• 제목/요약/키워드: Can/Tappet Friction

검색결과 3건 처리시간 0.015초

밸브 간극에 따른 밸브트레인 거동 연구 (Study of Valve Train Motion According to Valve Clearance)

  • 민선기
    • 한국융합학회논문지
    • /
    • 제8권10호
    • /
    • pp.193-199
    • /
    • 2017
  • 기계적 태핏은 유압 태핏과 비교하여 원가와 마찰 손실을 줄일 수 있어 사용된다. 그러나 기계적 태핏은 캠과 밸브 사이의 간극을 조절하는 기능이 없으므로 밸브의 열팽창을 고려하여 캠과 밸브 사이의 거리를 측정하여 선정된다. 그러므로 충분한 워밍 업 후에는 밸브 간극이 거의 없지만 그 전에는 밸브 간극이 존재한다. 특히 냉간 작동 조건에서는 비교적 큰 편이고 소음과 진동 같은 문제를 발생시킬 수 있다. 본 논문에서는 밸브 간극을 변경시켜 가며 각각의 조건에서의 밸브 리프트, 속도, 가속도, 시팅 속도, 바운싱 높이 등에 대하여 시험과 해석을 통하여 연구되었다. 밸브 간극이 증가할수록 램프 구간이 감소하게 되어 밸브의 거동에 좋지 않은 영향을 미치는 것을 확인할 수 있었다.

밸브트레인 시스템 통합 설계 프로그램 개발 (Development of Integrated Valve Train System Design Program)

  • 조명래;김지운;오대윤;김지영;한동철
    • 대한기계학회논문집B
    • /
    • 제26권10호
    • /
    • pp.1364-1369
    • /
    • 2002
  • This paper introduces the development of the analysis and design program of valve train system. In order to verify the stability of design and improve the performance of system efficiently, it is required that integrated and interactive simulation program. The presented program is developed in the base of the object-oriented, capsulation, modulization, OLE (objected linking and embedding) and various design theory. It contains the expandability and flexibility of the structure. In addition to that, it is programmed to make the convenient user interface by using the visualization programming. This program can support the modification of the valve element as well as the development of the valve train system in the beginning of design. It is expected to save the cost and time for the design of valve train system.

피스턴마찰에 미치는 각 인자의 영향 (The influence of various factors on piston friction)

  • 이종태;이성열
    • 오토저널
    • /
    • 제5권1호
    • /
    • pp.45-53
    • /
    • 1983
  • There exist many kinds of frictions in internal combustion engine such as piston ring and skirt, cam and tappet, bearing friction etc. Among them, the frictions between piston ring, skirt and cylinder are particular. These frictions for motoring test are differ from that of firing test even though the temperature of cooling water and lubricating oil keep identically. The frictions for firing test are increased due to combustion pressure and products. The precise calculation of the friction is difficult. But we can assume that the friction is governed by the viscosity of lubricating oil and gas pressure of cylinder. And the viscosity of lubricating oil is dependant on gas temperature of cylinder, so the piston friction may be governed by gas pressure and temperature of cylinder. In this treatise, we propose the method of evaluating piston friction under the condition of constant engine speed, and we analyzed the behaviours and influence of factors concerned with the piston friction for output correction when the inlet pressure and temperature were varied. The main results are as follows: 1) The behaviours on the inlet conditions for the contact force of the piston rings and the viscosity of the lubricating oil concerned with piston friction are found. 2) The essential point the these behaviours is dependant on the cyclic variation following to the inlet conditions. 3) According to our analysis, It was observed that the viscosity of lubricating oil is more effective than the contact force to the piston rings.

  • PDF