• 한국생활과학회지
• /
• 제18권2호
• /
• pp.407-418
• /
• 2009

In our modern society along with high speed economic growth and improvement of living conditions and through concentration of people in cities cars became essential necessities for people living in modern society. Due to social and economic conditions and for the need of recycling of materials and as a countermeasure for waste of materials importance of car service is stressed. In this connection need for improvement of working clothes which are suitable for safety and working efficiency in a difficult working environment is essential. However most of working clothes now being sold in the market are produced without consideration of ergonomic aspects of wearers of working clothes. For this reason there is need for basic research on development of working clothes which improve safety and comfort for working of car service workers. Accordingly in this study this author carried out research on fitness, level of satisfaction and dissatisfaction, suitability for movement and level of demand for improvement in working clothes with focus on workers at car service firms and direction for its improvement was explored. This study is intended to provide basic data for development of functional pattern of working clothes for car service workers in future.

• 반도체디스플레이기술학회지
• /
• 제15권4호
• /
• pp.61-66
• /
• 2016

This paper presents the implementation for a network structure of railway cars using a point to point communication. Most of network's representative specifications for a train are the FIP (Field Bus), MVB (Multifunction Vehicle Bus), CAN and WTB (Wire Train Bus) which is used by ALSOM, SIEMENS and BOMBADIER as major in this field. These networks in a physical layer use a multi-drop method, connected from $1^{st}$ car to $n^{th}$ car of a train through a cable without any extra services such as an electric part, amplifier. However waveforms which is passed through a long cable in the multi-drop are distorted by a capacitance or resistance of the cable or environments. Also since using a cable connected directly from $1^{st}$ car to $n^{th}$ car, if over two trains make double head, it isn't easy to distinguish ID for each railway cars. So by using the point to point network per each car, it is able to reduce a distortion. Also since reducing distortion, this communication speed can be been higher and transmit and receive any packets more stably. Using proposed token in a packet, this can make ID per each railway car automatically. Finally experimental results show the good performance and effectiveness of the proposed method.

• 자동차안전학회지
• /
• 제15권4호
• /
• pp.39-47
• /
• 2023

Research on the safety of autonomous vehicle is being conducted in various countries, including the European Union, and computer simulation techniques so called 'Virtual Tool Chain' are mainly used. As part of the crash safety study of autonomous vehicle, 25 car to car collision scenarios were provided as a result of a real accident-based accident reproduction analysis study conducted by a domestic research institution, and a vehicle crash analysis was performed using the FE car to car model of the Honda Accord. In order to analyze the results of the car to car simulation and to construct a database, major crash parameters were selected as impact speed, angle, location, and overlap, and a method of defining them in an indexed form was presented. In order to compare the crash severity of each scenario, a value obtained by integrating the resultant acceleration measured by the ACU of the vehicle was applied. The equivalent collision test mode was derived by comparing the crash severity of the regulation test mode, 30 deg rigid barrier mode, in the same way.

• Journal of Mechanical Science and Technology
• /
• 제14권8호
• /
• pp.867-878
• /
• 2000

In order to study unsteady aerodynamic loads on high speed trains passing by each other 350km/h, three-dimensional flow fields around trains during the crossing event are numerically simulated using three-dimensional Euler equations. Roe's FDS with MUSCL interpolation is employed to simulate wave phenomena. An efficient moving grid system based on domain decomposition techniques is developed to analyze the unsteady flow field induced by the restricted motion of a train on a rail. Numerical simulations of the trains passing by on the double-track are carried out to study the effect of the train nose-shape, length and the existence of a tunnel on the crossing event. Unsteady aerodynamic loads-a side force and a drag force-acting on the train during the crossing are numerically predicted and analyzed. The side force mainly depends on the nose-shape, and the drag force depends on tunnel existence. Also. a push-pull (i.e.impluse force) force successively acts on each car and acts in different directions between the neighborhood cars. The maximum change of the impulsive force reaches about 3 tons. These aerodynamic force data are absolutely necessary to evaluate the stability of high speed multi-car trains. The results also indicate the effectiveness of the present numerical method for simulating the unsteady flow fields induced by bodies in relative motion.

