• Journal of Adhesion and Interface
• /
• v.9 no.2
• /
• pp.24-31
• /
• 2008

In this work, calcium hydroxide and magnesium carbonate as metal ionic crosslinking agents were used to introduce ionic crosslinking points to the ethylene vinylacetate (EVA) emulsions for the enhancement of water resistance and mechanical properties of emulsion films. The properties of EVA emulsion film were investigated in crosslinking density, thermal features, surface energy, and mechanical properties, such as tensile strength, elongation at break and tear strength. With the increasing content of metal ionic crosslinking agent, the crosslinking density of the EVA emulsion film increases, resulting into the improvement of water resistance. The surface energy and mechanical properties of the EVA emulsion film, however, showed somewhat different behaviors. The highest surface energy, tensile strength, and tear strength were observed when 0.4% for calcium hydroxide and 0.5% for magnesium carbonate was added respectively, because the EVA emulsion containing carboxylic acid forms strong carboxylate-metal bond of ionically-crosslinked system. Therefore, it can be concluded that metal ionic crosslinking agents, such as magnesium carbonate and calcium hydroxide are considered to improve water resistance and mechanical properties of the EVA emulsion.

• Restorative Dentistry and Endodontics
• /
• v.48 no.3
• /
• pp.25.1-25.13
• /
• 2023

Objectives: The purpose of this study was to evaluate the influence of endodontic access cavities design on the removal of calcium hydroxide medication of the apical third of mandibular incisor root canal walls and dentinal tubules with different cleaning protocols: EDDY sonic activation, Er,Cr:YSGG laser-activated irrigation, or conventional irrigation with IrriFlex. Materials and Methods: Seventy-eight extracted human mandibular incisors were assigned to 6 experimental groups (n = 13) according to the endodontic access cavity and cleaning protocol for calcium hydroxide removal: traditional access cavity (TradAC)/EDDY; ultraconservative access cavity performed in the incisal edge (UltraAC.Inc)/EDDY; TradAC/Er,Cr:YSGG; UltraAC. Inc/Er,Cr:YSGG; TradAC/IrriFlex; or UltraAC.Inc/IrriFlex. Confocal laser scanning microscopy images were used to measure the non-penetration percentage, maximum residual calcium hydroxide penetration depth, and penetration area at 2 and 4 mm from the apex. Data were statistically analyzed using Shapiro-Wilk and WRS2 package for 2-way comparison of non-normally distributed parameters (depth of penetration, area of penetration, and percentage of non-penetration) according to cavity and cleaning protocol with the significance level set at 5%. Results: The effect of cavity and cleaning protocol interactions on penetration depth, penetration area and non-penetration percentage was not found statistically significant at 2 and 4 mm levels (p > 0.05). Conclusions: The present study demonstrated that TradAC or UltraAC.Inc preparations with different cleaning protocols in extracted mandibular incisors did not influence the remaining calcium hydroxide at 2 and 4 mm from the apex.

• Korean Journal of Soil Science and Fertilizer
• /
• v.40 no.4
• /
• pp.269-273
• /
• 2007

Occurrence of malodor could cause adverse impacts on human health and increase public interest. Therefore, scientific methods to decrease odor is required. Endeavor to decrease odor from compost however has not fully been successful. The purpose of this research is assessment of some amendments to reduce $NH_3$ from immature composts. Calcium hydroxide was applied to composts due to it's characteristics to increase pH. Activated carbon and zerovalent iron (ZVI) were selected because of their adsorption properties. The research results were as follows: Calcium hydroxide, activated carbon, zerovalent iron increased the composting temperature above $60^{\circ}C$. The addition of calcium hydroxide, activated carbon, and ZVI to compastry process increased pH 8.6 - 8.8 from $1^{st}$ day to $14^{th}$ day. During the 14 days of composting, addition of calcium hydroxide, activated carbon and ZVI changed EC from $2.15-0.66dS\;m^{-1}$, $1.48-1.11dS\;m^{-1}$, respectively and $1.77-0.68dS\;m^{-1}$. The difference in EC of the compost was due to irregularities of samples. Organic matter in the compost decreased through out theexcept control. The $NH_4-N/NO_3-N$ ratio of all experimental compost increased through the process. The addition of activated carbon, calcium hydroxide and ZVI decreased $NH_3$ from 0.1ppm, 0.7ppm and 1.7ppm more than the control (pig manure and sawdust), 9.3ppm, in 30 days of composting. In conclusion, odor from prematured compost decreased by addition of chemicals like calcium hydroxide, activated carbon, zerovalent iron. Moreover, use of these $NH_3$ reducers alone or together combined at different periods of composting etc. could decrease $NH_3$.

