• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.477-481
• /
• 2002

Grinding which is the final finishing step in the machining processes plays an important role fur precision manufacturing because it directly affect the product quality. Since the ground surface is affected by the states of grains and voids on the grinding wheel surface, the wheel should be dressed before the machined surface deteriorates over a quality limit. This paper describes a systematic approach to decide a proper dressing chance. A fabricated eddy current sensor and CCD camera are used to measure the loading on the working wheel surface and to visualize the wheel surface states respectively. The dressing chance can be properly decided through the relation between the variation of the thresholding image of the wheel and the machined surface roughness as the variation of the eddy current sensor output is greater than the detected value previously.

• Journal of Institute of Control, Robotics and Systems
• /
• v.15 no.2
• /
• pp.139-147
• /
• 2009

When the visually impaired walks inside a building like corridor, a GPS cannot be useful for the walker in estimating his or her position unlike the case of outdoor space. This paper presents two novel methods to measure the walking distance using a low cost camera worn on the chest of the visually impaired. In the first method we analyze the periodic variation of image focusing values. Walking steps are counted by checking the period for the rough measure of the walking distance. The second method counts the step number by monitoring fixtures on the ceiling, which have a certain interval. Lamps on the ceiling appeared on the video are monitored in this paper. The T-S fuzzy theory is used to detect lamps, and the walking steps are estimated by the positional variation of the lamp due to the gait of the walker. The two methods are tested in real experiment, and the results are compared.

• Journal of Animal Environmental Science
• /
• v.6 no.1
• /
• pp.15-22
• /
• 2000

A monitoring and the forecasting system for the swine delivery was developed using CCD camera multi-function board microphone and data-recorder equipped on a personal computer. For the swine delivery monitoring and forecasting factors four factors were selected such as genitalia swine body shape breast color and sound. Image of physical variation of body shape, shape and color of genitalia area and color of breast of pregnant sow were grabbed using the CCD color camera and multi-function board and variation of voice of pregnant sow was acquired using microphone and data recorder. Acquired information of image and voice were analyzed using a custom developed algorithm and program. The result of the forecasting efficiency of swine delivery was 89%, 71% and 100% using the variation of genitalia are the body shape and the voice of pregnant sow. respectively. The efficiency of image processing was 100% for the delivery detection when the piglet was delivered half of its body from genitalia of pregnant sow, The monitoring and forecasting system informed the estimated time of the delivery of swine to a farm manager immediately if an estimated and established time set by the farm manager was the same and/or the estimated time ws earlier than the established time and the system detected the delivery.

• Journal of the Semiconductor & Display Technology
• /
• v.7 no.4
• /
• pp.23-28
• /
• 2008

A high speed automated pitch variation unit (HAPU) related to semiconductor category sorting movement of the test handler system was developed. In the design process, 'DMADOV' step of 6-Sigma method has been applied. The design result for the desirable pitch variation was a 3:1 reduction rack-pinion and a linkage which are operated by servomotors. The realization and reliability of the mechanism was obtained at the design stage by FEM analysis, and by robust design using Taguchi orthogonal array against weight and deformation. Finally, the validity of the high speed variation mechanism was confirmed via inspection using a high speed camera while performing pitch variation.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.5 no.6
• /
• pp.1166-1191
• /
• 2011

This paper presents an adaptive active tracking system with sector based scanning for a single PTZ camera. Dividing sectors on an image reduces the search space to shorten selection time so that the system can cover many targets. Upon the selection of a target, the system estimates the target trajectory to predict the zooming location with a finite amount of time for camera movement. Advanced estimation techniques using probabilistic reason suffer from the unknown object dynamics and the inaccurate estimation compromises the zooming level to prevent tracking failure. The proposed system uses the simple piecewise estimation with a few frames to cope with fast moving objects and/or slow camera movements. The target is tracked in multiple steps and the zooming time for each step is determined by maximizing the zooming level within the expected variation of object velocity and detection. The number of zooming steps is adaptively determined according to target speed. In addition, the iterative estimation of a zooming location with camera movement time compensates for the target prediction error due to the difference between speeds of a target and a camera. The effectiveness of the proposed method is validated by simulations and real time experiments.