• 한국정밀공학회지
• /
• 제31권9호
• /
• pp.765-771
• /
• 2014

During the acceptance test of KTX, unexpectedly great lateral vibration in 14th~16th train at 150km/h~200km/h was appeared on a straight line in the winter season. Generally, stiffness of secondary suspension in KTX vehicle is one of the most sensitive components on air temperature. So, we examined that the secondary suspension to be mounted heating system was able to reduce the lateral vibration in the tail car of KTX. Also, we verified that lateral vibration from test results on KTX train with wheel conicity 1/20 disappeared. In this paper, we analysis effective reduction methods and the cause of the lateral vibration using model of KTX train and compare with the test results. The analysis results agree well with test ones. From mode analysis result, lateral vibration is occurred at natural frequency range 0.5~0.6Hz with a negative damping value and its natural frequency disappear gradually according to increasing of wheel concinicy.

• 한국자동차공학회논문집
• /
• 제11권2호
• /
• pp.148-156
• /
• 2003

Many car manufacturers have frequently adopted an aggressive inflator and a lower threshold speed for airbag deployment in order to meet an injury requirement for unbolted occupant at high speed crash test. Consequently, today's occupant safety restraint system has a weakness due to an airbag induced injury at low speed crash event. This paper proposes a new crash algorithm to improve the weakness by suppressing airbag deployment at low speed crash event in case of belted condition. The proposed algorithm consists of two major blocks-crash severity algorithm and deployment logic block. The first block decides crash severity with two levels by means of velocity and crash energy calculation from acceleration signal. The second block implemented by simple AND/OR logic combines the crash severity level and seat belt status information to generate firing commands for airbag and belt pretensioner. Furthermore, it can be extended to adopt additional sensor information from passenger presence detection sensor and safing sensor. A simulation using real crash data for a 1,800cc passenger vehicle has been conducted to verify the performance of proposed algorithm.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2003년도 춘계학술대회 논문집
• /
• pp.718-723
• /
• 2003

The acceptance test of KTX has been performed in Korea. During the test lateral vibration of carbody over the accepted value called sway was found. Many activities have been taken to find the cause of the vibration and the counter-measure. KTX has 20 car trainset formation whose trailer cars are linked by articulate bogies. So this study is performed to see the effects of long trainset formation on vehicle dynamics and the train stability by 16 car vehicle model. Firstly the reliable vehicle model which shows well the tendencies appeared in the tests on the high speed test line is required to find the cause of lateral vibration and the countermeasure. Vehicle model was made for the analysis with VAMPIRE. The analysis results show that secondary air spring lateral stiffness is the most significant parameter to cause carbody lateral vibration. Mode analysis results show that the least damped mode shape is similar to the vibration pattern shown in the tests that the amplitude of the motion increases along the train set and decreases in the tail part. The lateral vibration was appeared at the speed range between 100km/h and 200km/h and disappeared at the low speed and the high speed.

• 한국철도학회논문집
• /
• 제6권2호
• /
• pp.122-128
• /
• 2003

The acceptance test of KTX has been performed in Korea. During the test, lateral vibration of carbody over the accepted value called sway was found. Many activities have been taken to find the cause of the vibration and the counter-measure. KTX has 20 car trainset formation whose trailer cars are linked by articulate bogies. So this study is performed to see the effects of long trainset formation on vehicle dynamics and the train stability by 16 car vehicle model. Firstly the reliable vehicle model which shows well the tendencies appeared in the tests on the high speed test line is required to find the cause of lateral vibration and the countermeasure. Vehicle model was made for the analysis with VAMPIRE. The analysis results show that secondary air spring lateral stiffness is the most significant parameter to cause carbody lateral vibration. Mode analysis results show that the least damped mode shape is similar to the vibration pattern shown in the tests that the amplitude of the motion increases along the train set and decreases in the tail part. The lateral vibration was "appeared at the speed range between 100km/h and 200km/h and disappeared at the low speed and the high speed.

