimated from quantitative analysis and from K/S value were in good agreement whereas the result calculated by simple reflectance was consistently low. The soil removal of ferric oxinate was exceeded from that of carbon black without regard to surfactants, Triton and Las, but the effect of washing conditions such as temperature and washing time on soil removal of both soils with different suffactants showed no considerable difference. Though the soil removal of Sudan black was little effected by the conditions, the soil removal in Triton exceeded considerably that of in Las, which is the characteristic of oily soil. Thus the soil removal of Sudan black was in good agreement with ferric oxinate in Triton, a non-ionic surfactant, and with carbon black in Las, an artionic surfactant. We concluded that ferric oxinate is a more realistic model particulate soil for artificial soiled cotton fabric washed with non-ionic surfactant than carbon black.

• 한국기계가공학회지
• /
• 제7권4호
• /
• pp.10-16
• /
• 2008

This study investigated electromagnetic interference(EMI) shielding effectiveness(SE) of the aluminum film, conductive fabric and nano carbon black carbon fiber reinforced composites. We fabricated carbon fiber reinforced composites filled with nano carbon black where they bonded aluminum film and conductive fabric. The measurements of SE were carried out frequency range from 300MHz to 1.5GHz. It is observed that the SE of the bonded aluminum film and conductive fabric composites is the frequency dependent, increase with the increase in filler nano carbon black content. The aluminum film bonded composites showed higher SE compared to that of carbon black and conductive fabric. The aluminum film bonded epoxy composite was shown to exhibit up to 80dB of SE. The result that aluminum film bonded composite can be used for the purpose of EMI shielding as well as for some microwave applications.

• 한국분말재료학회지
• /
• 제18권1호
• /
• pp.41-48
• /
• 2011

As a pore precursor, carbon black with different content of 0 to 60 vol% were added to (Ba,Sr)$TiO_3$ powder. Porous (Ba,Sr)$TiO_3$ ceramics were prepared by pressureless sintering at $1350^{\circ}C$ for 1h under air. Effects of carbon black content on the microstructure and PTCR characteristics of porous (Ba,Sr)$TiO_3$ ceramics were investigated. The porosity of porous (Ba,Sr)$TiO_3$ ceramics increased from 6.97% to 18.22% and the grain size slightly decreased from $7.51\;{\mu}m$ to $5.96\;{\mu}m$ with increasing carbon black contents. PTCR jump of the (Ba,Sr)$TiO_3$ ceramics prepared by adding carbon black was more than $10^5$, and slightly increased with increasing carbon black. The PTCR jump in the (Ba,Sr)$TiO_3$ ceramics prepared by adding 40 vol% carbon black showed an excellent value of $9.68{\times}10^5$, which was above two times higher than that in (Ba,Sr)$TiO_3$ ceramics. These results correspond with Heywang model for the explanation of PTCR effect in (Ba,Sr)$TiO_3$ ceramics. It was considered that carbon black is an effective additive for preparing porous $BaTiO_3$ based ceramics. It is believed that newly prepared (Ba,Sr)$TiO_3$ cermics can be used for PTC thermistor.

• 한국재료학회지
• /
• 제30권10호
• /
• pp.522-532
• /
• 2020

Conductive polymer composites with high electrical and mechanical properties are in demand for bipolar plates of phosphoric acid fuel cells (PAFC). In this study, composites based on natural graphite/fluorinated ethylene propylene (FEP) and different ratios of carbon black are mixed and hot formed into bars. The overall content of natural graphite is replaced by carbon black (0.2 wt% to 3.0 wt%). It is found that the addition of carbon black reduces electrical resistivity and density. The density of composite materials added with carbon black 3.0 wt% is 2.168 g/㎤, which is 0.017 g/㎤ less than that of non-additive composites. In-plane electrical resistivity is 7.68 μΩm and through-plane electrical resistivity is 27.66 μΩm. Compared with non-additive composites, in-plane electrical resistivity decreases by 95.7 % and through-plane decreases by 95.9 %. Also, the bending strength is about 30 % improved when carbon black is added at 2.0 wt% compared to non-additive cases. The decrease of electrical resistivity of composites is estimated to stem from the carbon black, which is a conductive material located between melted FEP and acts a path for electrons; the increasing mechanical properties are estimated to result from carbon black filling up pores in the composites.

• 공업화학
• /
• 제7권3호
• /
• pp.565-572
• /
• 1996

천연고무(NR), 부타디엔 고무(BR), 오일 투입량을 변량한 스티렌-부타디엔 고무(SBR)를 기본으로 하는 고무배합을 통하여 카본블랙의 최적 투입량에 대하여 연구하였다. 카본블랙의 최적 투입량은 Lee 이론을 기초하여 L 인자 값과 카본블랙의 부피비와의 상관 관계를 통하여 결정하였다. 그리고 얻어진 최적 투입량 값을 고무 물성 시험 결과를 통하여 재검증 하였다. 고무 종류별 카본블랙의 최적 투입량값은 각각 NR 60 phr, BR 57 phr, SBR-A 65 phr, SBR-B 70 phr, SBR-C 76 phr로 얻어졌다. 또한 오일의 함량을 20 phr씩 증가시킬때 마다 약 5phr 정도의 최적 투입량이 증가함을 관찰할 수 있었다. L 인자값을 통하여 얻어진 카본블랙의 최적 투입량은 인장강도와 가장 밀접한 관계가 있었으며 최대 인장강도 값을 갖는 카본블랙의 투입량 근처에서 형성되었다.