• Journal of Korea Water Resources Association
• /
• v.39 no.2 s.163
• /
• pp.139-150
• /
• 2006

In recent, increasing of the impervious area gives rise to short concentration time and high peak discharge comparing with natural watershed and it is a cause of urban flood damage. Therefore, we have performed for structural and non-structural plans to reduce the damage from inundation. The Gulpo-cheon basin had been frequently inundated and damaged due to the water level of Han river. So, the Gulpo-cheon floodway was constructed with 20 meters width for flood control in the basin but it was not enough for our expectation and now we have a plan to expand the floodway to 80 meters. We use a XP-SWMM model developed based on EPA-SWMM version for analyzing the capacity of flood conveyance by the expansion of Gulpo-cheon floodway with the same 100 years return period design storm and the same tidal conditions of the Yellow sea. The flood conveyance after the expansion of floodway becomes three times comparing it with before the expansion. Also we simulate the flood discharge at the diversion point of Gulpo-cheon for the expanded condition of floodway and know that the discharge of about 300 m3/sec is flowing backward to the expanded floodway. Therefore we may need some kinds of hydraulic structures to prevent the back water.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.40 no.11
• /
• pp.705-715
• /
• 2016

In this study, the cycle performance of an air conditioner with multi-indoor units is analyzed and simulated. The cycle performance could be predicted through the integration of mathematical formulation for these devices. The condenser pressure is obtained by an iteration process to match the mass flow rates of the compressor and the expansion valve and the evaporator pressure is determined by an iteration process, in which the suction super heat is tracing the targeted super heat. The required software was developed by system programming. the software algorithm is extended to predict the cycle performance of an air conditioner system with multi-indoor units, and then the numerical results are compared with experimental results. This mathematical model is validated from the result of experiments conducted on 8.3kW air conditioner. The errors in capacity, electronic power, and COP are found to be within 10% in general.

• Geomechanics and Engineering
• /
• v.32 no.4
• /
• pp.375-385
• /
• 2023

There are many joint fissures distributed in the engineering rock mass. In the process of geological history, the underground rock mass undergoes strong geological processes, and undergoes complex geological processes such as fracture breeding, expansion, recementation, and re-expansion. In this paper, the damage-stick-slip process (DSSP), an analysis model used for rock mass failure slip, was established to examine the master control and time-dependent mechanical properties of the new and primary fractures of a multi-fractured rock mass under the action of stress loading. The experimental system for the recemented multi-fractured rock mass was developed to validate the above theory. First, a rock mass failure test was conducted. Then, the failure stress state was kept constant, and the fractured rock mass was grouted and cemented. A secondary loading was applied until the grouted mass reached the intended strength to investigate the bearing capacity of the recemented multi-fractured rock mass, and an acoustic emission (AE) system was used to monitor AE events and the update of damage energy. The results show that the initial fracture angle and direction had a significant effect on the re-failure process of the cement rock mass; Compared with the monitoring results of the acoustic emission (AE) measurements, the master control surface, key blocks and other control factors in the multi-fractured rock mass were obtained; The triangular shaped block in rock mass plays an important role in the stress and displacement change of multi-fracture rock mass and the long fissure and the fractures with close fracture tip are easier to activate, and the position where the longer fractures intersect with the smaller fractures is easier to generate new fractures. The results are of great significance to a multi-block structure, which affects the safety of underground coal mining.

• Journal of the Korean Academy of Child and Adolescent Psychiatry
• /
• v.27 no.2
• /
• pp.100-108
• /
• 2016

Objectives: The purpose of this study was to examine the effect of the Students' Mental Health School-Community Cooperative Model on the school mental health awareness of the participants (school administrators, teachers, students). Methods: Data were collected from 140 schools that participated in the project. The questionnaires were composed of items about the school mental health policy, climate and capacity. The data was analyzed through paired t-tests between pre and post, and a comparison was made between the 1st and 2nd phase regions. Results: The total scores of the teacher and student groups increased significantly, whereas those of the school administrators did not. The awareness of the teachers showed more changes in the 1st phase regions, while those of the students changed more at the 2nd phase. Conclusion: Based on the results, the expansion of the Students' Mental Health School-Community Cooperative Model was proposed.

• Hwankyungkyoyuk
• /
• v.19 no.1 s.29
• /
• pp.30-42
• /
• 2006

The Ministry of Environment supports environmental education mainly in two ways ; one is by supporting schools engaged in environment conservation model school and the other is by extending grants for experiential environmental education programs. This research aims to evaluate the current status of grant for experiential environmental education programs while proposing possible improvement for constructive and continuing development of the support measures. Grant for experiential environmental education programs is divided into two areas of grant for schools and grant for community-based civil organizations. The diagnosis and evaluation were conducted in terms of 7 areas, such as time, facilities, programs, manpower (professional expertise), operation, administrative and financial support mechanism and others. Research process involved the review of previous studies in 2001 and 2003, comparison of the grant program with other grants in and out of Korea for environment education, and the following areas considered when identifying improvement options: i) Overall review of objectives and operations, ii) expansion supports programs oriented problem solving as well as those focused ecological sensitivity, iii) change from expendable, one-time program to productive, continuous program, iv) link to social changes and issues, v) principles for operation and evaluation, vi) criteria and methods for program selection and evaluation, and vii) improving operation system. Based on review and the overall evaluation on the experiential environmental education program grant, the recommendation for improving operation system were provided, which included stages of passive improvement, active improvement and building infrastructure for environment education, and building capacity of the members related in the initiatives.

