• Journal of Korean Society of Transportation
• /
• v.33 no.5
• /
• pp.488-496
• /
• 2015

The main reason to install pedestrian pushbuttons is improving traffic operations. The current guideline for the installation of signal systems with pedestrian pushbuttons is car-oriented. It is difficult to clearly understand the guideline because there isn't an in-depth study to compare the pros and cons of the pedestrian- and vehicle-oriented methods in terms of waiting time. Thus, this study aims to estimate the waiting times of pedestrians and vehicles. The two delay times are compared considering the hypothetical circumstances such as geometry, pedestrian crossing time, pedestrian/vehicle counts and arrival distribution. The results show that when the pedestrian traffic volume exceeds 97 ped/h in the case of a two-lane road (one lane in each direction) the pushbutton system is effective and beneficial to pedestrians. It means that the total waiting time of pedestrians is less than the one of vehicles. Additional four scenarios are designed and tested by varying the number of lanes and design speeds. In conclusion, the pushbutton signal is more beneficial for pedestrians when the number of pedestrians is less than or equal to 85, 70, and 70 ped/h for the three-lane scenario, the four-lane with the design speed of 80km/h scenario, and the four-lane with the design speed of 100km/h, respectively.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.25 no.1
• /
• pp.51-59
• /
• 2017

In 2014, there were approximately 4,762 fatalities on Korean roads. The fatality rate has decreased by 6.5 %, as compared to that of the previous year. The pedestrian-vehicle fatalities (1,795) have also decreased by 6 % over the previous year. However, the percentage of the pedestrian fatalities has increased from 37.9 % to 38.7 % during the same period. This is why further research is required, even though the KNCAP pedestrian safety assessment and KMVSS for pedestrian protection currently exist. This paper studied the Upper Legform to Bonnet Leading Edge Test at the front of the vehicles, which has not been introduced yet in Korea. The test method and procedure of the new BLE test in the Euro NCAP test protocol have been reviewed, and the physical tests on SUV and sedan with different bonnet leading edge heights have also been conducted and reviewed. In addition, the test results and characteristics have been analyzed via comparison with the former BLE test and each vehicle type.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.5
• /
• pp.968-972
• /
• 2007

The importance of bumper system lies not only in the styling of vehicles, but also in the protection of vehicles and pedestrians from reasonable impact. In this study, we proceed to search a method for efficient bumper system without using the impact test and the computer simulation to analyze the bumper system. In the process of the research, we proposed the each method that is used to search the shape that satisfy each regulations in first, because bumper's dimensions to satisfy 'vehicle protection' regulations and form's dimensions to satisfy ‘pedestrian protection' regulations are difficult to exist together. After that we proposed the calculate method and design algorithm that is used to search a reasonable point satisfying the two regulations together.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.39 no.4
• /
• pp.505-512
• /
• 2019

This study is a basic study to prepare safety measures for the tram that is being introduced into Korea by reviewing accident analysis and accident compensation system of the tram. Analysis of accident characteristics of the tram was analyzed based on overseas data. Five years after the inauguration of the tram, accidents were halved and stabilized. Deaths accounted for 0.5 % of all casualties, most accidents were minor. Accidents with other mean transportation were high 84.1 %, among them accidents with passenger cars was found to be highest. The frequent points of accidents were analyzed as intersections and tram stop, and measures for pedestrian accidents were found to be important. Those are proposed safety measures through analyzing tram accident characteristics: Monitoring accidents which occur within five years of its inauguration, developing accident database input system, installation of fences for preventing people from jaywalking, operating traffic signal for preventing people from jaywalking through connection of pedestrian signals and tram signals, clamping down on illegal U-turn cars and jaywalking pedestrian, Also, those are proposed accident treatment measures based on general driver receptively and overseas data: property damage liability coverage (PI) of car insurance, comparative negligence when the accident occurs between car and tram.

• Journal of the Korean Society of Safety
• /
• v.25 no.3
• /
• pp.131-136
• /
• 2010

This study deals with the accident models of arterial link sections by vehicle type. The objectives are to analyze the characteristics of accidents, and to develop the models by type. In pursuing the above, this study uses the data of 414 accidents occurred on 24 major arterial links in 2007. The main results analyzed are as follows. First, the number of accidents is analyzed to account for about 47% in passenger car, 15% in SUV and 10% in trucks. Second, 3 Poisson regression models which are all statistically significant are developed using passenger car, SUV and truck as dependant variables. Finally, AADT and the number of traffic islands as common variables, and the number of pedestrian crossings, lanes, connecting roads, intersections(4-Leg), rate of medians and the number of bus stops as specific variables of the models are selected.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.12
• /
• pp.1934-1937
• /
• 2022

The meaning of crosswalks and traffic lights in modern society has changed a lot as the enforcement of traffic signal violations has been strengthened. In this paper, we present a new next-generation traffic light method using radar and Can-bus communication methods suitable for the new traffic signal enforcement system. This method is a system that prevents accidents by transmitting information on the entry of a person and a car to a traffic light in a place where a person and a car passing through a mutually invisible traffic light cannot be seen. Since this system has only been developed for a month, it may be somewhat lacking in experimentation. However, in just one month, there have been no incidents except for a few people where the system has been installed.

