• 접착 및 계면
• /
• 제9권2호
• /
• pp.24-31
• /
• 2008

본 연구에서는 EVA 에멀젼에 내수성 및 기계적 특성을 향상시키기 위하여 금속 이온 가교제인 calcium hydroxide 및 magnesium carbonate를 사용하여 이온성 가교결합을 도입하였다. EVA 에멀젼 필름의 가교밀도, 열적특성, 표면자유에너지 그리고 인장강도, 파단신율 및 인열강도 특성을 고찰하였다. 금속 이온 가교제 양이 증가함에 따라 EVA 에멀젼의 가교밀도는 증가하였고, 이에 내수성과 $T_g$ 값도 증가하였다. 그러나 EVA 에멀젼 필름의 표면에너지 및 기계적 특성들은 다소 다른 거동을 보였다. Calcium hydroxide 0.4% 그리고 magnesium carbonate 0.5%를 첨가한 경우가 EVA 에멀젼에 강한 이온성 가교결합이 형성되어 가장 높은 표면 자유에너지 값과 인장강도 및 인열강도를 보였다. 그러므로 본 연구에서 calcium hydroxide 및 magnesium carbonate와 같은 금속 이온 가교제가 EVA 에멀젼의 내수성과 기계적 물성을 향상시킴을 확인하였다.

• Restorative Dentistry and Endodontics
• /
• 제48권3호
• /
• pp.25.1-25.13
• /
• 2023

Objectives: The purpose of this study was to evaluate the influence of endodontic access cavities design on the removal of calcium hydroxide medication of the apical third of mandibular incisor root canal walls and dentinal tubules with different cleaning protocols: EDDY sonic activation, Er,Cr:YSGG laser-activated irrigation, or conventional irrigation with IrriFlex. Materials and Methods: Seventy-eight extracted human mandibular incisors were assigned to 6 experimental groups (n = 13) according to the endodontic access cavity and cleaning protocol for calcium hydroxide removal: traditional access cavity (TradAC)/EDDY; ultraconservative access cavity performed in the incisal edge (UltraAC.Inc)/EDDY; TradAC/Er,Cr:YSGG; UltraAC. Inc/Er,Cr:YSGG; TradAC/IrriFlex; or UltraAC.Inc/IrriFlex. Confocal laser scanning microscopy images were used to measure the non-penetration percentage, maximum residual calcium hydroxide penetration depth, and penetration area at 2 and 4 mm from the apex. Data were statistically analyzed using Shapiro-Wilk and WRS2 package for 2-way comparison of non-normally distributed parameters (depth of penetration, area of penetration, and percentage of non-penetration) according to cavity and cleaning protocol with the significance level set at 5%. Results: The effect of cavity and cleaning protocol interactions on penetration depth, penetration area and non-penetration percentage was not found statistically significant at 2 and 4 mm levels (p > 0.05). Conclusions: The present study demonstrated that TradAC or UltraAC.Inc preparations with different cleaning protocols in extracted mandibular incisors did not influence the remaining calcium hydroxide at 2 and 4 mm from the apex.

• 한국토양비료학회지
• /
• 제40권4호
• /
• pp.269-273
• /
• 2007

최근 악취발생으로 의한 사회적 관심 증가, 피해사례 증가에 대해 과학적 저감 기술이 요구되나 확실한 악취저감 기술의 미흡과 악취저감용 처리제의 기초평가자료가 부족한 실정이다. 본 연구는 부산물 퇴비에서 발생되는 악취물질인 $NH_3$를 저감하기 위한 처리제 선발 및 평가에 목적을 두어 수행되었으며 본 연구 결과를 요약하면 다음과 같다. 부숙화 과정에서 calcium hydroxide, activated carbon, zerovalent iron (ZVI)처리에서 60 이상으로 온도 상승을 보여 부숙진행이 원할히 이루어졌음을 알 수 있었다. calcium hydroxide, activated carbon, ZVI에서 pH 변화는 퇴비화가 진행됨에 따라 상승하여 후부숙 단계에서는 pH 8.6 - pH 8.8을 보였다. 또한 부숙화 과정 14일 동안 calcium hydroxide 처리구의 EC는 $2.15dS\;m^{-1}$에서 $0.66dS\;m^{-1}$으로, carbon $1.48dS\;m^{-1}$에서 $1.11dS\;m^{-1}$, ZVI $1.77dS\;m^{-1}$에서 $0.68dS\;m^{-1}$으로 EC값이 큰 폭으로 줄어드는 것을 확인할 수 있었다. EC값이 1일차에서의 각각의 처리제별로 약간의 차이를 보이는 것은 퇴비 자체가 불규칙적인 상태의 고체이기 때문이라고 사료되며 측정치가 약 $0.5dS\;m^{-1}$ - $0.7dS\;m^{-1}$ 의 차이를 보였다. 인도페놀법을 이용한 $NH_3$ 측정 결과에 따르면 activated carbon의 경우 초기 8.8ppm에서 30일 후 0.1ppm으로 생분 + 톱밥의 9.3ppm보다 약 93배가량 저감하는 것으로 나타났다. Calcium hydroxide의 경우는 30일 후 0.7ppm으로 약 13배 정도 저감하였으며 ZVI의 경우는 30일 후 1.7ppm으로 약 5배 정도 저감하였다. 위 결과들을 종합해본 결과, 부산물퇴비에서 발생되는 $NH_3$를 저감하기 위한 처리제로서 calcium hydroxide, activated carbon, zero valent Iron (ZVI)를 활용할 수 있을 것이라고 사료 되나 향후 처리제의 독립적 사용가능성, 복합적 사용가능성 등에 대한 연구가 추가적으로 수행되어야 할 것이라고 판단된다.

