• Imaging Science in Dentistry
• /
• 제50권2호
• /
• pp.141-151
• /
• 2020

Purpose: This study aimed to quantify the influence of tooth position within the field-of-view (FOV) on cone-beam computed tomography (CBCT) imaging artifacts' intensity when assessing teeth restored with various intracanal materials. Materials and Methods: Seventy single-rooted teeth were divided into 7 groups (10 teeth per group): NiCr post (NC), AgPd post (AP), metal core fiberglass post (MCFG), fiberglass post (FG), anatomical fiberglass post (AFG), fiberglass post cemented with core build-up cement (FGCo), and anatomical fiberglass post cemented with core build-up cement (AFGCo). All posts were cemented using a regular dual-curing resin cement (Allcem), except FGCo and AFGCo which were cemented with a core build-up dual-curing resin cement (AllcemCore). Each tooth was scanned on a CS9000 in 5 positions within the FOV: a central position, anterior horizontal peripheral, peripheral superior, peripheral inferior, and posterior horizontal peripheral position. Hyperdense, hypodense, remaining teeth areas and ROI areas were quantitatively analyzed using ImageJ software. Results: Posterior horizontal peripheral position increased the intensity of artifacts on FGCo and AFGCo post groups (P<0.05), and specifically the hypodense artifact intensity on FG and AFG post groups (P<0.05). NC and AP groups presented greater intensity of artifacts than any other post groups(P<0.05). Conclusion: Artifact intensity increases in the presence of high atomic number materials and when the object is not centered within the FOV. The impact of positioning within the FOV on artifact was greater for fiberglass posts cemented with core build-up dual-curing cement than for metal posts and fiberglass posts cemented with regular dual-curing cement.

• Restorative Dentistry and Endodontics
• /
• 제42권1호
• /
• pp.19-26
• /
• 2017

Objectives: Recently, bioceramic sealers like EndoSequence BC Sealer (BC Sealer) have been introduced and are being used in endodontic practice. However, this sealer has limited research related to its retreatability. Hence, the aim of this study was to evaluate the retreatability of two sealers, BC Sealer as compared with AH Plus using micro-computed tomographic (micro-CT) analysis. Materials and Methods: Fifty-six extracted human maxillary incisors were instrumented and randomly divided into 4 groups of 14 teeth: 1A, gutta-percha, AH Plus retreated with chloroform; 1B, gutta-percha, AH Plus retreated without chloroform; 2A, gutta-percha, EndoSequence BC Sealer retreated with chloroform; 2B, gutta-percha, EndoSequence BC Sealer retreated without chloroform. Micro-CT scans were taken before and after obturation and retreatment and analyzed for the volume of residual material. The specimens were longitudinally sectioned and digitized images were taken with the dental operating microscope. Data was analyzed using an ANOVA and a post-hoc Tukey test. Fisher exact tests were performed to analyze the ability to regain patency. Results: There was significantly less residual root canal filling material in the AH Plus groups retreated with chloroform as compared to the others. The BC Sealer samples retreated with chloroform had better results than those retreated without chloroform. Furthermore, patency could be re-established in only 14% of teeth in the BC Sealer without chloroform group. Conclusion: The results of this study demonstrate that the BC Sealer group had significantly more residual filling material than the AH Plus group regardless of whether or not both sealers were retreated with chloroform.

• Restorative Dentistry and Endodontics
• /
• 제29권6호
• /
• pp.515-519
• /
• 2004

Straight access cavity design allows the operator to locate all canals, helps in proper cleaning and shaping, ultimately facilitates the obturation of the canal system. However, change in the fracture strength according to the access cavity designs was not clearly demonstrated yet. The purpose of this study was to determine the influence of different access cavity designs on the fracture strength in endodontically treated mandibular anterior teeth. Recently extracted mandibular anterior teeth that have no caries, cervical abrasion, and fracture were divided into three groups (Group 1 : conventional lingual access cavity, Group 2 : straight access cavity, Group 3 : extended straight access cavity) according to the cavity designs. After conventional endodontic treatment, cavities were filled with resin core material. Compressive loads parallel to the long axis of the teeth were applied at a crosshead speed of 2mm/min until the fracture occurred. The fracture strength analyzed with ANOV A and the Scheffe test at the 95% confidence level. The results of this study were as follows: 1. The mean fracture strength decrease in following sequence Group 1 (4558.90{\;}\pm{\;}77.40{\;}N$), Group 2 ($494.07{\;}\pm{\;}123.98{\;}N) and Group 3 ($267.33{\;}\pm{\;}27.02{\;}N). 2. There was significant difference between Group 3 and other groups (P = 0.00). Considering advantage of direct access to apical third and results of this study, straight access cavity is recommended for access cavity form of the mandibular anterior teeth.

