• Proceedings of the Korean Information Science Society Conference
• /
• 2011.06b
• /
• pp.294-295
• /
• 2011

본 논문에서는 스마트폰의 카메라와 플래시를 이용한 Shape from Shading 방법으로 3차원 형상 취득을 위한 카메라와 플래시의 보정 기법을 제시한다. 영상에서 관찰되는 화소 값은 카메라의 반응곡선에 의해 비선형적으로 표현되고 렌즈의 왜곡으로 인해 3차원 형상 복원에 오차를 발생 시킨다. 기하학적(geometric) 보정과 방사량(radiometric) 보정, 플래시 보정을 수행함으로써 3차원 형상 복원의 오차를 줄인다.

• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10b
• /
• pp.1894-1898
• /
• 1991

A landmark tracking system(LTS) has been developed for use in locating objects in a manufacturing environment. The Landmark Tracking System is an integrated system which consists of a grey scale CCD camera, an image processor, an illumination system based on electronic flash, and software intended primarily for tracking retroreflective landmarks. The term "integreated" means that the camera electronics and the strobe electronics are directly linked to the computer system, governed by the same clock and under direct software control. A novel element in the LTS is that a pinhole is used for the optics.he optics.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2003.10a
• /
• pp.190-194
• /
• 2003

Two different types of nondestructive evaluation (NDE) techniques were employed to investigate the tensile behavior of ceramic matrix composites (CMCs). Two NDE methods, ultrasonic testing (UT) and infrared (IR) thermography, were used to assess defects and/or damage evolution before and during mechanical testing. Prior to tensile testing, a UTC-scan and a xenon flash method were performed to obtain initial defect information in light of UT C-scans and thermal diffusivity maps, respectively. An IR camera was used for in-situ monitoring of progressive damages. The IR camera measured temperature changes during tensile testing. This paper has presented the feasibility of using NDE techniques to interpret structural performance of CMCs.

• Journal of Broadcast Engineering
• /
• v.14 no.6
• /
• pp.807-810
• /
• 2009

This paper deals with a real-time image based relighting system for tangible video teleconference. The proposed image based relighting system renders the extracted human object using the virtual environmental images. The proposed system can homogenize virtually the lighting environments of remote users on the video teleconference, or render the humans like they are in the virtual places. To realize the video teleconference, the paper obtains the 3D object models of users in real-time using the controlled lighting system. In this paper, we use single color camera and synchronized two directional flash lights. Proposed system generates pure shading images using on and off flash images subtraction. One pure shading reflectance map generates a directional normal map from multiplication of each reflectance map and basic normal vector map. Each directional basic normal map is generated by inner vector calculation of incident light vector and camera viewing vector. And the basic normal vector means a basis component of real surface normal vector. The proposed system enables the users to immerse video teleconference just as they are in the virtual environments.

• The Journal of the Korea Contents Association
• /
• v.9 no.5
• /
• pp.91-98
• /
• 2009

Recent digital camera development tendency shows the higher ISO extension which enables a user to take a picture in deemed lighting condition without using a flash or another equipment. Also noise reduction function has been developed to adjust the higher ISO extension. But using the high ISO causes a lot of noises so that proper noise reduction function should be adjusted. So the manufacturers introduce the advanced noise reduction function with higher ISOs as the digital camera performance development. On the other hands, the defect of noise reduction is not widely open such as remaining noise in high ISOs and decreasing resolution. Therefore, in this research we verify and experiment the decrease of resolution by using noise reduction function on a digital camera. Moreover we analyze the results how much the noise reduction function effects to the image resolution. And we present the results as practical numerical values.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.48 no.6
• /
• pp.27-34
• /
• 2011

In this paper, we propose an active 3D shape acquisition method based on photometric stereo using camera and flash on a smartphone. Two smartphones are used as the master and slave, in which the slave projects illumination from different locations while the master captures the images and processes photometric stereo algorithm to reconstruct 3D shape. In order to reduce the error, the smartphone's camera is calibrated to overcome the effect of the lens distortion and nonlinear camera sensor response. We apply 5-point algorithm to estimate the pose between smartphone cameras and then estimate lighting direction vector to run the photometric stereo algorithm. Experimental result shows that the proposed system enables us to use smartphone as a 3D camera with low cost and high quality.

