• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.10a
• /
• pp.443-448
• /
• 2014

Recently, car-ferry passenger ships of navigating the coast area in the inside of our country are on an increasing trend of main engine power and the height of upper structure, which is increased to ship's speed and loading of large vehicles. The most ship with high-speed main engine is happened to excessive vibration by propeller induced excitation force on account of connecting the vibration of hull's girder and the upper structure by decreasing the shear stiffness and natural frequency for increasing the height of passenger deck. In this paper, By exchanging the propeller of alteration the number of blades, it could be keep to ship's speed and it's decreased the vibration of hull part that is located passenger deck on the upper deck, which is identified by countermeasure of protection against vibration to procure the safety ship's navigation through measuring the vibration of hull structure.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.1
• /
• pp.126-132
• /
• 2018

This paper discusses about results of advanced buckling strength design for several kinds of perforated plated in the twin-hull car-ferry. For medium / small sized high speed vessels with a length of more than 50 meters and a length / width ratio of more than 12, such as car-ferries, it is highly possible that the buckling strength becomes weak due to the relatively thin thickness and the use of low strength capacity such as mild steel. Especially, it becomes big problem about weak buckling rigidity around the opening to access purpose in the perforated. As regarding safety design point of view for perforated plate, it is necessary to clarify buckling strength and ultimate strength by the distribution of in-plane load distribution around the opening. In this study, nonlinear series analysis using ANSYS was performed to clarify the influence of parameters such as aspect ratio, opening ratio and opening shape affecting the buckling and ultimate strength characteristics of the perforated plate under axial compression and we are derived the optimum design as buckling strength point of view. Based on these results, the governing factor determining the buckling strength of the perforated plate was the opening ratio, and the aspect ratio and the shape of the hole were not influenced.

• Journal of Korea Port Economic Association
• /
• v.34 no.2
• /
• pp.17-30
• /
• 2018

The regional industry promotion system, which seeks to link the characteristics and resources of the region to its core strategic industry, is spreading the industrial resources in the form of an organic network. The Seosan-Daesan Port is the only port in the Chungcheong provinces that is equipped with international passenger dock and terminal, and it will soon have a ferry service operating to the Longyan port in Rongcheng, China in 2018. The study focuses on effects of the first international ferry operation in the provinces that are being realized with the aim of developing the regional industry. The study also analyzes the ripple effects on the tourism and port industries in the provinces by tapping into the 2013 regional inter-industry table. The analysis shows that the scheduled ferry operation will generate 47,815 million won in production and 23,423 million won in added value for the region's tourism industry. It will also generate total revenue of 12,567 million won for the port industry driven by the locally handled freight containers and the added value. Currently, the Korea-China ferry operation in other regions exhibits greater dependence on the cargo than the passengers. Thus, for the international ferry operation to and from Seosan, generating maximum employment in tourism from the passengers of the international ferry operation will require strategic marketing to attract tourists. At the same time, a steady supply of cargo needs to be sustained by maintaining a balance between import and export cargoes. Furthermore, greater efforts should be made to create more sea routes than other regions or to increase voyages for the purpose of generating more added value.

• Journal of Navigation and Port Research
• /
• v.44 no.2
• /
• pp.88-97
• /
• 2020

In the past 20 years, passenger and cargo transportation performance at the international passenger ports in Korea have increased by 8.6% on the compound annual growth rate, respectively. The Korean government had expected to continue expanding the market of car ferries and the government included plans for the development of additional routes and lanes with neighboring countries such as China, J apan, and Russia as a part of the Plan of the Korean Ministry of Oceans and Fisheries in 2019. However, compared to the development of routes, the management and operation of passenger terminals are inefficient. The purpose of this paper was to introduce the overall improvement of the passenger terminal operating system that reflects the recent changes in the supply and demand of international passenger vessels and the needs of the government and private sector passengers. To this end, a basic survey was conducted on the status of operations and facilities at the Busan International P assenger Terminal and a questionnaire survey was administered on the subject of use. The results of the survey were analyzed using the IPA model. As a result of the analysis, three items in the operation sector, three items in the facility sector, and four items in the system sector of the Busan International Passenger Terminal were identified as in need of improvement. Based on the results, the need for investment to improve the international passenger terminal operating system is suggested.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.6
• /
• pp.731-738
• /
• 2017

Twin-hulls frequently incur structural damage at connecting members between the hull and deck induced by pitching motions during voyages. so, reasonable reinforcement is necessary around vulnerable spots such as corner knuckle, the chine bottom and inner hull. Since guidelines for structural design are not clear, engineers often respond by reinforcing plate thickness, changing stiffener sizes and reducing frame spacing, etc. These members constitute about 85 % of the longitudinal dimensions of the ship, so it is necessary to locally reinforce certain points to minimize weight stress, and also solve construction cost problems while securing the freeboard margin. Therefore, we developed a new program by analyzing the structural design procedures for the twin car-ferries based on Korean Register of Shipping (KR) High Speed Craft Rules, identifying items that need to be added. In order to ensure the reliability of buckling estimations for procedures and design programs, we conducted a comparative study with other standards and confirmed that differences were minimal.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.26 no.6
• /
• pp.587-593
• /
• 2020