• Restorative Dentistry and Endodontics
• /
• 제25권3호
• /
• pp.381-389
• /
• 2000

Lateral condensation with gutta-percha and sealer has been shown to provide an excellent apical seal; however, the lateral condensation technique has demonstrated less favorable apical leakage results in curved canals when compared with straight canals. Placement of endodontic spreaders to within 1 to 2mm of the root canal working length has been advocated for optimum gutta-percha obturation. Due to their stiffness, stainless-steel(SS) spreaders will often fail to achieve this position in curved canals. Newly marketed nickel-titanium(NT) spreaders may offer an advantage in this regard due to the increased flexibility of these instruments. The purpose of this study was to evaluate the effect of NT finger spreader on the sealing ability in lateral condensation technique, compared with conventional SS finger spreader. Twenty four standardized resin models simulating curved canals(30 degree) were randomly placed into 2 groups and instrumented to a #30 master apical file size with Ni-Ti Profile .04 taper series using step down technique. Each groups was obturated with standardized gutta-percha cone by standard lateral condensation technique using SS finger spreader, NT finger spreader. And then, each model was sectioned horizontally with microtome at 1, 2, 3, 4, 5mm levels from the apex. At each of 5 levels, ratio of the area of gutta-percha was obtained by calculating the area of gutta-percha to the total area of the canal. The data collected were then analyzed statistically using a t test for independent samples. The results as follows ; 1. The total mean ratio of area of gutta-percha was 89.20${\pm}$7.00(%) for SS spreader group. 92.20${\pm}$5.17(%) for NT spreader group. There was statistically significant difference between each group(p<0.05). 2. At 3mm level, the mean ratio of area of gutta-percha was 88.32${\pm}$5.41(%) for SS spreader group, 95.25${\pm}$2.60(%) for NT spreader group. There was statistically significant difference between each group(p<0.05). At 1,2,4mm levels, NT spreader group showed greater mean ratio of area of gutta-percha than SS spreader group, too. But there was no statistically significant difference. 3. At 5mm level, the mean ratio of area of gutta-percha was 91.83${\pm}$3.42(%) for SS spreader group, 87.91${\pm}$3.68(%) for NT spreader group. There was statistically significant difference between each group(p<0.05). This study concluded that the NT spreader demonstrated somewhat favorable apical sealing effect than SS spreader in prepared curved canals. The clinical use of NT spreaders may enhance our ability to create better apical seals in curved canals, but further studies in this area will help clarify some of the remaining areas with which practitioners are concerned, such as compaction forces exerted by NT spreaders.

• 치위생과학회지
• /
• 제16권4호
• /
• pp.317-322
• /
• 2016

최근 성장 중인 아동에서 치근의 성장이 계속됨에 따라 치수가 괴사되어 치근의 병변이 있는 미성숙 영구치에서도 치수의 재혈관화(revascularization)가 실제로 일어날 수 있다는 가능성이 제시되고 있다. 소아치과영역에서 자주 접하게 되는 미성숙 영구치의 치근단 형성술의 목적은 열린 치근단에서 세균 침입을 제한하고 치근단 장벽 형성을 촉진하는 것이다. 미성숙 치아의 근관 치료에서 기존의 수산화칼슘을 이용한 치근단 형성술은 빈번한 내원과 장기간 소요되는 치료 기간, 환자협조 요구, 최종 처치의 지연, 장기간의 수산화칼슘 적용 이후 치아 파절 가능성의 증가 등의 단점이 보고되었다. 기존의 수산화칼슘 치근단형성술의 대체방법으로 MTA를 이용한 1-visit 치근단형성술을 시행하고 있다. MTA는 1990년대 초반 근관치료 분야에서 다양한 적용을 위해 개발되었다. MTA의 우수한 임상적 성질에 힘입어 국내에서도 OrthoMTA 및 Endo CEM 등의 mineral aggregate 제품이 출시되어 있다. 따라서 본 증례에서는 우리나라의 청소년에서 MTA 적용한 사례를 보고하는 데 있다. 이 연구를 통해 MTA를 이용하여 진료하는 임상가에게 소개하고자 한다. 이 연구는 11~12세의 파절이 된 치아에 MTA를 적용하여 근관 치료를 하였다. 치료 받은 환자의 치아 상태를 12개월 동안 추적 관찰하였고, 국내에서 개발된 OrthoMTA를 이용한 치근단형성술을 시행한 후 임상적 및 방사선학적 관찰 결과를 통해 근관치료재생술(REP)에 관한 만족할 만한 결과를 얻었으며, 치수괴사가 생긴 경우에서도 성공적으로 치수재생술을 적용할 수 있다는 정보를 제공하고 그 결과를 공유하기 위함이다.