• Restorative Dentistry and Endodontics
• /
• v.21 no.1
• /
• pp.187-201
• /
• 1996

The purpose of this study was to evaluate the sealing ability of a calcium hydroxide plug treated with a bonding agent. Ninety extracted human anterior teeth and premolars with single canal were used in this study. Crowns were removed. the canal's were instrumented. and the roots were randomly divided into three groups of 30 each. In control group. a single apical seat was prepared with #60 K file 1mm short of the apex and the root canal was obturated with Gutta-percha and Sealapex by the lateral condensation method. In experimental group 1 and group 2. to prepare an apical isthmus of 1mm in length. the first apical seat was prepared with a #45 K file 1mm short of the anatomical apex and with a #60 K file 2mm short for the second apical seat. Dry calcium hydroxide powders were packed in the apical isthmus with a hand plugger and #60 K file and then. the root canal was obturated with Gutta-percha and Seal apex by the lateral condensation method. In experimental group 2. following an application of the bonding agent to the plug. the root canal was obturated in the same way. The teeth of each group were immersed in a 2% methylene blue dye solution. for 1, 2, and 4 weeks. The distance from the tip of the cone to the deepest penetration was measured using the Tool maker's microscope. The results were as follows : 1. The teeth having the calcium hydroxide plug treated with the dentin bonding agent (experimental group 2) showed the lowest leakage with 1.4705mm and the control group without apical plug(no apical isthmus) showed the highest leakage with 3.1735mm. 2. The control group without apical plug showed higher leakage than experimental group 1 having the calcium hydroxide plug treated without the dentin bonding agent(p>0.05). 3. The control group without apical plug and experimental group 1, having the calcium hydroxide plug treated without the dentin bonding agent. showed higher leakage than experimental group 2. having the calcium hydroxide plug treated with the dentin bonding agent(p<0.001). 4. The immersion time had no significant effect on the degree of leakage. In conclusion, the results showed that the calcium hydroxide plug treated with the dentin bonding agent could decrease the microleakage from the root apex effectively.

• Restorative Dentistry and Endodontics
• /
• v.21 no.2
• /
• pp.451-469
• /
• 1996

The purpose of this study was to investigate the effect of calcium hydroxide and glass ionomer cement fillings on the levels of $LTB_4$ and $LTC_4$ in experimentally inflamed rat dental pulp. The dental pulp in the mandibular incisor of wistar rat was irritated by cutting a 5mm deep hole in the dentin with a twist drill bur of 0.5mm diameter, without cooling. The cavities were filled with calcium hydroxide(light-cured) and glass ionomer cement(light cured). The untreated pulp served as control tissue specimen. After cavity preparations, the rat with or without various treatment were sacrificed in various time by decapitation. The dental pulp tissue were carefully removed and the concentrations of $LTB_4$ and $LTC_4$ were determined by radioimmunoassay. And pulps were examined histologically to observe inflammatory feature. The result were obtained as follows : 1. The inflammatory features of pulps were observed microscopically in all experimental groups. And degree of inflammation was decreased with time. 2. The concentrations of $LTB_4$ and $LTC_4$ for all experimental groups were significantly higher than those for control group 6 hours after cavity preparation(p<0.05). 3. The group filled with calcium hydroxide was the lowest, and the group filled with glass ionomer cement, the group of irritation in that order showed increased concentrations of $LTB_4$ and $LTC_4$ 6 hours after cavity preparation. In the concentrations of $LTB_4$, significant differences among 3 groups were noted(p<0.05). 4. The group filled with calcium hydroxide was the lowest, and the group filled with glass ionomer cement, the group of irritation in that order showed increased concentrations of $LTB_4$ and $LTC_4$ 24 hours after cavity preparation. And there were statistically significant difference in concentrations of $LTB_4$ between the group of irritation and the group filled with calcium hydroxide(p<0.05). 5. The group filled with calcium hydroxide was the lowest, and the group filled with glass ionomer cement, the group of irritation in that order showed increased concentrations of $LTB_4$ and $LTC_4$ 48 hours after cavity preparation. But no statistically difference was found (p>0.05). 6. The concentrations of $LTB_4$ and $LTC_4$ in all experimental groups were highest level at 6 hour after experiment and decreased as time progresses(correlation coefficient>0.8).