• Journal of the Institute of Convergence Signal Processing
• /
• v.4 no.2
• /
• pp.25-30
• /
• 2003

Recently, development of digital technology is occupying a large part of multimedia information like character, voice, image, video, etc. Research about video indexing and retrieval progresses especially in research relative to video. In this paper, we propose new algorithm(Frame Feature Comparison) for MPEG video segmentation. Shot, Scene Change detection is basic and important works that segment it in MPEG video sequence. Generally, the segmentation algorithm that uses much has defect that occurs an error detection according to a flash of camera, movement of camera and fast movement of an object, because of comparing former frames with present frames. Therefore, we distinguish a scene change one more time using a scene change point detected in the conventional algorithm through comparing its mean value with abutted frames. In the result, we could detect more corrective scene change than the conventional algorithm.

• Journal of information and communication convergence engineering
• /
• v.8 no.1
• /
• pp.51-58
• /
• 2010

This paper proposes an edge adaptive color interpolation for an ultra-small HD-grade complementary metal-oxide semiconductor (CMOS) video sensor in camera phones that can process 720-p/30-fps videos. Recently, proposed methods with great image quality perceptually reconstruct the green component and then estimate the red/blue component using the reconstructed green and neighbor red and blue pixels. However, these methods require the bulky memory line buffers in order to temporally store the reconstructed green components. The edge adaptive color interpolation method uses seven or nine patterns to calculate the six edge directions. At the same time, the threshold values are adaptively adjusted by the sum of the color values of the selected pixels. This method selects the suitable one among the patterns using two flowcharts proposed in this paper, and then interpolates the missing color values. For verification, we calculated the peak-signal-to-noise-ratio (PSNR) in the test images, which were processed by the proposed algorithm, and compared the calculated PSNR of the existing methods. The proposed color interpolation is also fabricated with the 0.18-${\mu}m$ CMOS flash memory process.

• Journal of information and communication convergence engineering
• /
• v.7 no.4
• /
• pp.507-515
• /
• 2009

In this paper, we propose an image signal processor (ISP) for an ultra small HD-grade video sensor with 3A (AWB, AE, and AF) in camera phones that can process 720P/30fps videos. In order to enhance the video quality of the systems, it is necessary to achieve the high performance of the 3A. The proposed AWB algorithm multiplies the adjusted coefficients of color gains to the captured data of white objects. The proposed AE method adopts the index step moving based on the difference between an averaged Y luminance and a target luminance, together with IIR filters with variable time responses. The proposed AF technique controls the focus curve to find the lens position that maximizes the integrated high frequency components in luminance values by using highpass filters. Finally, we compare the image quality captured from our system to the quality of a commercial HD camcorder in order to evaluate the performance of the proposed ISP. The proposed ISP system is also fabricated with 0.18um CMOS flash memory process.

• Journal of ILASS-Korea
• /
• v.13 no.3
• /
• pp.149-155
• /
• 2008

An experimental study was performed to understand spray characteristics of the rotary atomizer for the slinger combustor. In this fuel injection system, fuel is injected and atomized in the combustor by centrifugal forces to engine shaft. The experimental apparatus consists of a high speed rotational spindle, rotary atomizer, pressure tank and acrylic case. The droplet size and velocity were measured by PDPA (phase Doppler particle analyzer), and spray was visualized by using high speed camera and Nd:Yag laser-based flash photography. From the test results, the droplet size (SMD) is largely affected by rotational speed, mass flow rate and the number of orifice. As the experimental results, we could understand the spray characteristics of the rotary atomizer for the slinger combustor and obtain the optimum shape of the rotary atomizer which is suitable for the small gas turbine engine.