• Restorative Dentistry and Endodontics
• /
• 제21권1호
• /
• pp.187-201
• /
• 1996

The purpose of this study was to evaluate the sealing ability of a calcium hydroxide plug treated with a bonding agent. Ninety extracted human anterior teeth and premolars with single canal were used in this study. Crowns were removed. the canal's were instrumented. and the roots were randomly divided into three groups of 30 each. In control group. a single apical seat was prepared with #60 K file 1mm short of the apex and the root canal was obturated with Gutta-percha and Sealapex by the lateral condensation method. In experimental group 1 and group 2. to prepare an apical isthmus of 1mm in length. the first apical seat was prepared with a #45 K file 1mm short of the anatomical apex and with a #60 K file 2mm short for the second apical seat. Dry calcium hydroxide powders were packed in the apical isthmus with a hand plugger and #60 K file and then. the root canal was obturated with Gutta-percha and Seal apex by the lateral condensation method. In experimental group 2. following an application of the bonding agent to the plug. the root canal was obturated in the same way. The teeth of each group were immersed in a 2% methylene blue dye solution. for 1, 2, and 4 weeks. The distance from the tip of the cone to the deepest penetration was measured using the Tool maker's microscope. The results were as follows : 1. The teeth having the calcium hydroxide plug treated with the dentin bonding agent (experimental group 2) showed the lowest leakage with 1.4705mm and the control group without apical plug(no apical isthmus) showed the highest leakage with 3.1735mm. 2. The control group without apical plug showed higher leakage than experimental group 1 having the calcium hydroxide plug treated without the dentin bonding agent(p>0.05). 3. The control group without apical plug and experimental group 1, having the calcium hydroxide plug treated without the dentin bonding agent. showed higher leakage than experimental group 2. having the calcium hydroxide plug treated with the dentin bonding agent(p<0.001). 4. The immersion time had no significant effect on the degree of leakage. In conclusion, the results showed that the calcium hydroxide plug treated with the dentin bonding agent could decrease the microleakage from the root apex effectively.

• Restorative Dentistry and Endodontics
• /
• 제21권2호
• /
• pp.451-469
• /
• 1996

The purpose of this study was to investigate the effect of calcium hydroxide and glass ionomer cement fillings on the levels of $LTB_4$ and $LTC_4$ in experimentally inflamed rat dental pulp. The dental pulp in the mandibular incisor of wistar rat was irritated by cutting a 5mm deep hole in the dentin with a twist drill bur of 0.5mm diameter, without cooling. The cavities were filled with calcium hydroxide(light-cured) and glass ionomer cement(light cured). The untreated pulp served as control tissue specimen. After cavity preparations, the rat with or without various treatment were sacrificed in various time by decapitation. The dental pulp tissue were carefully removed and the concentrations of $LTB_4$ and $LTC_4$ were determined by radioimmunoassay. And pulps were examined histologically to observe inflammatory feature. The result were obtained as follows : 1. The inflammatory features of pulps were observed microscopically in all experimental groups. And degree of inflammation was decreased with time. 2. The concentrations of $LTB_4$ and $LTC_4$ for all experimental groups were significantly higher than those for control group 6 hours after cavity preparation(p<0.05). 3. The group filled with calcium hydroxide was the lowest, and the group filled with glass ionomer cement, the group of irritation in that order showed increased concentrations of $LTB_4$ and $LTC_4$ 6 hours after cavity preparation. In the concentrations of $LTB_4$, significant differences among 3 groups were noted(p<0.05). 4. The group filled with calcium hydroxide was the lowest, and the group filled with glass ionomer cement, the group of irritation in that order showed increased concentrations of $LTB_4$ and $LTC_4$ 24 hours after cavity preparation. And there were statistically significant difference in concentrations of $LTB_4$ between the group of irritation and the group filled with calcium hydroxide(p<0.05). 5. The group filled with calcium hydroxide was the lowest, and the group filled with glass ionomer cement, the group of irritation in that order showed increased concentrations of $LTB_4$ and $LTC_4$ 48 hours after cavity preparation. But no statistically difference was found (p>0.05). 6. The concentrations of $LTB_4$ and $LTC_4$ in all experimental groups were highest level at 6 hour after experiment and decreased as time progresses(correlation coefficient>0.8).

