• 한국정밀공학회지
• /
• 제18권10호
• /
• pp.200-207
• /
• 2001

Burrs farmed in drilling are classified into three types, no burr, burrs with cap, teared burr. To control burr size in drilling, the second type burrs with cap are to be formed because it is small and uniform. It is necessary to understand the mechanism of cap formation to derive the burr formation into second type burr with cap. In several materials. second type burrs are formed in drilling by changing cutting conditions. It is observed that cap is formed as a result of the plastic deformation along the outside of exit hope. According to the tension behavior of the material in concentrated region between hole and drill outside edge, the geometry of burr with cap is determined. Simplified 2D FEM analysis shows good prediction for burr formation.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.823-826
• /
• 2000

Burr formed in drilling are classified into three types. no burr, burrs with cap, teared burr. To control burr size in drilling. the second type burrs with cap are to be formed because it is small and uniform. It is necessary to understand the mechanism of cap formation to derive the burr formation into second type burr with cap. In several materials, second type burrs are formed in drilling by changing cutting conditions. It is observed that cap is formed as a result of the plastic deformation along the outside of exit hole. According to the tension behavior of the material in concentrated region between hole and drill outside edge, the geometry of burr with cap is determined.

• 한국식품영양과학회지
• /
• 제27권5호
• /
• pp.1015-1018
• /
• 1998

Capsaicin(8-methyl-N-vanillyl-6-nonenamide: CAP) known well as a major compound of not taste in hot pepper, was investigated for the inhibition effect on in vitro nitrosation. CAP(100$\mu$mol) inhibited the formation of N-nitrosoproline(NPRO) and N-nitrosothioproline(NTPRO) by 56% and 26%, respectively. Vanillyl alcohol inhibited the nitrosation of proline by a concentration-dependent manner, and vanillic acid and vanillin were less effective in blocking the nitrosation of proline compared to CAP and anillyl alcohol. The inhibitory effect of NPRO formation by CAP was evaluated to similar with alpha-tocopherol, and vanillyl alcohol was more effective than alpha-tocopherol in blocking the nitrosation of proline. Our results suggested that CAP and its metabolites such as vanillyl alcohol could inhibit endogenous nitrosation in hydrophobic biological environment.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.539-542
• /
• 2001

In SiC semiconductor device processing, it needs high temperature anneal for activation of ion implanted dopants. The macrosteps, 7~8nm in height, are formed on the surface of SiC substrates during activation anneal. We have investigated the effect of thermally-grown SiO$_2$layer on the suppression of macrostep formation during high temperature anneal. The cap oxide layer was found to be efficient for suppression of macrostep formation even though the annealing temperature is as high as the melting point of SiO$_2$. The thin cap oxide layer (10nm) was evaporated during anneal then the macrosteps were formed on SiC substrate. On the other hand the thicker cap oxide layer (50nm) remains until the anneal process ends. In that case, the surface was smoother and the macrosteps were rarely formed. The thermally-grown oxide layer is found to be a good material for the suppression of macrostep formation because of its feasibility of growing and processing. Moreover, we can choose a proper oxide thickness considering the evaporate rate of SiO$_2$at the given temperature.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제36권6호
• /
• pp.466-472
• /
• 2010

Introduction: This study examined the effect of recombinant human bone morphogenetic protein (rhBMP)-2 and $\beta$-tricalcium phosphate ($\beta$-TCP) on new bone formation in a rabbit calvarium using a rapid prototype titanium cap (RP Ti cap). Materials and Methods: Eight New Zealand white rabbits were used in this study. Hemispherical RP Ti caps (10 mm in diameter) were implanted subperiosteally on the rabbit calvaria. $\beta$-TCP was filled in the RP Ti cap in the control group, and rhBMP-2 soaked $\beta$-TCP was used in experimental group. The rabbits were sacrificed 2 and 4 weeks after the operation. The volume and pattern of newly formed bone was analyzed by micro computed tomography (CT). Results: Macroscopically, there were no abnormal findings in any of the animals. The micro CT images revealed new bone from the calvaria that expanded gradually toward the top of the titanium cap, particularly along the inner surface of the titanium cap in the experimental group at 4 weeks after grafting. There was no significant difference in new bone volume ratio between the control and experimental groups at 2 weeks after grafting. There was a statistically significant difference in the new bone volume ratio between the experimental ($14.1{\pm}1.8\;%$) and control ($7.2{\pm}1.5\;%$) groups at 4 weeks after grafting (P<0.01). Conclusion: The RP Ti cap can effectively guide new bone formation and rhBMP-2 can induce the new bone formation.

• 한국균학회지
• /
• 제37권1호
• /
• pp.114-116
• /
• 2009

본 연구는 P. capsici의 난포자를 다량으로 확보하기 위하여 우수한 액체 배지를 선발하고 난포자의 발아율을 조사할 뿐만 아니라 $F_1$ progeny를 확보하기 위하여 수행하였다. 공시한 8개 액체배지 중 carrot broth와 V8C broth가 난포자형성을 위해 가장 적당한 배지였다. 총 11균주의 P. capsici(CapA형)과 P. tropicalis(CapB형)를 선발하였고 P. capsici(CapA형)에 P. tropicalis(CapB형)을 교배하는 서로 다른 9개 조합의 교배에서 얻은 난포자로부터 총 129 균주의 $F_1$ hybrid progeny를 얻었으며 난포자의 발아율은 0.64-4.0%(평균 1.85%)이었다.