• The Journal of the Society of Korean Medicine Diagnostics
• /
• v.16 no.3
• /
• pp.41-48
• /
• 2012

Objectives: The aims of this study are to design a optimized mechanical structure of digital tongue imaging system (DTIS) equipped with LEDs in aspects of object distance and camera angle of coverage. Methods and Results: We tried to find optimized object distance while recording a rectangular object of common tongue size. In case object distance is 22 cm or less, edge of the rectangle was not taken beyond the shooting range. In contrast, if object distance is 40 cm or more, the rectangle image was too small. Therefore when considering the variation of subjects, we selected distance of 35-40 cm as appropriate object distance for the DTIS. We also tried to find optimized angle between camera view axis and horizontal line. We photographed from the side of the face of 7 adults with exposed tongue. We drew an exposed tongue lines to connect the tongue tip points and the tongue root points by using the photos acquired from the side faces. And then we calculated the tongue exposure angles between the vertical line and the exposed tongue lines. Mean tongue exposure angle was $28.3^{\circ}$ when tongue was lightly exposed and $13.3^{\circ}$ when maximally. So we determined $73^{\circ}$ as appropriate slope angle of part in contact with face of the DTIS and by considering that the standard variation was great, we designed control gears to adjust the slope of the camera view axis and to regulate the object distance. Conclusions: We designed a optimized mechanical structure in object distance and slope angle of part in contact with face of the DTIS.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.2 no.2
• /
• pp.1-13
• /
• 1998

When driven with a short (less than 30$\mu\textrm{s}$) low-energy pulse, the semiconductor bridge(SCB) produces a hot plasma that ignites explosive. The shape of plasma was observed using ultra high speed camera, the generation and the duration time of plasma were estimated by analyzing the ultra high speed camera image. The more energy supplied, the sooner the formation of the plasma was, and the size of the plasma was increased in proportion. The voltage variation of the bridge was measured and analyzed by comparing with the ultra high speed camera image.

• Journal of Environmental Impact Assessment
• /
• v.20 no.3
• /
• pp.349-356
• /
• 2011

This research is aim to analyze of changing landscape and according to phenological cycle from image information of coastal environment obtained by multi-media were analyzed by camera and satellite image. The digital camera and satellite image were used for tidal flat vegetation monitoring during the construction of Sihwa lake. The vegetation type and phenological cycle of Sihwa tidal flat have been changed with the Sihwa lake ecosystem. The environment changes of Sihwa tidal flat area and ecological change were analyzed by field work digital camera images and satellite images. The airborne, UAV and satellite images were classified with the changed elements of coastal ecological environment and tidal flat vegetation monitoring carried out the changed area and shape of vegetation distribution with time series images.

• Korean Journal of Optics and Photonics
• /
• v.19 no.2
• /
• pp.108-115
• /
• 2008

We designed optical systems for a mobile phone camera using a spherical SELFOC lens and an aspherical plastic lens. Since the radial index distribution gives an additional design parameter for optical design, an aspheric lens could be replaced by a spherical lens. The imaging performances of the design were compared with conventional 2P design composed of two aspherical plastic lenses. In the first stage of study, we designed 1GRIN 1P lenses by using commercially available SELFOC materials. But, the conventional 2P lenses had better performance than the 1GRIN 1P lenses. In the 1GRIN 1P designs, the performance depends on index variation of GRIN material, the larger variation gives the better performance. Hence, we tried to design by using fictitious GRIN materials which have large index variation. We found if the index variation could be increased to about 3 times that of currently available SELFOC materials, the 1GRIN 1P lens will have equivalent or better performance than the conventional 2P design.

• Journal of Institute of Control, Robotics and Systems
• /
• v.15 no.3
• /
• pp.265-272
• /
• 2009

In this paper, a simple optical method that uses an infrared(IR) cut filter is proposed to minimize variation of eye image by external infrared(IR) sources in a video based head mounted eye tracking system that is used in the field of sports. For this, the IR cut filter is attached to a head mount of the eye tracking system, and the camera with an IR LED is located between the IR cut filter and eye. In this structure, external IR is blocked by the IR cut filter, and the IR intensity on the eye can be controlled by the IR LED. Therefore, the illumination condition of the camera to capture the eye can be stable without being affected by external IR illuminations. To verify the proposed idea, variation of the eye image and intensity of the IR with/without the IR cut filter is measured under various illumination conditions. The measured data show that the IR cut filter method can block external IR effectively, and complex pupil detection algorithms can be replaced by a simple binarized method.