• Restorative Dentistry and Endodontics
• /
• 제25권4호
• /
• pp.536-542
• /
• 2000

임상에서 점차 Mineral Trioxide Aggregate (MTA)에 대한 우수성이 소개되면서, apical matrix로의 사용은 주목할 만하다 할 수 있다. 본 연구의 목적은 개방형근관에서 MTA가 apical matrix로 사용될 때의 치근단 밀폐효과를 알아 보고, 근관충전의 시기와 matrix의 두께가 치근단 밀폐에 미치는 영향을 치근단 미세누출의 측면과 matrix탈락빈도의 측면에서 관찰하고자 하는 것이다. 개방형 근관을 재현하고자 45개의 발거된 단근치에 #90크기로 근단공을 형성하였고, 투명레진등을 이용하여 치근단 병소를 갖는 치조골을 재현한 후, 4개의 실험 군과 1개의 대조 군으로 분류하였다. A군: 2mm두께의 MTA matrix 형성후, 열연화된 Gutta-percha와 AH26 sealer를 이용하여 즉시 근관충전. B군: 2mm 두께의 MTA matrix 형성후, A군과 같은 방법으로 24시간 후 근관충전. C군: 4mm 두께의 MTA matrix 형성후, A군과 같은 방법으로 즉시 근관충전. D군: 4mm 두께의 MTA matrix 형성후, A군과 같은 방법으로 24시간 후 근관충전. 대조군: matrix를 사용하지 않고 열연화된 Gutta-percha와 AH26 sealer를 이용하여 근관충전하였다. Matrix의 탈락이 있는 경우 기록하고 완전 수세 후 다시 시행하였다. 색소침투정도의 평가를 위해 methylene blue에 치아를 48시간 침수시킨 후 협설로 양분하였다. 각 시편들을 고배율 현미경 관찰 후 비디오촬영 하였고, digitalized image analysing program을 이용하여 두명의 관찰자가 누출의 정도를 평가한 후, One-way ANOVA로 통계적 유의성을 검증하여 다음과 같은 결과를 얻었다. 1. Matrix를 사용한 실험 군이 matrix를 사용하지 않은 대조 군에 비해 유의성 있게 낮은 누출을 보였다(p<0.05). 그러나 근관충전시기와 matrix의 두께를 달리한 실험군 내에서는 누출에 유의성 있는 차이가 나타나지 않았다. 2. 모든 실험군에서 gutta-percha를 이용한 근관충전의 시기에 matrix탈락 및 gutta-percha의 압출은 발생하지 않았다.

• 대한소아치과학회지
• /
• 제28권4호
• /
• pp.700-708
• /
• 2001

소아환자에 있어 외상성 손상은 미완성된 치근의 발육을 방해할 수 있다. 미완성된 치아의치수가 괴사된 경우 근관은 완전히 세척되어져야 한다. 그러나 apical stop이 부족하고 얇고 부서지기 쉬운 치수벽 때문에 적절한 apical seal을 얻기 위해서는 치근단 형성술을 시행해야 한다. 지금까지 수산화 칼슘이 치근단 형성술의 선택약제가 되어왔다. 그러나, 수산화칼슘을 이용한 치근단 형성술은 치료시기가 다양하고, apical closure도 불확실하며, 환자 follow up이 어렵고, 치료가 늦어지는 한계가 있다. 이에 인공적인 apical barrier를 형성시켜 근관의 즉각적인 충전을 할 수 있는 MTA(Mineral Trioxide Aggregate, DENTSPLY Tulsa Dental, U.S.A)를 이용하였다. MTA는 tricalcium silicate, tricalcium aluminate, tricalcium oxide와 silicate oxide와 같은 친수성 입자로 구성된다. 또한 소량의 mineral oxide와 bismuth oxide powder를 포함한다. MTA는 경화후 pH가 수산화칼슘 또는 $Ca(OH)_2$와 유사한 12.5로 항균작용을 지닌다. 용해도가 낮고, 상아질보다 약간 더 큰 방사선 불투과성을 보인다. 또한 다른 재료들보다 미세누출이 상당히 적고 다른 재료들보다 경조직 형성 능력이 뛰어나다. 본 증례는 전북대학교 소아치과에 외상으로 인해 치근단이 미완성된 미성숙 영구치의 치근단 형성술을 위해 내원한 환아에 대해 MTA를 적용하여 양호한 결과를 얻었기에 이에 보고하는 바이다.

