• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2002년도 제35회 춘계학술대회
• /
• pp.185-192
• /
• 2002

This paper focused on the dynamic behavior of camshaft in a direct acting type valve train system. To investigate camshaft behavior, transient vibration analysis is performed by using the transfer matrix method. The camshaft is treated as lumped mass system supported by spring and damper. Front the presented analytical model, we could predict dynamic behavior of camshaft, shaft locus within bearing and bearing load. The presented mode and results will be very helpful to design the optimal camshaft and valve train system.

• 한국자동차공학회논문집
• /
• 제10권6호
• /
• pp.34-43
• /
• 2002

This paper focused on the dynamic behavior of camshaft in a direct acting type valve train system. To investigate camshaft behavior, transient vibration analysis is performed by using the transfer matrix method. The camshaft is treated as a lumped mass system supported by spring and damper, From the presented analytical model, we could predict dynamic behavior of camshaft, shaft locus within bearing and bearing load. The presented model and results will be very helpful to design the optimal camshaft and valve train system.

• 한국음향학회지
• /
• 제32권3호
• /
• pp.208-213
• /
• 2013

캠축의 진동 응답을 구하기 위해 캠축을 불균형 다단계 로터 베어링계로 해석하였으며, 복잡한 형상과 하중조건을 고려하여 유한요소법을 사용하였다. 유한요소 방정식을 유도한 후에 Newmark 법을 사용하여 진동 응답을 구하였다. V-8 엔진 캠축의 회전 진동 응답을 구하여 측정치와 비교하였다. 캠축의 변동 응력을 구하고, 응력 집중 효과를 고려한 다음에 Goodmann 식에 근거하여 피로 해석을 수행하였다. 캠축의 회전 진동에서는 굽힘 효과가 지배적이며, 인접하는 베어링 간격에 가장 큰 영향을 받는다. 캠축에 가해지는 하중의 변화가 클 경우에는 하중의 변화에 상응하여 시간에 따라 변화하는 베어링 계수를 적용하여야 함을 알 수 있었다.

• Tribology and Lubricants
• /
• 제25권4호
• /
• pp.265-269
• /
• 2009

The wear of the contact in the tappet accounts for the greatest portion of entire friction loss of an engine, leading to the occurrence of abnormal wear. The coated specimens for earn-tappet wear test were producted by using PVD-Sputtering coating method. It examined the friction characteristics occurring between the earn and the tappet by using the dedicated wear tester and found that the friction torque value was reduced through comparison testing with the existing part when the low friction coating was applied. So application of the low friction coating to actual vehicles will reduce the fuel economy and occurrence of noise-vibration.