• 대한토목학회논문집
• /
• 제30권6D호
• /
• pp.587-597
• /
• 2010

교통사고가 발생하면 사고 당사자들은 민 형사적인 문제에서 자유롭지 못하기 때문에, 교통사고 조사자는 사고 상황을 정확하게 재현 또는 분석을 하여야 한다. 또한, 이러한 교통사고 발생과 관련한 요인에 대한 분석을 통해 얻어진 자료를 활용하여 교통사고 다발지역의 개선 및 보완작업을 시행하게 된다. 현재까지 알려진 바로는 수많은 교통사고, 교통시설물, 도로설계 등과 관련하여 가장 많은 영향을 미치는 요인은 차량의 속도와 가속능력, 제동능력 등이다. 이는 자동차의 성능과 노면의 마찰계수가 가장 밀접한 영향을 미치는 부분이다. 특히, 사고 순간의 속도의 추정은 교통사고처리특례법의 11개 주요항목인 과속과 관련하여 매우 중요한 사항이기에 정확성이 요구되는 부분이다. 하지만, 국내에서는 아직 이러한 부분에 대한 심도 있는 연구가 많이 진행되지 못하는 것이 현실이다. 이러한 현실을 반영하여 본 연구에서는 차량의 급제동에서 제동흔적이 발생되기 시작할 때까지의 시간인 제동경과시간을 정밀가속도계(Vericom VC2000PC)로 측정하여 제동경과시간과 노면의 마찰계수를 정확히 추정하였다. 실험결과를 분석하여, 여러 가지 특수 아스팔트 포장 및 미끄럼방지포장 종류에 따른 제동경과시간과 마찰계수를 계산하여 연구의 목적에 맞도록 기초자료를 제공하고자 하였다.

• 대한토목학회논문집
• /
• 제33권5호
• /
• pp.1999-2007
• /
• 2013

2차로 양방향 도로(이하 2차로 도로)의 주요한 특징은 화물차량 등의 저속차량으로 인하여 발생하는 차량군과 차량추월 행태이다. 차량추종과 차량추월모형이 결합된 2차로 도로 교통류 모형을 개발하기 위해서는 2차로 도로에 적합한 차량추종모형의 개발이 필수적이다. 2차로 도로에서 고속차량은 저속차량의 후미에서 차량추종을 수행함과 더불어 추월을 수행하게 되며, 이 과정에서 짧은 차간거리가 발생하게 된다. 또한 저속차량을 추종하는 차량은 대항교통류의 차두시간분포 내에서 적정 공간을 이용하여 차량추월을 결정하게 된다. 따라서 2차로 차량추종모형은 짧은 차간거리에서 차량주행과 더불어 차두시간분포를 설명해야 한다. 추가적으로 국내의 2차로 도로규모를 고려하면 대규모 도로망을 모의실험할 수 있는 모형이 필요한 실정이다. 국내의 경우, 2차로 차량추종모형에 대한 연구는 거의 보고되고 있지 않다. 본 연구에서는 대규모 가로망에 적용이 가능하면서 2차로 도로의 차량추종행태를 보다 현실적으로 구현할 수 있는 모형을 개발하였다. 개발된 모형의 실험적 평가 결과, 혼잡 교통류의 특성 중 하나인 가다서다(stop-and-go) 현상과 차두시간분포를 효과적으로 설명하는 것으로 나타났다. 따라서 본 연구에서 제시된 차량추종모형이 차량추월모형과 결합된 경우, 보다 현실적으로 2차로 도로 교통류를 설명할 수 있을 것으로 판단된다.