• International Journal of Highway Engineering
• /
• v.20 no.1
• /
• pp.127-135
• /
• 2018

PURPOSES : Traffic cameras have been installed to reduce traffic accidents. The effectiveness of traffic cameras has been proved by dozens of studies, but recently questions over its effectiveness have been raised by a series of studies. In this study, the effectiveness of traffic cameras was analyzed with a focus on different road environments. METHODS : The effectiveness of the traffic cameras was analyzed by extracting the occurence frequency before and after camera installation. The effect of reduction was analyzed comprehensively considering the installation position, monitoring direction, and surrounding environment of traffic cameras. RESULTS : The result of this study is as follows. First, the installation of cameras in an area with relatively low accidental traffic was more effective. Secondly, the effect of camera installation on car-to-pedestrian collisions was better than that of car-to-car collisions. Thirdly, accidents tended to occur more frequently when cameras were installed in front of the accident-prone owing to the negative spill-over effect. CONCLUSIONS : The result can be used to guide placement of traffic cameras. Moreover, the installation of cameras with consideration of the road environment is expected to contribute to a reduction in traffic fatalities.

• Journal of Platform Technology
• /
• v.6 no.3
• /
• pp.10-16
• /
• 2018

Bicycle shares road with various traffic elements like car, pedestrian and, the number of bicycle user is increasing in recent. Therefore, bicycle accident continuously increases. Especially in complex traffic environment, bicycle accident which collides with moving object such as pedestrian occupies many parts of bicycle accident in the reason that the cyclist does not recognize moving object. In this paper, to reduce or avoid the bicycle accident, we propose the architecture of bicycle collision avoidance system in which that cyclist can get the information about moving object by connecting bicycle to network of vehicles and does some action for avoiding collision. In our architecture, when traffic element such as car recognizes moving object, it decides the moving direction of object, and transfers information about moving direction via vehicles network. Bicycle collision avoidance system from our proposed architecture receives this information, and alerts to cyclist when the moving object influences the safety of bicycle.

• Journal of Trauma and Injury
• /
• v.26 no.3
• /
• pp.175-182
• /
• 2013

Purpose: Crushing injuries by car tires result from a combination of friction, shearing, and compression forces and the severity of injury is influenced by the acceleration. Because car-tire injuries of the lower leg in children are common these days but they have received little attention; thus, our purpose was to look closely into this problem. Methods: A retrospective analysis was conducted of data from children under 15 years old age who visited an emergency department because of a car-tire-related crushing injury to the lower leg in pedestrian traffic accident from January 2008 to September 2012. The patient's age, sex, site of injury, degree of injury, associated injuries, type of surgery, and complications were reviewed. Results: There were 39 children, the mean age was 8.0 years, and 71.8% were boys. The dorsal part of the leg was involved most frequently. According to the severity classification, 15 children were grade I, 6 were grade II, and 18 were grade III. Among 24 patients, 13 were treated with skin graft and 3 were treated using a sural flap. Twelve patients developed complications, such as hypertrophic scarring, contractures, and deformities with significant bone loss. Conclusion: Various degrees of skin or soft tissue defects were caused in children by car tires. In this study, patients were often also had tendon or bone damage. Proper and timely initial treatments are needed to reduce the incidence of infection, the number of operative procedures, and the hospital stay.

• Journal of Auto-vehicle Safety Association
• /
• v.4 no.2
• /
• pp.32-36
• /
• 2012

The Automatic unmanned target object carrying system (AUTOCS) is developed for testing road vehicle radar and vision sensor. It is important for the target to reflect the realistic target characteristics when developing ASV or ADAS products. The AUTOCS is developed to move the pedestrian or motorcycle target for desired speed and position. The AUTOCS is designed that only payload target which is a manikin or a motorcycle is detected by the sensor not the AUTOCS itself. In order for the AUTOCS to have low exposure to radar, the AUTOCS is stealthy shaped to have low RCS(Radar Cross Section). For deceiving vision sensor, the AUTOCS has a specially designed pattern on outside skin which resembles the asphalt pattern. The AUTOCS has three driving modes which are remote control, path following and replay. The AUTOCS V.1 is tested to verify the radar detect characteristics, and the AUTOCS successfully demonstrated that it is not detected by a car radar. The result is presented in this paper.