• BMB Reports
• /
• v.52 no.3
• /
• pp.220-225
• /
• 2019

We have identified a mechanism to diminish the proliferative capacity of cells during cell expansion using human adipose-derived stromal cells (hAD-SCs) as a model of replicative senescence. hAD-SCs of high-passage numbers exhibited a reduced proliferative capacity with accelerated cellular senescence. Levels of key bioactive sphingolipids were significantly increased in these senescent hAD-SCs. Notably, the transcription of sphingosine kinase 1 (SPHK1) was down-regulated in hAD-SCs at high-passage numbers. SPHK1 knockdown as well as inhibition of its enzymatic activity impeded the proliferation of hAD-SCs, with concomitant induction of cellular senescence and accumulation of sphingolipids, as seen in high-passage cells. SPHK1 knockdown-accelerated cellular senescence was attenuated by co-treatment with sphingosine-1-phosphate and an inhibitor of ceramide synthesis, fumonisin $B_1$, but not by treatment with either one alone. Together, these results suggest that transcriptional down-regulation of SPHK1 is a critical inducer of altered sphingolipid profiles and enhances replicative senescence during multiple rounds of cell division.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.1
• /
• pp.31-36
• /
• 2021

Recently, automobile air conditioning systems have applied an alternative refrigerant that can replace the high GWP refrigerant R134a due to the global warming problem. This study simulated the performance of an automobile climate control system with an internal heat exchanger and TXV. Refrigerant R1234yf was applied as the working fluid. Amesim, a commercial software program, was used to model the main components of the compressor, condenser, TXV, evaporator, and internal heat exchanger. As the outside temperature increased from 30℃ to 40℃, the cooling capacity of the system decreased by 3.1%, and the power consumption of the compressor increased by 17.1%. In addition, The performance characteristics of the refrigeration cycle were simulated by increasing the fin pitch of the condenser from 0.8 mm to 1.4 mm. When the fin pitch was larger than 1.0 mm, the condenser capacity decreased, and the system COP was lowered by 5.9%. When the fin pitch of the condenser was 0.8 mm, which was smaller than 1.0 mm, there was no significant change in the system performance. Hence, the optimal performance was observed at a fin pitch of 1.0 mm.

• Journal of Energy Engineering
• /
• v.24 no.3
• /
• pp.74-81
• /
• 2015

Currently, the government is encouraging the introduction of energy storage system to reduce carbon emissions and peak power demand. The government is planning the cumulative capacity of ESS of 2GW in 2020. By utilizing charge and discharge of the ESS, it is possible to sell the surplus power to utility and electricity market. This paper suggests the model that economic feasibility of energy storage system for planning the construction of power generation facilities in 2035. Our results of simulation indicate the energy storage plan of utility for constructing renewable energy facilities is need to incentives from the government to encourage power utilities and expansion of ESS.

• Journal of Digital Convergence
• /
• v.11 no.4
• /
• pp.467-472
• /
• 2013

Recently, the value of ICT-based medical devices, equipments, software and service development are is increased according to strengthening the convergence among ICT, medical technologies and services. This paper presents the new convergence business models by applying cloud service to medical industry. In order to develop the new convergence business models, we checked the validity and feasibility through analyzing the medical market environments such as medical data backup, medical regulation etc. and present the new convergence business models and the direction of commercial business models for customer acquisition, market expansion and competitiveness improvement. This study is to provide the guidelines for establishing the core capacity strengthening strategy and partnership cooperation strategy when we design a new convergence business models in various industrial fields.

• Journal of the Korean Home Economics Association
• /
• v.28 no.4
• /
• pp.41-50
• /
• 1990

Soy protein was isolated from Korean soy bean 'Chang ryub' and chemically modified with succinic anhydride. Functionality of the soy protein isolate(SPI), succinylated SPI(SPPI), and PP590(commercial) at various pH were investigated. The mechanical and sensory properties of soy bean curds made from several mixing ratio of succinylated soy bean milk were observed. The solubility of SPI significantly increased with succinylation. The solubility of PP590 was lower than that of SSPI. The solubility of SPPI increased significantly in 0.03M CaCl2 solution. The emulsifying activity of SSPI increased. On the range of pH above pI the emulsifying activity of PP590 was higher than that of SPI. There was no difference in emulsion stability among the groups. The foam expansion capacity of SPPI increased at higher pH than pI but the foam stability decreased significantly above pH 9. Mechanical texture profile analysis revealed the modified soy bean curds had the lower hardniss, chewiness and cohesiveness with increased modification. The mechanical characteristics of modified soy bean curds revealed generalized Maxwell Model of 7-elements or 5-elements. In sensory evaluation, the hardness, the springiness and acceptability of modified soy bean curds were lower significantly than those of control soy bean curd.