• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.2063-2065
• /
• 2003

The control rod drive mechanisms in a reactor head are arranged too narrow for a human worker to approach. Moreover, the working environment is in high radiation area. In order to inspect defections in the surfaces of the reactor head and welding parts, a visual inspection device that can approach such a narrow and high radiation area is required. This paper introduces a tele-operated mobile robot for visual inspection of a reactor head, which has pan/tilt camera, fixed rear camera, ultrasonic collision detection system, and so on. Moreover, the host controller and digital video logging system are developed and integrated control software is also developed. The robot is operated by a wireless control, which gives flexibility for the inspection.

• Publications of The Korean Astronomical Society
• /
• v.10 no.1
• /
• pp.67-78
• /
• 1995

An introduction to the first CCD camera system in Bohyunsan Optica1 Astronomy Observatory(CCD#l) is presented. The CCD camera adopts modular dewar design of IfA(Institute for Astronomy at Hawaii University) and SDSU(San Diego State University) general purpose CCD controller. The user interface is based on IfA design of easy-to-use QUI program running on the NeXT workstation. The characteristics of the CCD#l including Gain, Charge Transfer Efficiency, rms Read-Out Noise, Linearity and Dynamic range is tested and discussed. The CCD#l shows 6.4 electrons RON and gain of 3.49 electrons per ADU, and the optimization resulted in about 27 seconds readout time guaranteeing charge transfer efficiency of 0.99999 for both direction. Linearity test shows that non-linear coefficient is $6{\times}10^{-7}$ in the range of 0 to 30,000 ADU.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.05a
• /
• pp.338-341
• /
• 2005

This paper proposes a control system for a Galvano meter which can be used in angle multiplexing for a holographic data storage. Due to the small angle multiplexing selectivity and the exposure/delay time of a CCD camera, the system needs to be controlled to satisfy the performance specification. First, the mathematical model is derived by combining the electrical and mechanical dynamic equations. Then, the obtained model was tuned by the experiments. Finally, a PID controller using DSP was designed and was applied the holographic system. From this approach, we successfully meet the performance specification.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.11a
• /
• pp.743-748
• /
• 2008

This paper presents an inertia type of piezostack based active mount for unmanned aero vehicle (UAV) camera system. After identifying the stiffness and damping properties of the rubber element and piezostack a mechanical model of the active mount system is established. The governing equation of mount is them derived and expressed in a state space farm. Subsequently, a sliding mode controller which is robust to uncertain parameters is designed in order to reduce the vibration imposed according to the military specification associated with UAV camera mount system operation. Control performances such as acceleration and transmitted force are evaluated through both computer simulation and experimental implementation.

• Journal of Astronomy and Space Sciences
• /
• v.12 no.1
• /
• pp.54-65
• /
• 1995

We present a design study for a remote sensing camera system which can be operated in multi-channel mode simultaneously with several bandpass filters. The camera control electronics is based on the multiplexed driving concept, which can provide a variety of flexibility for system control parameters and its individual optimisation. The design can also be applied to any system with linear sensors or frame sensors according to its functional requirements. The system design parameters have been examined, including modification of driving waveforms for different types of sensors, waveforms for low-nosie readout circuit in analog chain, and synchronisation with other signal processing.

• Proceedings of the KIEE Conference
• /
• 2005.07a
• /
• pp.905-907
• /
• 2005

In this paper, we propose the system that can monitor and control the camera in the remote place using the PDA. The server PC attached to the PLC (Programmable Logic Controller) acquires the current status (On/Off) of the devices through the RS-232 serial communications. Also, the moving image frames captured from the wireless camera is compressed in the JPEG format and is stored in the server. The PDA, which is connected to the server through wireless internet, receives the data about the status of the devices and controls the devices according to the circumstances of them. Also, it can receive the images from the server simultaneously. So, we ran monitor and control the specified area in the remote place using the PDA through the wireless communication.

• Proceedings of the KIEE Conference
• /
• 2005.07d
• /
• pp.3117-3119
• /
• 2005

In this paper, we propose the system that can monitor and control the camera in the remote place using the PDA. The server PC attached to the PLC (Programmable Logic Controller) acquires the current status (On/Off) of the devices through the RS-232 serial communications. Also, the moving image frames captured from the wireless camera is compressed in the JPEG format and is stored in the server. The PDA, which is connected to the server through wireless internet, receives the data about the status of the devices and controls the devices according to the circumstances of them. Also, it can receive the images from the server simultaneously. So, we can monitor and control the specified area in the remote place using the PDA through the wireless communication.

• Proceedings of the KIEE Conference
• /
• 2005.05a
• /
• pp.33-35
• /
• 2005

We propose an eye gaze tracking system under natural head movements. The system consists of one CCD camera and two front-surface mirrors. The mirrors rotate to follow head movements in order to keep the eye within the view of the camera. However, the mirror controller cannot guarantee the fast head movements, because the frame rate is generally 30Hz. To overcome this problem, we applied Kalman predictor to estimate next eye position from the current eye image. In the results, our system allows the subjects head to move 50cm horizontally and 40cm vertically, with the speed about 10cm/sec and 6cm/sec, respectively. And spatial gaze resolutions are about 4.5 degree and 4.5 degree, respectively, and the gaze estimation accuracy is 92% under natural head movements.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.486-491
• /
• 2005

There come various types of robot with researches for mobile robot. This paper introduces the multi-joint snake robot having 16 degree of freedom and composing of eight-axis. The biological snake robot uses the forward movement friction and the proposed artificial snake robot uses the un-powered wheel instead of the body of snake. To determine the enable joint angle of each joint, the controller inputs are considered such as color and distance using PC Camera and ultra-sonic sensor module, respectively. The movement method of snake robot is sequential moving from head to tail through body. The target for movement direction is decided by a certain article be displayed in the PC Camera. In moving toward that target, if there is any obstacle then the snake robot can avoid by itself. In this paper, we show the method of snake robot for tracing the target with experiment.

• Proceedings of the IEEK Conference
• /
• 2009.05a
• /
• pp.360-362
• /
• 2009

In this paper, we studied for the real-time azimuthal measurement of HMD(Head Mounted Display) using the feature points detection to control the tele-operated vision system on the mobile robot. To give the sense of presence to the tele-operator, we used a HMD to display the remote scene, measured the rotation angle of the HMD on a real time basis, and transmitted the measured rotation angles to the mobile robot controller to synchronize the pan-tilt angles of remote camera with the HMD. In this paper, we suggest an algorithm for the real-time estimation of the HMD rotation angles using feature points extraction from pc-camera image.