• Horticultural Science & Technology
• /
• v.28 no.6
• /
• pp.1072-1077
• /
• 2010

Plant diseases including gray mold caused by Botrytis cinerea are often reduced when calcium compounds are used as alternative materials in paprika. However, much less information is available about the effects of calcium compounds on controlling of $B.$ $cinerea$. Seven calcium compounds such as calcium sulfate dihydrate, calcium chloride, calcium nitrate, calcium oxide, calcium hydroxide, calcium carbonate, and calcium hydride were evaluated for their effectiveness against $B.$ $cinerea$ on potato dextrose agar medium. The pH of selected calcium compounds was higher (pH 8.2-10) than that of the control (pH 6.6). Calcium carbonate, calcium oxide, calcium hydride, and calcium hydroxide among seven calcium compounds were more effectively inhibited the growth of $B.$ $cinerea$ than other calcium compounds. In the case of spraying the spore suspension on paprika applied with the selected four calcium compounds and supplied with the selected calcium supplements in a hydroponic culture system, the paprika treated with calcium compounds showed less severity of disease than those untreated plants. On the basis of our results, we propose that the suppressive effects of calcium compounds on $B.$ $cinerea$ in paprika resulted from the supply of calcium and a certain degree of salt stress.

• Journal of the Korean Ceramic Society
• /
• v.28 no.11
• /
• pp.885-891
• /
• 1991

Calcium hydroxyapatite have been synthesized by a direct precipitation reaction between 0.05 M calcium hydroxide suspension and 0.3 M orthophosphoric acid solution. 0.01 M calcium hydroxide solution was added during the reaction in order to increase the total Ca/P mol ration and reaction pH of the solution. The stoichiometric hydroxyapatite was synthesized over 1.75 as total Ca/P mol ratio, but the calcium-deficient hydroxyapatite was prepared under 1.725 as total Ca/P mol ratio. The nonstoichiometry of the precipitates were interpreted in terms of the pH change during the reaction.

• Journal of Navigation and Port Research
• /
• v.39 no.6
• /
• pp.523-528
• /
• 2015

In this study, we investigated the effects of sulfuric acid on the synthesis of calcium borate in the artificial boron-containing brine (bittern) saturated with calcium hydroxide. For the study, we attempted to synthesize calcium borate under various conditions such as reaction temperature, reaction time, and cooling temperature after heating, and then to examine the recovery and purity of the calcium borate according to the presence or absence of sulfuric acid at each condition. The XRD analysis confirmed that, regardless of the presence of sulfuric acid, the calcium borate ($Ca_2B_2O_5{\cdot}H_2O$) was synthesized, while, in the presence of sulfuric acid, the calcium sulfate ($CaSO_4{\cdot}0.5H_2O$) was produced as a by-product. In all the experiments performed by varying the reaction temperature and time, the recovery and purity of the calcium borate without sulfuric acid were observed higher than those with it. The results indicated that the addition of sulfuric acid increased the solubility of the calcium hydroxide, but the calcium sulfate produced as a by-product could decrease the recovery and purity of the calcium borate by preventing the synthesis. In this study, the artificial boron-containing brine (bittern) (500 mg-B/L) was saturated with calcium hydroxide in the absence of sulfuric acid, and then the solution was heated at $80-105^{\circ}C$ for less than 10 minutes to synthesize the calcium borate. The recovery and purity of calcium borate were measured as high as 80 % and 96 %, respectively.