• 한국정밀공학회지
• /
• 제17권3호
• /
• pp.114-121
• /
• 2000

A new concept drill was developed recently (or increasing accuracy and productivity in drilling operation. The burr formation in drilling causes many problems in deburring operation because burrs are formed inside holes and it is difficult to remove them. Burr formations are observed in drilling operation with a new concept drill and are compared with conventional HSS drill. Several workpieces with different materials are drilled with several cutting conditions, velocity and feed rate. The burr in drilling can be classified into three types according to the location of crack. To observe the burr formation mechanism, the cap which is formed with the new concept drill is observed and measured.

• 마이크로전자및패키징학회지
• /
• 제26권2호
• /
• pp.31-43
• /
• 2019

본 연구에서는 유연한 접속부를 갖는 유연전자 패키지 플립칩 접속을 위해 폴리머 탄성범프를 제작하였으며, 범프의 온도 및 하중에 따른 폴리머 탄성 범프의 점탄성 및 점소성 거동을 해석 및 실험적으로 분석하고 비교 평가하였다. 폴리머 탄성 범프는 하중에 의한 변형이 용이하여 범프 높이 평탄도 오차의 보정이 용이할 뿐만 아니라 소자가 형성된 칩에 가해지는 응력 집중이 감소하는 것을 확인하였다. 폴리머 탄성 범프의 과도한 변형에 따른 Au Metal Cap Crack 현상을 보완하여 $200{\mu}m$ 직경의 Spiral Cap Type, Spoke Cap type 폴리머 탄성 범프 형성 기술을 개발하였다. 제안된 Spoke Cap, Spiral Cap 폴리머 탄성 범프는 폴리머 범프 전체를 금속 배선이 덮고 있는 Metal Cap 범프에 비해 범프 변형에 의한 응력 발생이 적음을 확인할 수 있으며 이는 폴리머 범프 위의 금속 배선이 부분적으로 패터닝되어 있어 쉽게 변형될 수 있는 구조이므로 응력이 완화되는데 기인하는 것으로 판단된다. Spoke cap type 범프는 패드 접촉부와 전기적 접속을 하는 금속 배선 면적이 Spiral Cap type 범프에 비해 넓어 접촉 저항을 유지하면서 동시에 금속 배선에 응력 집중이 가장 낮은 결과를 확인하였다.

• 마이크로전자및패키징학회지
• /
• 제15권4호
• /
• pp.31-39
• /
• 2008

캐비티 형성이 불필요한 MEMS 캡 본딩을 위해 전기도금법을 이용하여 Cu/Sn rim 구조를 형성하였으며, $25{\sim}400{\mu}m$ 범위의 rim 폭에 따른 본딩특성을 분석하였다. Cu/Sn rim의 폭이 증가함에 따라 rim 패키지 내부의 유효 실장면적비가 감소하는 반면에 파괴하중비가 증가하며, Cu/Sn rim 폭이 150 ${\mu}m$일 때 유효 실장면적비와 파괴하중비를 최적화할 수 있을 것으로 예측되었다. 폭 25 ${\mu}m$ 및 폭 50 ${\mu}m$인 Cu/Sn rim 접합부에서는 모든 계면에서 본딩이 이루어진 반면에, 100 ${\mu}m$ 이상의 폭을 갖는 rim 접합부에서는 Sn 도금표면의 거칠기에 의해 본딩이 이루어지지 않은 기공 부위가 관찰되었다.

• International Journal of Oral Biology
• /
• 제36권4호
• /
• pp.195-201
• /
• 2011

Matrix metalloproteinases (MMPs) have been implicated in tissue development and re-modeling. Dynamic morphological changes of tooth germs reflect involvement of these enzymes during odontogenesis. The present study was performed to investigate expression and localization of MMP-2 and MMP-9, which have been known to have type IV collagenase activities, in rat tooth germs at different developmental stages. MMP-2 expression was increased gradually in the tooth germs from cap to crown staged germs at both transcription and translation levels. The localization of this molecule was detected in secretory ameloblasts and preameloblasts. The strong immunoreactivities were occasionally seen along the basement membrane between ameloblasts (or preameloblasts) and odontoblasts (preodontoblasts). However, weak reactivity was detected in odontoblasts and reduced enamel epithelium. The level of MMP-9 expression in the tooth germs was higher in cap stage than in crown staged germs at both transcription and translation levels. They were strongly expressed in both ameloblasts and odontoblasts. Even though reduced enamel epithelium after enamel formation and inner enamel epithelium at the cap stage exhibited weak reactivity, strong reactivity was detected in dental follicles and perifollicular tissues surrounding cap staged germs. These results suggested that MMP-2 may involve degradation of the basement membrane during hard tissue formation, whereas MMP-9 might be involved in remodeling of follicular tissues.