• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1996.10a
• /
• pp.219-222
• /
• 1996

During the navigation of mobile robot, one of the essential task is to determination the absolute location of mobile robot. In this paper, we proposed a method to determine the position of the camera from a landmark through the visual image of a quadrangle typed landmark using neural network. In determining the position of the camera on the world coordinate, there is difference between real value and calculated value because of uncertainty in pixels, incorrect camera calibration and lens distortion etc. This paper describes the solution of the above problem using BPN(Back Propagation Network). The experimental results show the superiority of the proposed method in comparison to conventional method in the performance of determining camera position.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.21 no.6
• /
• pp.99-104
• /
• 2021

The technology of estimating a movement trajectory using a monocular camera such as a smartphone and composing a surrounding 3D image is key not only in indoor positioning but also in the metaverse service. The most important thing in this technique is to estimate the coordinates of the moving camera center. In this paper, a new algorithm for geometrically estimating the moving distance is proposed. The coordinates of the 3D object point are obtained from the first and second photos, and the movement distance vector is obtained using the matching feature points of the first and third photos. Then, while moving the coordinates of the origin of the third camera, a position where the 3D object point and the feature point of the third picture coincide is obtained. Its possibility and accuracy were verified by applying it to actual continuous image data.

• Journal of Institute of Control, Robotics and Systems
• /
• v.11 no.5
• /
• pp.398-405
• /
• 2005

The intelligent robots that will be needed in the near future are human-friendly robots that are able to coexist with humans and support humans effectively. To realize this, robots need to recognize their position and posture in known environment as well as unknown environment. Moreover, it is necessary for their localization to occur naturally. It is desirable for a robot to estimate of his position by solving uncertainty for mobile robot navigation, as one of the best important problems. In this paper, we describe a method for the localization of a mobile robot using image information of a moving object. This method combines the observed position from dead-reckoning sensors and the estimated position from the images captured by a fixed camera to localize a mobile robot. Using a priori known path of a moving object in the world coordinates and a perspective camera model, we derive the geometric constraint equations which represent the relation between image frame coordinates for a moving object and the estimated robot's position. Also, the control method is proposed to estimate position and direction between the walking human and the mobile robot, and the Kalman filter scheme is used for the estimation of the mobile robot localization. And its performance is verified by the computer simulation and the experiment.

• Journal of the Ergonomics Society of Korea
• /
• v.19 no.1
• /
• pp.77-90
• /
• 2000

The aim of this study is to develop and evaluate an efficient camera calibration method for vision-based head tracking. Tracking head movements is important in the design of an eye-controlled human/computer interface. A vision-based head tracking system was proposed to allow the user's head movements in the design of the eye-controlled human/computer interface. We proposed an efficient camera calibration method to track the 3D position and orientation of the user's head accurately. We also evaluated the performance of the proposed method. The experimental error analysis results showed that the proposed method can provide more accurate and stable pose (i.e. position and orientation) of the camera than the conventional direct linear transformation method which has been used in camera calibration. The results of this study can be applied to the tracking head movements related to the eye-controlled human/computer interface and the virtual reality technology.

• Journal of Multimedia Information System
• /
• v.1 no.1
• /
• pp.1-10
• /
• 2014

In this paper, we propose a new view synthesis technique for coding of multi-view color and depth data in arbitrary camera arrangements. We treat each camera position as a 3-D point in world coordinates and build clusters of those vertices. Color and depth data within a cluster are gathered into one camera position using a hierarchical representation based on the concept of layered depth image (LDI). Since one camera can cover only a limited viewing range, we set multiple reference cameras so that multiple LDIs are generated to cover the whole viewing range. Therefore, we can enhance the visual quality of the reconstructed views from multiple LDIs comparing with that from a single LDI. From experimental results, the proposed scheme shows better coding performance under arbitrary camera configurations in terms of PSNR and subjective visual quality.

• Journal of the Korea Society of Computer and Information
• /
• v.21 no.7
• /
• pp.39-46
• /
• 2016

In this paper, we proposed an application which can conduct to take repetition images for special effect shooting at movies or drama using Bluetooth of smart device. The proposed application can move a camera with motors several times as the same moving after saving of the control data based on the application during specific time using Bluetooth. At the repetition moving, we do not permit to control motors of the camera by person for keeping the same start position and end position after saving the moving data. The camera motors are only moved remotely by saving data of the proposed application. We developed the proposed application and a hardware which works motors with camera to check performance evaluation. Then, we confirmed that the proposed application exactly did the same moving to the motors with camera several times according to saved data. Therefore, because the proposed application can take a same images as control remotely the motors of camera, it will be a useful technology for special effect shooting of movies or dramas.

• Journal of Institute of Control, Robotics and Systems
• /
• v.22 no.11
• /
• pp.952-959
• /
• 2016

This paper proposes a novel indoor positioning system (IPS) that uses a calibrated camera sensor network and dense 3D map information. The proposed IPS information is obtained by generating a bird's-eye image from multiple camera images; thus, our proposed IPS can provide accurate position information when objects (e.g., the mobile robot or pedestrians) are detected from multiple camera views. We evaluate the proposed IPS in a real environment with moving objects in a wireless camera sensor network. The results demonstrate that the proposed IPS can provide accurate position information for moving objects. This can improve the localization performance for mobile robot operation.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.50 no.4
• /
• pp.161-167
• /
• 2001

Camera calibration is very important problem in 3D measurement using vision system. In this paper is proposed the simple method for camera calibration. It is designed that uses the principle of vanishing points and the concept of corresponding points extracted from the parallel line pairs. Conventional methods are necessary for 4 reference points in one frame. But we proposed has need for only 2 reference points to estimate vanishing points. It has to calculate camera parameters, focal length, camera attitude and position. Our experiment shows the validity and the usability from the result that absolute error of attitude and position is in $10^{-2}$.

• Journal of Institute of Control, Robotics and Systems
• /
• v.5 no.3
• /
• pp.344-352
• /
• 1999

There has been requested to automate the welding process in shipyard due to its dependence on skilled operators and the inferior working environments. According to these demands, multiple robot welding system for sub-assembly welding line has been developed, realized and installed at Keoje shipyard. In order to realize automatic welding system, robots have to be equipped with a sensing system to recognize the position of the welding panels. In this research, a camera vision system(CVS) is developed to detect the position of base panels for sub-assembly line in shipbuilding. Two camera vision systems are used in two different stages (fitting and welding) to automate the recognition and positioning of welding lines. For automatic recognition of panel position, various image processing algorithms are proposed in this paper.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1997.11a
• /
• pp.165-170
• /
• 1997

During the navigation of mobile robot, one of the essential task if to determine the absolute position of mobile robot. In this paper, a method to determine the position of the camera using a vanishing point and neural networks without landmark if proposed. In determining the position of the camera on the world coordinate, there are differences between the real value and the calculated value because of uncertainty in pixels, incorrect camera calibration and lens distortion etc. This paper describes the solution of the above problem using BPNN(Back Propagation Neural Network) and experimental results show the capability to adapt for a mobile robot.