• 원예과학기술지
• /
• 제28권6호
• /
• pp.1072-1077
• /
• 2010

본 실험은 7가지의 칼슘제제; calcium sulfate dihydrate, calcium chloride, calcium nitrate, calcium oxide, calcium hydroxide, calcium carbonate, calcium hydride가 포함된 PDA배지에서 잿빛곰팡이 균의 방제효과를 알고자 실시되었다. 선발된 칼슘제제의 pH는 8.2-10으로 대조구인 pH 6.6보다는 높게 측정되었다. 7가지 칼슘제제가 포함된 PDA배지에서의 잿빛곰팡이병 방제 colony size(mm) 결과는 calcium carbonate, calcium oxide, calcium hydride, calcium hydroxide가 다른 칼슘제제들 보다 잿빛곰팡이병 억제에 효과가 좋았다. 선택된 4개의 칼슘제제를 식물체에 처리 한 후 잿빛곰팡이병의 포자를 살포한 실험과 희석된 4개의 칼슘제제)를 표준 양액재배에 첨부하여 한 달간 양액을 공급한 후 잿빛곰팡이병의 포자를 접종한 실험결과는 칼슘제제를 처리하지 않은 대조구보다는 칼슘제제를 처리한 실험구에서 잿빛곰팡이병의 발생률이 대체적으로 낮았다. 칼슘제제를 처리한 파프리카 식물체에서 잿빛곰팡이병 억제에 대하여서는 칼슘제제 처리에 따른 어느 정도의 염기스트레스의 영향 등으로 볼 수가 있겠다.

• 한국세라믹학회지
• /
• 제28권11호
• /
• pp.885-891
• /
• 1991

Calcium hydroxyapatite have been synthesized by a direct precipitation reaction between 0.05 M calcium hydroxide suspension and 0.3 M orthophosphoric acid solution. 0.01 M calcium hydroxide solution was added during the reaction in order to increase the total Ca/P mol ration and reaction pH of the solution. The stoichiometric hydroxyapatite was synthesized over 1.75 as total Ca/P mol ratio, but the calcium-deficient hydroxyapatite was prepared under 1.725 as total Ca/P mol ratio. The nonstoichiometry of the precipitates were interpreted in terms of the pH change during the reaction.

• 한국항해항만학회지
• /
• 제39권6호
• /
• pp.523-528
• /
• 2015

본 연구에서는 붕소함유 인공염수(간수)를 수산화칼슘으로 포화시켜 calcium borate를 합성하는 반응에서, 첨가하는 황산이 미치는 영향을 알아보았다. 다양한 조건(반응온도, 반응시간, 가열반응 후 방랭온도)에서 calcium borate 합성을 시도하였고, 각 조건에서 황산 첨가유무에 따른 calcium borate의 회수율과 순도 변화를 알아보았다. XRD 분석을 통해 황산의 첨가유무에 상관없이 calcium borate($Ca_2B_2O_5{\cdot}H_2O$)가 생성되었음을 확인하였고, 황산을 첨가하면 부산물로 황산칼슘(($CaSO_4{\cdot}0.5H_2O$) 이 생성되었다. 황산을 첨가하지 않았을 때, 실험한 모든 반응온도와 반응시간 조건에서 calcium borate의 회수율과 순도가 황산을 첨가했을 때보다 더 높았다. 황산을 첨가하면 수산화칼슘의 용해도는 높아지지만, 부산물로 생성되는 황산칼슘이 calcium borate의 생성을 방해하여 그 회수율과 순도가 낮아진다고 판단된다. 본 연구에서는 붕소함유(500 mg-B/L) 인공염수(간수)에 황산을 첨가하지 않고 수산화칼슘으로 포화시켜서 $80-105^{\circ}C$에서 10분 이내로 가열하여 calcium borate를 합성하였고, 그 회수율과 순도는 각각 최대 80 %, 96 %로 매우 높았다.