• Restorative Dentistry and Endodontics
• /
• 제25권1호
• /
• pp.144-152
• /
• 2000

Intracoronal bleaching is currently disregarded by many clinicians because of the potential consequence of cervical resorption. To prevent this complication it is recommended that intra coronal barrier materials be placed over the root canal obturation and sodium perborate be used with water rather than with hydrogen peroxide. The purpose of this study was to evaluate the amount of the hydrogen peroxide penetration according to the difference in intracanal base materials and sodium perborate preparation. Fifty extracted intact premolars were instrumented, and filled with gutta-percha. And then the outer surface of the teeth was sealed with wax exposing the CEJ. The prepared teeth were placed in plastic tubes containing 1.5ml distilled water with their entire root submerged into the solution, The teeth were divided into the following five groups. In the first two groups gutta-percha was removed without placement of barrier, and then water or superoxole(30% $H_2O_2$) with sodium perborate were used respectively for bleaching. In the other three groups, after removal of gutta-percha, an intracanal isolating barrier(ZPC, IRM, Fuji II LC) was placed and then bleached with sodium perborate and superoxole. The bleaching procedure was performed 4 times with 1 week interval. The results were as follows : 1. All the groups showed a tendency of increasing penetration amount with increasing treatment times(P<0.05). 2. After the 1st and 2nd treatments, there was no significant difference in microleakage among the groups. 3. After the 3rd bleaching with superoxole and sodium perborate, there was no significant difference in microleakage between gutta-percha alone group and gutta-percha with ZPC, Fuji II LC barrier group. But significant difference was found between IRM barrier group and other groups(P<0.01). 4. After the 4th bleaching with superoxole and sodium perborate, there was no significant difference between gutta-percha alone group and gutta-percha with barrier groups. 5. After the 4th treatment, the group bleached with sodium perborate and water without barrier showed lower hydrogen peroxide penetration than that of other groups(P<0.01).

• Restorative Dentistry and Endodontics
• /
• 제31권3호
• /
• pp.186-191
• /
• 2006

본 연구의 목적은 근관내 약제로 사용되는 수산화칼슘의 제거방법이 근관충전 후 치근단 미세누출에 미치는 영향을 알아보기 위함이다. 70개의 발거된 단근치를 엔진구동형 ProFile로 근관형성한 후 수용성 수산화칼슘 제제를 1주일간 적용하고 두 군으로 나누어 각기 다른 방법으로 제거하였다. A군은 NaOCl로 근관세정만을 시행하였으며, B군은 근관형성 시 사용된 file보다 한 단계 큰 크기의 ProFile을사용하여 근관을 재형성한 후 NaOCl로 세척하였다. 근관충전 후 전기화학적 방법으로 24일 동안 치근단 누출을 측정, 비교하였다. 본 연구의 결과 수산화 칼슘 제거를 위한 두가지 방법은 근관충전후 치근단 미세누출에 있어서 차이가 없음을 알 수 있었다.

• 대한치과재료학회지
• /
• 제45권4호
• /
• pp.311-320
• /
• 2018

본 연구의 목적은 서로 다른 온도 설정을 받았을 때 열가소성 가타퍼차의 흐름성 특성을 평가 해보고자 현재 임상에서 사용되는 가타퍼차 4개 제품을 연질, 중질, 경질로 분류하여 실험하였으며, 실험시편은 24시간 동안 $(23{\pm}2)^{\circ}C$, ($50{\pm}5$) % 상대습도 조건으로 하여 ISO 1133-1:2011의 제시에 따라 레오미터(Melt flow indexer MFI-10, DAVENPORT, England)로 측정했다. 가타퍼차 재료의 열화 온도는 $108^{\circ}C$, $160^{\circ}C$, $200^{\circ}C$의 온도로 하고 하중은 2.16 ㎏, 3.8 ㎏으로 설정했으며 시편은 레오미터 가압과정에 적합하도록 약 5 mm 단위로 잘랐으며, Preheating time 5 분, Cutting time은 5~240초, 샘플은 10 g 으로 하여 실험한 결과 $108^{\circ}C$, $160^{\circ}C$의 온도에서는 흐름성 성질에 변화가 없었으나 $200^{\circ}C$까지 열화하면 흐름성 성질이 변화되는 것으로 나타났다. 가압 하중은 2.16 ㎏과 3.8 ㎏으로 하여 측정한 결과 하중은 흐름성 특성에 영향을 미치지 않았으나 열가소성 가타퍼차의 흐름성 측정의 경우 온도와 Cut-off time의 설정이 매우 중요한 것으로 조사 되었다.