• Restorative Dentistry and Endodontics
• /
• v.20 no.2
• /
• pp.399-422
• /
• 1995

The purpose of this study was to investigate a fragment of possibility of pulpotomy with the Nd-YAG laser by the observation of pulpal healing process and the fine structural changes of the fibroblasts of the remaining pulpal tissues. Class V cavities on !55 teeth from 4 adult dogs were prepared and the pulp chambers were opened with a sterilized round bur. In the control group(19 teeth), the exposed coronal pulps were excised by a sharp excarvator. After bleeding was controlled with the sterilized cotton pellets, calcium hydroxide powder was applied on the remaining pulpal tissues and the cavities were sealed with Z.O.E. In the experimental group 1 : the pulpotomy with laser-calcium hydroxide powder application group(l9 teeth), the exposed coronal pulps were excised by Nd-YAG laser(10 watts power, 2 psi water, 20 psi air) for 2 or 3 seconds and calcium hydroxide powder was applied on the remaining pulpal tissues and the cavities were sealed with Z.O.E. In the experimental group 2 : the pulpotomy with laser-no calcium hydroxide powder application group(17 teeth), after amputating the coronal pulps with Nd-YAG laser as the experimental group 1, the remaining pulpal tissues were covered with stenilized aluminum foil and the cavities were filled with Z.O.E. The animals were sacrificed at the intervals of 1, 2, 3 and 4 weeks. All the teeth were rouutinely processed and the remaining pulpal tissues were observed by the light microscope and electron microscope. The results were as follows : 1. In light microscopic findings, there was no significant difference of the inflammatory response in the remaining pulpal tissues between the control group and the experimental groups. In both of the experimental group 1 : pulpotomy with laser-calcium hydroxide powder application group and the control group, the dentin bridges were observed after 2 weeks and the structure of the dentin bridge was almost same. In the experimental group 2 : pulpotomy with laser-no calcium hydroxide powder application group, the fibrous layers instead of dentin bridge were observed on the superficial portion of the remaining pulpal tissues after 2 weeks and they were consisted with densely crowded active fibroblasts. 2. In the electronmicroscopic findings, the active fibroblasts in the experimental groups were more frequently observed than in the control group at 1 week. But active fibroblasts were found with same frequency after 2 weeks in all of the control group and the experimental groups. 3. General distortions of the cell such as loss of the cell membrane, vaculoization of the cell etc. were observed at the suberficial layer of the remaining pulpal tissues and the carbonization was found in the dentinal wall in 1 week of the experimental groups. 4. In the experimental group 2 : pulpotomy with laser-no calcium hydroxide powder application group, the activity and the density of the fibroblasts in the fibrous layer were more than those in the deep portion of the remaining pulpal tissues after 2 weeks. 5. In the control group, bacteria such as cocci and bacilli were observed frequently, but in the experimntal groups, they could not be observed.

• Environmental Sciences Bulletin of The Korean Environmental Sciences Society
• /
• v.10 no.S_2
• /
• pp.89-95
• /
• 2001

The solidification and leaching characteristics of cyclone ash collected from an industrial incineration plant were investigated. Cement and calcium hydroxide were used as the solidifying materials. The leaching characteristics of the solidified cyclone ash were found to vary depending on both the quantitative and the qualitative aspects of the solidifying materials. Except for copper and lead, all the heavy metal ions in the leachate of the solidified material composed of 10~20 % cement or 10~20 % calcium hydroxide were found to be within their standard limit. Moreover, all the heavy metal ions were also observed to be within satisfactory limits in the leachate obtained from the solidified material composed of 30 % cement or 30 % calcium hydroxide. Therefore, to satisfy the standard compressive intensity and permissible limits of heavy metal ions leached from solidified material, it would appear that a 30 % proportion of either additive in the solidification product can meet the required standard for the leachate. The cost of solidifying cyclone ash per ton for ash-30 % cement and ash-30 % lime was calculated as 26,750 and 26,070 won, respectively. Accordingly, significant reduction in the waste toxicity and mobility as well as an improvement in the engineering properties of the solidified products were successfully achieved.