• Restorative Dentistry and Endodontics
• /
• 제20권2호
• /
• pp.399-422
• /
• 1995

The purpose of this study was to investigate a fragment of possibility of pulpotomy with the Nd-YAG laser by the observation of pulpal healing process and the fine structural changes of the fibroblasts of the remaining pulpal tissues. Class V cavities on !55 teeth from 4 adult dogs were prepared and the pulp chambers were opened with a sterilized round bur. In the control group(19 teeth), the exposed coronal pulps were excised by a sharp excarvator. After bleeding was controlled with the sterilized cotton pellets, calcium hydroxide powder was applied on the remaining pulpal tissues and the cavities were sealed with Z.O.E. In the experimental group 1 : the pulpotomy with laser-calcium hydroxide powder application group(l9 teeth), the exposed coronal pulps were excised by Nd-YAG laser(10 watts power, 2 psi water, 20 psi air) for 2 or 3 seconds and calcium hydroxide powder was applied on the remaining pulpal tissues and the cavities were sealed with Z.O.E. In the experimental group 2 : the pulpotomy with laser-no calcium hydroxide powder application group(17 teeth), after amputating the coronal pulps with Nd-YAG laser as the experimental group 1, the remaining pulpal tissues were covered with stenilized aluminum foil and the cavities were filled with Z.O.E. The animals were sacrificed at the intervals of 1, 2, 3 and 4 weeks. All the teeth were rouutinely processed and the remaining pulpal tissues were observed by the light microscope and electron microscope. The results were as follows : 1. In light microscopic findings, there was no significant difference of the inflammatory response in the remaining pulpal tissues between the control group and the experimental groups. In both of the experimental group 1 : pulpotomy with laser-calcium hydroxide powder application group and the control group, the dentin bridges were observed after 2 weeks and the structure of the dentin bridge was almost same. In the experimental group 2 : pulpotomy with laser-no calcium hydroxide powder application group, the fibrous layers instead of dentin bridge were observed on the superficial portion of the remaining pulpal tissues after 2 weeks and they were consisted with densely crowded active fibroblasts. 2. In the electronmicroscopic findings, the active fibroblasts in the experimental groups were more frequently observed than in the control group at 1 week. But active fibroblasts were found with same frequency after 2 weeks in all of the control group and the experimental groups. 3. General distortions of the cell such as loss of the cell membrane, vaculoization of the cell etc. were observed at the suberficial layer of the remaining pulpal tissues and the carbonization was found in the dentinal wall in 1 week of the experimental groups. 4. In the experimental group 2 : pulpotomy with laser-no calcium hydroxide powder application group, the activity and the density of the fibroblasts in the fibrous layer were more than those in the deep portion of the remaining pulpal tissues after 2 weeks. 5. In the control group, bacteria such as cocci and bacilli were observed frequently, but in the experimntal groups, they could not be observed.

• Environmental Sciences Bulletin of The Korean Environmental Sciences Society
• /
• 제10권S_2호
• /
• pp.89-95
• /
• 2001

The solidification and leaching characteristics of cyclone ash collected from an industrial incineration plant were investigated. Cement and calcium hydroxide were used as the solidifying materials. The leaching characteristics of the solidified cyclone ash were found to vary depending on both the quantitative and the qualitative aspects of the solidifying materials. Except for copper and lead, all the heavy metal ions in the leachate of the solidified material composed of 10~20 % cement or 10~20 % calcium hydroxide were found to be within their standard limit. Moreover, all the heavy metal ions were also observed to be within satisfactory limits in the leachate obtained from the solidified material composed of 30 % cement or 30 % calcium hydroxide. Therefore, to satisfy the standard compressive intensity and permissible limits of heavy metal ions leached from solidified material, it would appear that a 30 % proportion of either additive in the solidification product can meet the required standard for the leachate. The cost of solidifying cyclone ash per ton for ash-30 % cement and ash-30 % lime was calculated as 26,750 and 26,070 won, respectively. Accordingly, significant reduction in the waste toxicity and mobility as well as an improvement in the engineering properties of the solidified products were successfully achieved.