• 한국화재소방학회:학술대회논문집
• /
• 한국화재소방학회 2005년도 춘계학술논문발표회 논문집
• /
• pp.219-225
• /
• 2005

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 2004년도 추계학술발표회 발표논문집
• /
• pp.845-846
• /
• 2004

• 한국통신학회:학술대회논문집
• /
• 한국통신학회 2004년도 추계종합학술대회 논문 초록집
• /
• pp.152-152
• /
• 2004

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 2005년도 추계학술발표회
• /
• pp.496-497
• /
• 2005

• 한국기후변화학회지
• /
• 제8권4호
• /
• pp.347-355
• /
• 2017

Methane and nitrous oxide are main greenhouse gases from agricultural system and their global warming potential are 25 and 258 times stronger than that of $CO_2$, respectively. In 2016, the emission was $21,290Gg\;tone\;CO_2-eq$. which was emitted from agriculture sector and about 3.1% of total GHG emission of Korea. Those guidelines that were published by IPCC have methodology for GHGs emission calculation as well as emission factor and so on. For recent 5 years, GHGs emissions in Korea have calculated by MRV which has been improved every year based on IPCC guidelines. Analysis as estimating method improvement showed that the methane emissions from rice cultivation were the lowest on 2012 methodology, and the highest on 2014 methodology. On the other hand, the emissions of agricultural soils were the lowest on 2015 methodology and the highest on 2012 methodology. Total emissions from agriculture sector were the lowest on 2015 methodology and the highest on 2012 methodology. Compared with 2016 methodology, the GHGs emitted as few as $-1,865Gg\;tone\;CO_2-eq$ and as many as $2,717Gg\;tone\;CO_2-eq$. GHGs emissions can vary greatly, depending on how to use the emission factor and activity data. Therefore, it need constantly a detailed analysis for methodology and GHGs emission in the future.

• 한국CDE학회논문집
• /
• 제7권1호
• /
• pp.27-33
• /
• 2002

MDO(Multidisciplinary Design Optimization) methodology is a new technology to solve a complicate design problem with a large number of design variables and constraints. The design of a dental implant system is a typical complicate problem, and so it requires the MDO methodology. Actually, several analyses such as rigid body dynamic analysis and structural stress analysis etc. should be carried out in the MDO methodology application to the design of a dental implant system. In this paper, as a first step of MDO methodology application to the design of a dental implant system, the impact force which is applied on the tooth in masticating is calculated through the rigid body dynamic analysis of upper and lower jaw-bones. This analysis is done using ADAMS. The impact force calculated through the rigid body dynamic analysis can be used for the structural stress analysis of a dental implant system which is needed for the design of a dental implant system. In addition, the rigid body dynamic analysis results also show that the impact time decreases as the impact force increases, the largest impact force occurs on the front tooth, and the impact force is almost normal to the tooth surface with a slight tangential force.

• Nuclear Engineering and Technology
• /
• 제51권2호
• /
• pp.384-393
• /
• 2019

An experimental validation of a nuclear forensics methodology for the source reactor-type discrimination of separated weapons-useable plutonium is presented. The methodology uses measured values of intra-element isotope ratios of plutonium and fission product contaminants. MCNP radiation transport codes were used for various reactor core modeling and fuel burnup simulations. A reactor-dependent library of intra-element isotope ratio values as a function of burnup and time since irradiation was created from the simulation results. The experimental validation of the methodology was achieved by performing two low-burnup experimental irradiations, resulting in distinct fuel samples containing sub-milligram quantities of weapons-useable plutonium. The irradiated samples were subjected to gamma and mass spectrometry to measure several intra-element isotope ratios. For each reactor in the library, a maximum likelihood calculation was utilized to compare the measured and simulated intra-element isotope ratio values, producing a likelihood value which is proportional to the probability of observing the measured ratio values, given a particular reactor in the library. The measured intra-element isotope ratio values of both irradiated samples and its comparison with the simulation predictions using maximum likelihood analyses are presented. The analyses validate the nuclear forensics methodology developed.

• Journal of Electrical Engineering and Technology
• /
• 제12권1호
• /
• pp.478-485
• /
• 2017

Urban DC railways have played an important role in urban transportation, and railway operation and energy management have been emphasized to be important to achieve maximum efficiency from existing infrastructure. Fast, accurate DC railway power flow analysis is required to operate a DC railway efficiently, and this paper proposes a novel methodology to analyze the DC railway power network by implementing the participation factor (PF). The PF concept consists of a correlation between the vehicle and the substation, as explained using zones based on the position of the vehicles running on the route. Then, the DC railway powerflow is calculated using the PF concept. Finally, the usability of the proposed method was validated via case studies with actual railway operation data, and we discuss some of the advantages of the suggested methodology.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제55권12호
• /
• pp.596-607
• /
• 2006

This paper presents Single Phase Switched Reluctance Motor (SPSRM) optimum design for vacuum cleaners using Response Surface Methodology (RSM) to determine geometric parameters, and the 2-D Finite Element Method (FEM) has been coupled with the circuit equations of the driving converter. Additionally, an optimum process for SPSRM has been proposed and peformed with geometric and electric parameters thereby influencing the inductance variation and effective torque generation as design variables. SPSRM performances have also been analyzed to determine an optimal design model for maximized efficiency at high power factor. In order to confirm the propriety of the Finite Element Method and motor performance calculation, simulation waveform and experiment waveform for motor voltage and current were compared.

• 한국건설관리학회:학술대회논문집
• /
• 한국건설관리학회 2001년도 학술대회지
• /
• pp.65-72
• /
• 2001

최근 들어 건설환경이 더욱 복잡해지고 경쟁이 치열해짐에 따라 위험관리의 중요성이 더욱 부각되고 있다. 그러나 건설공사에 적용되는 대부분의 위험관리 기법들이 사업초기단계에서 위험분석에 집중되어 있어, 건설과정에서 공정관리, 원가관리 또는 품질관리처럼 일상적인 관리기법으로 개발되어 있지 않다. 본 논문에서는 건설공사에서 위험관리를 일상적인 관리기법으로 적용하기 위하여 위험허용도 중심의 위험대응 프로세스를 제안하고, VaR개념을 응용한 위험허용도 산정방법을 제시하고자 한다.