• 한국항공우주학회지
• /
• 제32권10호
• /
• pp.20-27
• /
• 2004

본 논문에서는 CRW 무인 항공기에 사용되는 타원익형과 전기체의 공력해석 및 동체와 로터를 연결하는 허브주위의 공기역학적 현상에 대한 분석을 수행하였고 허브로 인한 항력 증가를 감소할 수 있는 방안을 모색하였다. 또한 항력 감소를 위해 제안한 fairing 장착방법을 풍동시험을 통해 그 효과를 확인하였다.

• 한국항공운항학회:학술대회논문집
• /
• 한국항공운항학회 2016년도 춘계학술대회
• /
• pp.9-13
• /
• 2016

Reaction drive rotor system is capable of providing hover and low speed capabilities to different aircraft concepts such as stopped rotor wing, canard rotor wing, compound gyroplane etc. Existing sizing and analysis tools for shaft drive rotor system cannot be applied directly to this system. The available methodologies to size this system were reviewed. Power available calculation procedure and factors affects it were addressed prior to sizing process. Various design issues of this system due to interrelationship of internal gas flow dynamics and rotor external aerodynamics was discussed. Finally, a modification that is required in existing sizing methodologies was identified and combined approach in sizing process to consider the interrelationship among engine, rotor and blade duct was introduced.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2003년도 제21회 추계학술대회 논문집
• /
• pp.215-218
• /
• 2003

본 연구에서는 회전익 상태에서 이/착륙, 저속 전진비행을 하고, 고정익 상태에서 고속 전진비행을 하는 스마트 무인기 추진시스템을 모델링하고 회전익 모드, 고정익 상태의 고속 비행모드, 팁 제트 노즐과 주 엔진 노즐을 모두 이용하는 혼합모드에 대해 정상상태 성능해석을 수행하였다.

• International Journal of Aeronautical and Space Sciences
• /
• 제2권1호
• /
• pp.103-109
• /
• 2001

Productivity enhancement program of wind tunnel testing has begun at Korea Aerospace Research Institute Low Speed Wind Tunnel (KARI LSWT). A previous test record of a canard airplane model was adopted to examine the current status of wind tunnel testing efficiency. The time consumed to perform testing activities from the model preparation to data collection was broken down and the results were compared with those of the recent Boeing low speed test result. The efforts to improve the wind tunnel productivity consisted of the installation of mini crane underneath of test section, fabricating lift device for image fairings, model configuration changing rigs and the modifications of external balance system. Time reductions for changing strut interface platform and installation of image fairings. These effects showed more than 70% improvement over the previous test time. Integration of the new and modified systems will improve productivity of wind tunnel testing in KARI LSWT.

• 한국항공운항학회지
• /
• 제20권1호
• /
• pp.86-93
• /
• 2012

Fuzzy control has emerged as a practical alternative to classical control schemes in controlling certain time-varying, nonlinear, and ill-defined processes. As the current of this kind of a research paradigm, we concluded that there is a need for application study of a fuzzy control theory to the flight control systems of small aircraft being to be developed at KARI. And then, this preliminary study was carried out to the automatic landing system of the canard aircraft (Firefly) for the purpose of the preparation of extension of research contents and various application areas, in which FMRLC was chosen as the fuzzy controller of the system.

• 한국항공운항학회지
• /
• 제14권2호
• /
• pp.71-78
• /
• 2006

In this paper, it is described on the exportation trend and future development paradigm of the localized small aircraft which was recently developed four seated canard type aircraft for exportation purpose. Presently, even though the development of small aircraft is recessed, if we start development of the proper airplane models by integrating domestic power of industry-university-institute on the base of research experience from now on, we can go into the global market and take up the level of world top 10 makers without doubt. For successful operation of exportation system of small aircraft, it is needed to set up development strategy paradigm by forming consortium centering around the medium and small enterprises.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2004년도 제22회 춘계학술대회논문집
• /
• pp.521-523
• /
• 2004

The Japan Aerospace Exploration Agency (JAXA) has proposed new vertical take-off and landing (VTOL) aircraft known as the Jet-VTOL aircraft shown in Fig.1. The Jet-VTOL aircraft is based on a canard wing configuration. The aircraft has the clustered lift-fans mounted near the center of gravity for vertical flight, and has the clustered fans mounted beside the vertical tail for cruise flight. Both fans are driven by the core engine mounted inside the aft end of fuselage. The propulsion system is innovative and attractive not to be seen even in the world.

• 한국군사과학기술학회지
• /
• 제11권4호
• /
• pp.5-12
• /
• 2008

There are some ways to improve precision of conventional munitions by low-cost method. 2D Course Correction Munition(CCM) is one of those ways, which is a 155mm projectile integrated with 2D Guidance Fuze(GF) instead of conventional fuze. 2D GF can correct the projectile trajectory and minimize range and deflection errors from its aimpoint using canard control. In this paper 2D CCM system concept is introduced and its course correction capability is analyzed using PRODAS.

• 항공우주기술
• /
• 제4권1호
• /
• pp.1-8
• /
• 2005

미감항규정인 FAR과 이에 기반한 하중해석 절차를 설명하였다. 하중해석을 위해서는 규정과 하중조건을 준비하고, 공기력, 중량 및 구조 모델링을 수행해야 한다. 항공기 비행하중 해석시 공기력은 일반적으로 패널방법을 이용하여 산출하게 된다. 본 연구에서는 하중해석을 위해 In-house 프로그램인 ARGON을 사용하였다. ARGON은 KARI와 TsAGI가 공동 개발한 고정익 항공기 설계 프로그램으로서 비행하중, 지상하중, 플러터 및 응력해석을 지원한다. 본 논문에서는 ARGON을 이용하여 4인승 선미익 항공기 개발에 있어 필수적인 비행하중 해석을 수행하였고 그 결과를 제시하였다.

• 항공우주기술
• /
• 제6권1호
• /
• pp.1-6
• /
• 2007

본 연구에서는 상온에서 수작업으로 함침/경화시킨 일 방향 glass/epoxy 복합재료 적층판의 설계압축강도 값을 제시하고 있다. 총 39개의 시편으로부터 측정된 압축강도 값은 two-parameter Weibull 분포를 따른다고 가정하였다. MIL-HDBK-17F에 제시된 방법과 절차에 따라 동일형상의 복합재료 시편에 대해 구한 B-Basis 값과 A-Basis값은 각각 평균 압축강도의 82.6% 및 65.9%로 확인되었다. 항공기 주익의 스파 Cap에 동일 복합재료를 적용할 경우를 고려하여 B-base 값의 50%를 설계압축강도 값으로 산정하였다.