The securing safety of ferry ships on the domestic coast is evaluated by comparing the external force applied and the securing device based on the cargo weight and hull acceleration that can exist at the loaded position. The hull acceleration based on the domestic standard, which is the basis for securing safety evaluation, is applied without reflecting the characteristics of the ship and the sailing conditions. In this study, a total of 12 acceleration measurements were performed at four points of the hull of a ship with a DWT 6,800 ton class 15.5 knots passing through Busan-Jeju to analyze the hull acceleration of the domestic coastal ferry ship. Data were collected for the buoy. For a theoretical comparative analysis of the limited measurement results, the response amplitude operator (RAO) was analyzed through frequency-response analysis by numerical simulation, and acceleration analysis for the four points was performed using the RAO results. Based on the acceleration comparison, differences in the degree of each position were observed, but in the case of the Y-axis acceleration, the analysis was 1.81 m/s², and the measurement was 1.47 m/s². The analyzed simulation result was as high as 0.34 m/s². Moreover, analysis was performed at 22 % level, and measurement at 18 % level.

• Journal of Korea Port Economic Association
• /
• v.17 no.2
• /
• pp.139-166
• /
• 2001

Globalization and regionalization are major trends in the international economic system. The severe competition among countries has signalled the need for a new international trade system as prescribed by the WTO, which regulates international trade practices. Additionally, expanding the activities and role of the Pan-Yellow Sea area in the world has a very important function in terms of regional cooperation and logistics environment. In this paper, the trading conditions and shipping transport problems of the Pan-Yellow Sea area (North-East Asia) were investigated. Shipping transport conditions in the Pan-Yellow Sea area, particularly Korea-China routes, were surveyed as well. A new Incheon-China container liner route was suggested as a partial remedy to some of the shipping transport problems of the Pan-Yellow Sea Area (North-East Asia). The Incheon-China Container Liner route is more efficient than Pusan and Pyungtaek Ports or the car ferry route to China in terms of transport time and expense. The transport burden indicator which includes the time and expense of transport, can be a useful tool in comparing these routes. Accordign to the transport burden indicator, the Incheon-China Container Liner route is more efficient than the Pusan, Pyungtaek, or car ferry routes. To establish a successful liner route between the ports of Inchon and China, there is a need to prepare three measures that contain short-term medium-term and long-term strategies. Furthermore, these measures should be prepared and adopted in phases, in accordance with considerations of future conditions for shipping and logistics in the Pan-Yellow Sea area.

• Journal of the Society of Naval Architects of Korea
• /
• v.34 no.3
• /
• pp.38-52
• /
• 1997

Aluminum-faced honeycomb-cored sandwich panels as hull plating can provide structural weight savings when compared with the conventional aluminum single panels. The aim of the present paper is to confirm the feasibility of the sandwich panels for the hull material of fast ferries through designing an 80m class proto-type fast passenger/car ferry. For the case study, the structural design for the same principal particulars using the aluminum single panels is also performed, and the design results for the two types will be compared to confirm the weight savings between the two construction methods. The economics of a ship, being comprised of the shipbuilding cost and ship operaing cost, will require a cost analysis including a quantitative comparison between the two construction methods and the results of the cost analysis will be presented. Finally, the reasons why aluminum sandwich panels have not presently been used as the hull material for large size fast vessels will be discussed.

• Journal of Korea Port Economic Association
• /
• v.27 no.2
• /
• pp.195-215
• /
• 2011

The purpose of this article is to provide data to be utilized for marketing to attract future container cargo to the Korea-China Car Ferry Service and to estimate container traffic for the development of the International Passenger Terminal to be newly built in the Incheon Southern Port. An analysis of container traffic through the Passenger Terminal of Incheon Port showed that the container throughput of Incheon Port comprised 20% of traffic. The export cargo traffic in the International Passenger Terminal, 71.4%, or 111,698 TEU of 156,284 TEU in total, was brought from metropolitan areas. To increase the container traffic of the car ferry service currently concentrated on the metropolitan areas, more endeavor is required to strengthen marketing competence to attract container traffic to other regions apart from the metropolitan areas as well as provide general services.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2013.06a
• /
• pp.209-213
• /
• 2013

The expense Our country's land logistics system is becoming backlog day by day. The greenhouse gas which it discharges specially from the vehicle causes a ecocide and traffic expense to make. The traffic energy curtailment which the government enforces during that time and environment-friendly green goods policy lost the effect. Therefore, This research propose the car-ferri network which is the most effective logistics system substitutes the land logistics system. This research will contribute improving the north and south logistics network of Pusan and Seoul region and will be able to reduce a various goods expense.